[PATCH v2 13/15] arm64: dts: msm8916: thermal: Add interrupt support

Amit Kucheria
2019-08-27T12:15:22Z

Register upper-lower interrupt for the tsens controller.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 8686e101905cc..c0d0492d90ec0 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -176,8 +176,8 @@

thermal-zones {
cpu0_1-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens 5>;

@@ -206,8 +206,8 @@
};

cpu2_3-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens 4>;

@@ -236,8 +236,8 @@
};

gpu-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens 2>;

@@ -256,8 +256,8 @@
};

camera-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens 1>;

@@ -271,8 +271,8 @@
};

modem-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens 0>;

@@ -816,6 +816,8 @@
nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
nvmem-cell-names = "calib", "calib_sel";
#qcom,sensors = <5>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
#thermal-sensor-cells = <1>;
};

--
2.17.1