Re: [PATCH v3 08/11] arm64: dts: qcom: sm8350: Use 2 interconnect cells

[Georgi Djakov <djakov@kernel.org>]

Hi Robert,

On 5.12.22 18:37, Robert Foss wrote:
> Use two interconnect cells in order to optionally
> support a path tag.
> 
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8350.dtsi | 28 ++++++++++++++--------------
>   1 file changed, 14 insertions(+), 14 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> index 805d53d91952..434f8e8b12c1 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> @@ -1543,56 +1543,56 @@ apps_smmu: iommu@15000000 {
>   		config_noc: interconnect@1500000 {
>   			compatible = "qcom,sm8350-config-noc";
>   			reg = <0 0x01500000 0 0xa580>;
> -			#interconnect-cells = <1>;
> +			#interconnect-cells = <2>;
>   			qcom,bcm-voters = <&apps_bcm_voter>;
>   		};
>   
>   		mc_virt: interconnect@1580000 {
>   			compatible = "qcom,sm8350-mc-virt";
>   			reg = <0 0x01580000 0 0x1000>;
> -			#interconnect-cells = <1>;
> +			#interconnect-cells = <2>;
>   			qcom,bcm-voters = <&apps_bcm_voter>;
>   		};
[..]
> @@ -1620,8 +1620,8 @@ ipa: ipa@1e40000 {
>   			clocks = <&rpmhcc RPMH_IPA_CLK>;
>   			clock-names = "core";
>   
> -			interconnects = <&aggre2_noc MASTER_IPA &mc_virt SLAVE_EBI1>,
> -					<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>;
> +			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
> +					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
>   			interconnect-names = "memory",
>   					     "config";
>   
> @@ -1661,7 +1661,7 @@ mpss: remoteproc@4080000 {
>   					<&rpmhpd SM8350_MSS>;
>   			power-domain-names = "cx", "mss";
>   
> -			interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>;
> +			interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1 0>;

The second cell for the first endpoint is missing, so this should be:
	interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;

Thanks,
Georgi

>   
>   			memory-region = <&pil_modem_mem>;
>   
> @@ -2239,7 +2239,7 @@ cdsp: remoteproc@98900000 {
>   					<&rpmhpd SM8350_MXC>;
>   			power-domain-names = "cx", "mxc";
>   
> -			interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>;
> +			interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
>   
>   			memory-region = <&pil_cdsp_mem>;
>   
> @@ -2421,14 +2421,14 @@ usb_2_ssphy: phy@88ebe00 {
>   		dc_noc: interconnect@90c0000 {
>   			compatible = "qcom,sm8350-dc-noc";
>   			reg = <0 0x090c0000 0 0x4200>;
> -			#interconnect-cells = <1>;
> +			#interconnect-cells = <2>;
>   			qcom,bcm-voters = <&apps_bcm_voter>;
>   		};
>   
>   		gem_noc: interconnect@9100000 {
>   			compatible = "qcom,sm8350-gem-noc";
>   			reg = <0 0x09100000 0 0xb4000>;
> -			#interconnect-cells = <1>;
> +			#interconnect-cells = <2>;
>   			qcom,bcm-voters = <&apps_bcm_voter>;
>   		};
>