From: Bhaumik Bhatt <bbhatt@codeaurora.org>
To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, hemantk@codeaurora.org,
jhugo@codeaurora.org, loic.poulain@linaro.org,
kvalo@codeaurora.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/6] bus: mhi: core: Allow receiving a STOP channel command response
Date: Mon, 16 Nov 2020 09:36:09 -0800 [thread overview]
Message-ID: <616fe76b6757e8d545cfaaba1ab3ab50@codeaurora.org> (raw)
In-Reply-To: <20201116071339.GI3926@Mani-XPS-13-9360>
Hi Mani,
On 2020-11-15 23:13, Manivannan Sadhasivam wrote:
> On Wed, Nov 11, 2020 at 11:21:08AM -0800, Bhaumik Bhatt wrote:
>> Add support to receive the response to a STOP channel command to the
>> MHI bus. If a client would like to STOP a channel instead of issuing
>> a RESET to it, this would provide support for it.
>>
>> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
>> ---
>> drivers/bus/mhi/core/init.c | 5 +++--
>> drivers/bus/mhi/core/main.c | 5 +++++
>> 2 files changed, 8 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
>> index 8cefa35..4d34d62 100644
>> --- a/drivers/bus/mhi/core/init.c
>> +++ b/drivers/bus/mhi/core/init.c
>> @@ -1267,8 +1267,9 @@ static int mhi_driver_remove(struct device *dev)
>>
>> mutex_lock(&mhi_chan->mutex);
>>
>> - if (ch_state[dir] == MHI_CH_STATE_ENABLED &&
>> - !mhi_chan->offload_ch)
>> + if ((ch_state[dir] == MHI_CH_STATE_ENABLED ||
>> + ch_state[dir] == MHI_CH_STATE_STOP) &&
>
> This enum is not defined in this patch so it'll break. Please add a
> separate
> patch which introduces the new state enums alone and then have patches
> 1/2
> as a followup.
>
It is actually already defined and present in internal.h as enum
mhi_ch_state.
The old set of enums has MHI_CH_STATE_STOP from enum mhi_ch_state and
the new
enum I introduced is MHI_CH_STATE_TYPE_STOP from enum enum
mhi_ch_state_type.
If it seems confusing, suggestions to renaming them are welcome.
> Also this change is not belonging to this commit I believe.
>
I included this change here because, a channel can be in "stopped" state
and
a user module could be unloaded or a crash could force a driver remove
leading
us to come this check.
If you think I should move it as a separate patch, let me know.
> Thanks,
> Mani
>
>> + !mhi_chan->offload_ch)
>> mhi_deinit_chan_ctxt(mhi_cntrl, mhi_chan);
>>
>> mhi_chan->ch_state = MHI_CH_STATE_DISABLED;
>> diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
>> index f953e2a..ad881a1 100644
>> --- a/drivers/bus/mhi/core/main.c
>> +++ b/drivers/bus/mhi/core/main.c
>> @@ -1194,6 +1194,11 @@ int mhi_send_cmd(struct mhi_controller
>> *mhi_cntrl,
>> cmd_tre->dword[0] = MHI_TRE_CMD_RESET_DWORD0;
>> cmd_tre->dword[1] = MHI_TRE_CMD_RESET_DWORD1(chan);
>> break;
>> + case MHI_CMD_STOP_CHAN:
>> + cmd_tre->ptr = MHI_TRE_CMD_STOP_PTR;
>> + cmd_tre->dword[0] = MHI_TRE_CMD_STOP_DWORD0;
>> + cmd_tre->dword[1] = MHI_TRE_CMD_STOP_DWORD1(chan);
>> + break;
>> case MHI_CMD_START_CHAN:
>> cmd_tre->ptr = MHI_TRE_CMD_START_PTR;
>> cmd_tre->dword[0] = MHI_TRE_CMD_START_DWORD0;
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
>> Forum,
>> a Linux Foundation Collaborative Project
>>
Thanks,
Bhaumik
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2020-11-16 17:36 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-11 19:21 [PATCH v2 0/6] Updates to MHI channel handling Bhaumik Bhatt
2020-11-11 19:21 ` [PATCH v2 1/6] bus: mhi: core: Allow receiving a STOP channel command response Bhaumik Bhatt
2020-11-16 7:13 ` Manivannan Sadhasivam
2020-11-16 17:36 ` Bhaumik Bhatt [this message]
2020-11-21 17:16 ` Manivannan Sadhasivam
2020-11-24 0:23 ` Bhaumik Bhatt
2020-11-11 19:21 ` [PATCH v2 2/6] bus: mhi: core: Improvements to the channel handling state machine Bhaumik Bhatt
2020-11-16 10:22 ` Manivannan Sadhasivam
2020-11-11 19:21 ` [PATCH v2 3/6] bus: mhi: core: Add support to stop or start channel data transfers Bhaumik Bhatt
2020-11-16 12:43 ` Manivannan Sadhasivam
2020-11-16 20:56 ` Bhaumik Bhatt
2020-11-21 17:05 ` Manivannan Sadhasivam
2020-11-24 0:45 ` Bhaumik Bhatt
2020-11-11 19:21 ` [PATCH v2 4/6] bus: mhi: core: Check execution environment for channel before issuing reset Bhaumik Bhatt
2020-11-11 19:21 ` [PATCH v2 5/6] bus: mhi: core: Remove __ prefix for MHI channel unprepare function Bhaumik Bhatt
2020-11-16 12:47 ` Manivannan Sadhasivam
2020-11-11 19:21 ` [PATCH v2 6/6] bus: mhi: Improve documentation on channel transfer setup APIs Bhaumik Bhatt
2020-11-16 12:50 ` Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=616fe76b6757e8d545cfaaba1ab3ab50@codeaurora.org \
--to=bbhatt@codeaurora.org \
--cc=hemantk@codeaurora.org \
--cc=jhugo@codeaurora.org \
--cc=kvalo@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=loic.poulain@linaro.org \
--cc=manivannan.sadhasivam@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).