Re: [PATCH v3 1/4] dt-bindings: firmware: qcom,scm: support indicating SDI default state

[Mukesh Ojha <quic_mojha@quicinc.com>]

On 8/16/2023 10:15 PM, Robert Marko wrote:
> IPQ5018 has SDI (Secure Debug Image) enabled by TZ by default, and that
> means that WDT being asserted or just trying to reboot will hang the board
> in the debug mode and only pulling the power and repowering will help.
> Some IPQ4019 boards like Google WiFI have it enabled as well.
> 
> So, lets add a boolean property to indicate that SDI is enabled by default
> and thus needs to be disabled by the kernel.
> 
> Signed-off-by: Robert Marko <robimarko@gmail.com>

Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>

-Mukesh

> ---
> Changes in v3:
> * Change the property so it indicates that SDI has been enabled by default
> ---
>   Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 8 ++++++++
>   1 file changed, 8 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
> index 4233ea839bfc..590bbbd61de5 100644
> --- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
> +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
> @@ -89,6 +89,14 @@ properties:
>         protocol to handle sleeping SCM calls.
>       maxItems: 1
>   
> +  qcom,sdi-enabled:
> +    description:
> +      Indicates that the SDI (Secure Debug Image) has been enabled by TZ
> +      by default and it needs to be disabled.
> +      If not disabled WDT assertion or reboot will cause the board to hang
> +      in the debug mode.
> +    type: boolean
> +
>     qcom,dload-mode:
>       $ref: /schemas/types.yaml#/definitions/phandle-array
>       items: