Re: [PATCH v4 4/4] arm64: dts: qcom: sdm845: do not customize SPI0 pin drive/bias

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 22.12.2022 16:13, Krzysztof Kozlowski wrote:
> Each board should define pin drive/bias for used busses.  All boards
> using SPI0 (db845c and cheza) already do it, so drop the bias/drive
> strength from SoC DTSI.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> 
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> 
> Cc: Doug Anderson <dianders@chromium.org>
> 
> Changes since v3:
> 1. Rb tag
> 
> Changes since v2:
> 1. New patch.
> ---
>  arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 --
>  1 file changed, 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index dcea535de9b7..cac70212cc2a 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -2785,8 +2785,6 @@ qup_i2c15_default: qup-i2c15-default-state {
>  			qup_spi0_default: qup-spi0-default-state {
>  				pins = "gpio0", "gpio1", "gpio2", "gpio3";
>  				function = "qup0";
> -				drive-strength = <6>;
> -				bias-disable;
>  			};
>  
>  			qup_spi1_default: qup-spi1-default-state {