linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: cang@codeaurora.org
To: Vivek Gautam <vivek.gautam@codeaurora.org>
Cc: dianders@chromium.org, subhashj@codeaurora.org,
	asutoshd@codeaurora.org, evgreen@chromium.org,
	rnayak@codeaurora.org, vinholikatti@gmail.com,
	jejb@linux.vnet.ibm.com, martin.petersen@oracle.com,
	linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	Venkat Gopalakrishnan <venkatg@codeaurora.org>,
	open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3 1/1] scsi: ufs: make UFS Tx lane1 clock optional for QCOM platforms
Date: Fri, 12 Oct 2018 14:46:55 +0800	[thread overview]
Message-ID: <6d24a84708f5682df0540d852f60314d@codeaurora.org> (raw)
In-Reply-To: <462df3c4-582b-ccf1-8ced-e0c084bca0f2@codeaurora.org>

Hi,

On 2018-10-12 14:10, Vivek Gautam wrote:
> On 10/12/2018 6:42 AM, Can Guo wrote:
>> From: Venkat Gopalakrishnan <venkatg@codeaurora.org>
>> 
>> Per Qcom's UFS host controller HW design, the UFS Tx lane1 clock could 
>> be
>> muxed with Tx lane0 clock, hence keep Tx lane1 clock optional by 
>> ignoring
>> it if it is not provided in device tree. This change also performs 
>> some
>> cleanup to lanes per direction checks when enable/disable lane clocks 
>> just
>> for symmetry.
>> 
>> Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
>> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
>> Signed-off-by: Can Guo <cang@codeaurora.org>
>> ---
>> Changes since v2:
>> - Incorporated review comments from Doug.
>> 
>> Changes since v1:
>> - Incorporated review comments from Doug.
>> - Update the commit title and commit message.
>> 
>>   drivers/scsi/ufs/ufs-qcom.c | 55 
>> ++++++++++++++++++++++++---------------------
>>   1 file changed, 29 insertions(+), 26 deletions(-)
>> 
>> diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
>> index 2b38db2..dbc84cb 100644
>> --- a/drivers/scsi/ufs/ufs-qcom.c
>> +++ b/drivers/scsi/ufs/ufs-qcom.c
>> @@ -79,20 +79,28 @@ static int ufs_qcom_get_connected_tx_lanes(struct 
>> ufs_hba *hba, u32 *tx_lanes)
>>   }
>>     static int ufs_qcom_host_clk_get(struct device *dev,
>> -		const char *name, struct clk **clk_out)
>> +		const char *name, struct clk **clk_out, bool optional)
>>   {
>>   	struct clk *clk;
>>   	int err = 0;
>>     	clk = devm_clk_get(dev, name);
>> -	if (IS_ERR(clk)) {
>> -		err = PTR_ERR(clk);
>> -		dev_err(dev, "%s: failed to get %s err %d",
>> -				__func__, name, err);
>> -	} else {
>> +	if (!IS_ERR(clk)) {
>>   		*clk_out = clk;
>> +		return 0;
>>   	}
>>   +	err = PTR_ERR(clk);
>> +
>> +	if (optional && err == -ENOENT) {
>> +		*clk_out = NULL;
>> +		return 0;
>> +	}
>> +
>> +	if (err != -EPROBE_DEFER)
>> +		dev_err(dev, "failed to get %s err %d",
>> +				name, err);
>> +
>>   	return err;
>>   }
>>   @@ -113,11 +121,9 @@ static void ufs_qcom_disable_lane_clks(struct 
>> ufs_qcom_host *host)
>>   	if (!host->is_lane_clks_enabled)
>>   		return;
>>   -	if (host->hba->lanes_per_direction > 1)
>> -		clk_disable_unprepare(host->tx_l1_sync_clk);
>> +	clk_disable_unprepare(host->tx_l1_sync_clk);
>>   	clk_disable_unprepare(host->tx_l0_sync_clk);
>> -	if (host->hba->lanes_per_direction > 1)
>> -		clk_disable_unprepare(host->rx_l1_sync_clk);
>> +	clk_disable_unprepare(host->rx_l1_sync_clk);
>>   	clk_disable_unprepare(host->rx_l0_sync_clk);
>>     	host->is_lane_clks_enabled = false;
>> @@ -141,24 +147,21 @@ static int ufs_qcom_enable_lane_clks(struct 
>> ufs_qcom_host *host)
>>   	if (err)
>>   		goto disable_rx_l0;
>>   -	if (host->hba->lanes_per_direction > 1) {
>> -		err = ufs_qcom_host_clk_enable(dev, "rx_lane1_sync_clk",
>> +	err = ufs_qcom_host_clk_enable(dev, "rx_lane1_sync_clk",
>>   			host->rx_l1_sync_clk);
>> -		if (err)
>> -			goto disable_tx_l0;
>> +	if (err)
>> +		goto disable_tx_l0;
>>   -		err = ufs_qcom_host_clk_enable(dev, "tx_lane1_sync_clk",
>> +	err = ufs_qcom_host_clk_enable(dev, "tx_lane1_sync_clk",
>>   			host->tx_l1_sync_clk);
>> -		if (err)
>> -			goto disable_rx_l1;
>> -	}
>> +	if (err)
>> +		goto disable_rx_l1;
>>     	host->is_lane_clks_enabled = true;
>>   	goto out;
>>     disable_rx_l1:
>> -	if (host->hba->lanes_per_direction > 1)
>> -		clk_disable_unprepare(host->rx_l1_sync_clk);
>> +	clk_disable_unprepare(host->rx_l1_sync_clk);
>>   disable_tx_l0:
>>   	clk_disable_unprepare(host->tx_l0_sync_clk);
>>   disable_rx_l0:
>> @@ -172,25 +175,25 @@ static int ufs_qcom_init_lane_clks(struct 
>> ufs_qcom_host *host)
>>   	int err = 0;
>>   	struct device *dev = host->hba->dev;
>>   -	err = ufs_qcom_host_clk_get(dev,
>> -			"rx_lane0_sync_clk", &host->rx_l0_sync_clk);
>> +	err = ufs_qcom_host_clk_get(dev, "rx_lane0_sync_clk",
>> +					&host->rx_l0_sync_clk, false);
>>   	if (err)
>>   		goto out;
>>   -	err = ufs_qcom_host_clk_get(dev,
>> -			"tx_lane0_sync_clk", &host->tx_l0_sync_clk);
>> +	err = ufs_qcom_host_clk_get(dev, "tx_lane0_sync_clk",
>> +					&host->tx_l0_sync_clk, false);
>>   	if (err)
>>   		goto out;
>>     	/* In case of single lane per direction, don't read lane1 clocks 
>> */
>>   	if (host->hba->lanes_per_direction > 1) {
>>   		err = ufs_qcom_host_clk_get(dev, "rx_lane1_sync_clk",
>> -			&host->rx_l1_sync_clk);
>> +			&host->rx_l1_sync_clk, false);
>>   		if (err)
>>   			goto out;
>>     		err = ufs_qcom_host_clk_get(dev, "tx_lane1_sync_clk",
>> -			&host->tx_l1_sync_clk);
>> +			&host->tx_l1_sync_clk, true);
>>   	}
>>   out:
>>   	return err;
> 
> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
> 
> Best regards
> Vivek

Thank you Vivek.

-Can Guo

  reply	other threads:[~2018-10-12  6:46 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-12  1:12 [PATCH v3 1/1] scsi: ufs: make UFS Tx lane1 clock optional for QCOM platforms Can Guo
2018-10-12  6:10 ` Vivek Gautam
2018-10-12  6:46   ` cang [this message]
2018-10-12 16:55 ` Doug Anderson
2018-10-13  2:13   ` cang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6d24a84708f5682df0540d852f60314d@codeaurora.org \
    --to=cang@codeaurora.org \
    --cc=asutoshd@codeaurora.org \
    --cc=dianders@chromium.org \
    --cc=evgreen@chromium.org \
    --cc=jejb@linux.vnet.ibm.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=rnayak@codeaurora.org \
    --cc=subhashj@codeaurora.org \
    --cc=venkatg@codeaurora.org \
    --cc=vinholikatti@gmail.com \
    --cc=vivek.gautam@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).