Re: [PATCH v4 8/8] arm64: dts: qcom: sdm660-xiaomi-lavender: Add USB

[Caleb Connolly <caleb@connolly.tech>]

On 20/11/2021 21:42, Dang Huynh wrote:
> From: Alexey Min <alexey.min@gmail.com>
>
> Enable and configure DWC3 and QUSB2 PHY to enable USB
> functionality on the Redmi Note 7.
>
> Signed-off-by: Alexey Min <alexey.min@gmail.com>
> Co-developed-by: Dang Huynh <danct12@riseup.net>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
> Signed-off-by: Dang Huynh <danct12@riseup.net>
> ---
>   .../boot/dts/qcom/sdm660-xiaomi-lavender.dts  | 25 +++++++++++++++++++
>   1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
> index 45e58714af71..6cdd9f7c864b 100644
> --- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
> @@ -79,6 +79,15 @@ framebuffer_mem: memory@9d400000 {
>   			no-map;
>   		};
>   	};
> +
> +	/*
> +	 * Until we hook up type-c detection, we
> +	 * have to stick with this. But it works.
> +	 */
> +	extcon_usb: extcon-usb {
> +		compatible = "linux,extcon-usb-gpio";
> +		id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>;
> +	};
>   };
>
>   &blsp1_uart2 {
> @@ -95,6 +104,13 @@ &pon_resin {
>   	linux,code = <KEY_VOLUMEDOWN>;
>   };
>
> +&qusb2phy {
> +	status = "okay";
> +
> +	vdd-supply = <&vreg_l1b_0p925>;
> +	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
> +};
> +
>   &rpm_requests {
>   	pm660l-regulators {
>   		compatible = "qcom,rpm-pm660l-regulators";
> @@ -370,3 +386,12 @@ &sdhc_2 {
>   &tlmm {
>   	gpio-reserved-ranges = <8 4>;
>   };
> +
> +&usb3 {
> +	status = "okay";
> +};
> +
> +&usb3_dwc3 {
> +	dr_mode = "peripheral";
> +	extcon = <&extcon_usb>;
> +};
> --
> 2.33.1
>

Reviewed-by: Caleb Connolly <caleb@connolly>

--
Kind Regards,
Caleb