Re: [PATCH 5/6] ARM: dts: qcom: sdx65-mtp: Enable PCIE0 PHY

[Rohit Agarwal <quic_rohiagar@quicinc.com>]

On 3/6/2023 4:00 PM, Konrad Dybcio wrote:
>
> On 6.03.2023 06:25, Rohit Agarwal wrote:
>> Enable PCIE0 PHY on SDX65 MTP for PCIE EP.
>>
>> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
>> ---
> Status should go last. It would be nice if you could update
> that for the other nodes in this dt while at it.

Yes, Surely will do.

Thanks,
Rohit.
>
> Konrad
>>   arch/arm/boot/dts/qcom-sdx65-mtp.dts | 7 +++++++
>>   1 file changed, 7 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
>> index 85ea02d..86bb853 100644
>> --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
>> +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
>> @@ -245,6 +245,13 @@
>>   	status = "okay";
>>   };
>>   
>> +&pcie0_phy {
>> +	status = "okay";
>> +
>> +	vdda-phy-supply = <&vreg_l1b_1p2>;
>> +	vdda-pll-supply = <&vreg_l4b_0p88>;
>> +};
>> +
>>   &qpic_bam {
>>   	status = "okay";
>>   };