linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: quic_dikshita@quicinc.com,
	Vikash Garodia <quic_vgarodia@quicinc.com>,
	Abhinav Kumar <quic_abhinavk@quicinc.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-media@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Vedang Nagar <quic_vnagar@quicinc.com>
Subject: Re: [PATCH v3 12/29] media: iris: implement s_fmt, g_fmt and try_fmt ioctls
Date: Tue, 24 Sep 2024 15:41:53 +0100	[thread overview]
Message-ID: <78fbe221-57c3-495b-a9d8-2e40a1612e40@linaro.org> (raw)
In-Reply-To: <20240827-iris_v3-v3-12-c5fdbbe65e70@quicinc.com>

On 27/08/2024 11:05, Dikshita Agarwal via B4 Relay wrote:
> From: Vedang Nagar <quic_vnagar@quicinc.com>
> 
> Implement s_fmt, g_fmt and try_fmt IOCTL ops in
> the driver with necessary hooks.
> 
> Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
> Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>

> +
> +	src_q = v4l2_m2m_get_src_vq(m2m_ctx);
> +	memset(pixmp->reserved, 0, sizeof(pixmp->reserved));
> +	if (V4L2_TYPE_IS_OUTPUT(f->type)) {
> +		if (f->fmt.pix_mp.pixelformat != V4L2_PIX_FMT_H264) {
> +			f_inst = inst->fmt_src;
> +			f->fmt.pix_mp.width = f_inst->fmt.pix_mp.width;
> +			f->fmt.pix_mp.height = f_inst->fmt.pix_mp.height;
> +			f->fmt.pix_mp.pixelformat = f_inst->fmt.pix_mp.pixelformat;
> +		}
> +	} else if (V4L2_TYPE_IS_CAPTURE(f->type)) {
> +		if (f->fmt.pix_mp.pixelformat != V4L2_PIX_FMT_NV12) {
> +			f_inst = inst->fmt_dst;
> +			f->fmt.pix_mp.pixelformat = f_inst->fmt.pix_mp.pixelformat;
> +			f->fmt.pix_mp.width = f_inst->fmt.pix_mp.width;
> +			f->fmt.pix_mp.height = f_inst->fmt.pix_mp.height;
> +		}
> +		if (vb2_is_streaming(src_q)) {
> +			f_inst = inst->fmt_src;
> +			f->fmt.pix_mp.height = f_inst->fmt.pix_mp.height;
> +			f->fmt.pix_mp.width = f_inst->fmt.pix_mp.width;
> +		}
> +	} else {
> +		return -EINVAL;
> +	}
> +

<snip>

> +int iris_vdec_s_fmt(struct iris_inst *inst, struct v4l2_format *f)
> +{
> +	struct v4l2_format *fmt, *output_fmt;
> +	struct vb2_queue *q;
> +	u32 codec_align;
> +
> +	int ret = 0;
> +
> +	q = v4l2_m2m_get_vq(inst->m2m_ctx, f->type);
> +	if (!q)
> +		return -EINVAL;
> +
> +	iris_vdec_try_fmt(inst, f);
> +
> +	if (V4L2_TYPE_IS_OUTPUT(f->type)) {

<snip>

> +		
> +	} else if (V4L2_TYPE_IS_CAPTURE(f->type)) {

<snip>
> +	} else {
> +		return -EINVAL;
> +	}

I'd switch this instead of if/elsing.

A blanket comment for this series.



  reply	other threads:[~2024-09-24 14:41 UTC|newest]

Thread overview: 93+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-27 10:05 [PATCH v3 00/29] Qualcomm iris video decoder driver Dikshita Agarwal via B4 Relay
2024-08-27 10:05 ` [PATCH v3 01/29] dt-bindings: media: Add sm8550 dt schema Dikshita Agarwal via B4 Relay
2024-08-27 10:42   ` Krzysztof Kozlowski
2024-09-05  5:41     ` Dikshita Agarwal
2024-08-27 10:05 ` [PATCH v3 02/29] media: MAINTAINERS: Add Qualcomm Iris video accelerator driver Dikshita Agarwal via B4 Relay
2024-08-27 10:42   ` Krzysztof Kozlowski
2024-09-05  5:47     ` Dikshita Agarwal
2024-09-05 10:10       ` Dmitry Baryshkov
2024-09-05 11:02         ` Dikshita Agarwal
2024-09-05 11:02           ` Dmitry Baryshkov
2024-09-05 11:14             ` Dikshita Agarwal
2024-08-27 10:05 ` [PATCH v3 03/29] media: iris: add platform driver for iris video device Dikshita Agarwal via B4 Relay
2024-08-27 14:08   ` Bryan O'Donoghue
2024-08-29  9:13     ` Dmitry Baryshkov
2024-08-29  9:36       ` Bryan O'Donoghue
2024-09-05  6:12       ` Dikshita Agarwal
2024-09-05  6:15         ` Dikshita Agarwal
2024-09-05 10:11           ` Dmitry Baryshkov
2024-09-05 10:59             ` Dikshita Agarwal
2024-09-05 11:07               ` Dmitry Baryshkov
2024-09-05 11:13                 ` Dikshita Agarwal
2024-08-27 10:05 ` [PATCH v3 04/29] media: iris: initialize power resources Dikshita Agarwal via B4 Relay
2024-08-27 10:51   ` Krzysztof Kozlowski
2024-09-05 11:53     ` Dikshita Agarwal
2024-09-05 11:57       ` Krzysztof Kozlowski
2024-09-06 11:21         ` Vikash Garodia
2024-09-06 12:04           ` Krzysztof Kozlowski
2024-09-06 19:47             ` Vikash Garodia
2024-09-07  9:07               ` Krzysztof Kozlowski
2024-08-27 10:05 ` [PATCH v3 05/29] media: iris: implement iris v4l2 file ops Dikshita Agarwal via B4 Relay
2024-09-06 19:05   ` Markus Elfring
2024-09-07  8:52   ` Markus Elfring
2024-08-27 10:05 ` [PATCH v3 06/29] media: iris: introduce iris core state management with shared queues Dikshita Agarwal via B4 Relay
2024-08-28  2:38   ` kernel test robot
2024-08-27 10:05 ` [PATCH v3 07/29] media: iris: implement video firmware load/unload Dikshita Agarwal via B4 Relay
2024-08-27 23:13   ` kernel test robot
2024-08-31 13:18   ` Bryan O'Donoghue
2024-09-02  0:04     ` Dmitry Baryshkov
2024-09-05  6:17       ` Dikshita Agarwal
2024-08-27 10:05 ` [PATCH v3 08/29] media: iris: implement boot sequence of the firmware Dikshita Agarwal via B4 Relay
2024-09-05 12:34   ` Bryan O'Donoghue
2024-09-06 11:27     ` Vikash Garodia
2024-08-27 10:05 ` [PATCH v3 09/29] media: iris: introduce Host firmware interface with necessary hooks Dikshita Agarwal via B4 Relay
2024-09-05 12:36   ` Bryan O'Donoghue
2024-09-24  9:13     ` Dikshita Agarwal
2024-09-05 13:10   ` Bryan O'Donoghue
2024-09-06 13:31     ` Vikash Garodia
2024-08-27 10:05 ` [PATCH v3 10/29] media: iris: implement power management Dikshita Agarwal via B4 Relay
2024-09-05 13:23   ` Bryan O'Donoghue
2024-09-05 13:46     ` Krzysztof Kozlowski
2024-09-24  8:38       ` Dikshita Agarwal
2024-09-24  8:36     ` Dikshita Agarwal
2024-08-27 10:05 ` [PATCH v3 11/29] media: iris: implement reqbuf ioctl with vb2_queue_setup Dikshita Agarwal via B4 Relay
2024-09-06 12:50   ` Bryan O'Donoghue
2024-09-06 13:05     ` Bryan O'Donoghue
2024-09-26 10:47     ` Dikshita Agarwal
2024-08-27 10:05 ` [PATCH v3 12/29] media: iris: implement s_fmt, g_fmt and try_fmt ioctls Dikshita Agarwal via B4 Relay
2024-09-24 14:41   ` Bryan O'Donoghue [this message]
2024-09-26 10:49     ` Dikshita Agarwal
2024-08-27 10:05 ` [PATCH v3 13/29] media: iris: implement g_selection ioctl Dikshita Agarwal via B4 Relay
2024-08-27 10:05 ` [PATCH v3 14/29] media: iris: implement enum_fmt and enum_frameintervals ioctls Dikshita Agarwal via B4 Relay
2024-08-27 10:05 ` [PATCH v3 15/29] media: iris: implement subscribe_event and unsubscribe_event ioctls Dikshita Agarwal via B4 Relay
2024-08-27 10:05 ` [PATCH v3 16/29] media: iris: implement iris v4l2_ctrl_ops and prepare capabilities Dikshita Agarwal via B4 Relay
2024-08-29  9:33   ` Dmitry Baryshkov
2024-10-01 13:01     ` Vedang Nagar
2024-10-06 16:46       ` Dmitry Baryshkov
2024-08-27 10:05 ` [PATCH v3 17/29] media: iris: implement query_cap, query_ctrl and query_menu ioctls Dikshita Agarwal via B4 Relay
2024-09-24 14:49   ` Bryan O'Donoghue
2024-09-26 10:50     ` Dikshita Agarwal
2024-08-27 10:05 ` [PATCH v3 18/29] media: iris: implement vb2 streaming ops Dikshita Agarwal via B4 Relay
2024-08-28  0:26   ` kernel test robot
2024-08-27 10:05 ` [PATCH v3 19/29] media: iris: implement set properties to firmware during streamon Dikshita Agarwal via B4 Relay
2024-09-24 15:09   ` Bryan O'Donoghue
2024-08-27 10:05 ` [PATCH v3 20/29] media: iris: subscribe parameters and properties to firmware for hfi_gen2 Dikshita Agarwal via B4 Relay
2024-09-24 15:16   ` Bryan O'Donoghue
2024-09-26 10:55     ` Dikshita Agarwal
2024-08-27 10:05 ` [PATCH v3 21/29] media: iris: allocate, initialize and queue internal buffers Dikshita Agarwal via B4 Relay
2024-08-27 10:05 ` [PATCH v3 22/29] media: iris: implement vb2 ops for buf_queue and firmware response Dikshita Agarwal via B4 Relay
2024-08-27 10:05 ` [PATCH v3 23/29] media: iris: add support for dynamic resolution change Dikshita Agarwal via B4 Relay
2024-08-27 10:05 ` [PATCH v3 24/29] media: iris: handle streamoff/on from client in " Dikshita Agarwal via B4 Relay
2024-08-27 10:05 ` [PATCH v3 25/29] media: iris: add support for drain sequence Dikshita Agarwal via B4 Relay
2024-08-27 10:05 ` [PATCH v3 26/29] media: iris: add check whether the video session is supported or not Dikshita Agarwal via B4 Relay
2024-08-27 10:05 ` [PATCH v3 27/29] media: iris: implement power scaling for vpu2 and vpu3 Dikshita Agarwal via B4 Relay
2024-08-27 10:05 ` [PATCH v3 28/29] media: iris: add allow checks for v4l2 ioctls Dikshita Agarwal via B4 Relay
2024-08-27 10:05 ` [PATCH v3 29/29] media: iris: add check to allow sub states transitions Dikshita Agarwal via B4 Relay
2024-08-27 13:41 ` [PATCH v3 00/29] Qualcomm iris video decoder driver neil.armstrong
2024-09-24  9:13   ` Dikshita Agarwal
2024-10-01 13:28     ` Neil Armstrong
2024-08-31 15:18 ` Bryan O'Donoghue
2024-09-02  0:02   ` Dmitry Baryshkov
2024-09-06 14:19     ` Nicolas Dufresne
2024-09-06 19:26       ` Vikash Garodia
2024-09-06 16:28     ` Abhinav Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=78fbe221-57c3-495b-a9d8-2e40a1612e40@linaro.org \
    --to=bryan.odonoghue@linaro.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=quic_abhinavk@quicinc.com \
    --cc=quic_dikshita@quicinc.com \
    --cc=quic_vgarodia@quicinc.com \
    --cc=quic_vnagar@quicinc.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).