Re: [PATCH 4/6] drm/bridge: aux: allow interlaced and YCbCr 420 output

[Neil Armstrong <neil.armstrong@linaro.org>]

On 18/10/2024 23:49, Dmitry Baryshkov wrote:
> As both aux bridges are merely passthrough bridges, mark them as
> supporting interlaced and YCbCr 420 data. Other bridges in the chain
> still might limit interlaced and YCbCr 420 data support on the
> corresponding connector.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>   drivers/gpu/drm/bridge/aux-bridge.c     | 4 ++++
>   drivers/gpu/drm/bridge/aux-hpd-bridge.c | 4 ++++
>   2 files changed, 8 insertions(+)
> 
> diff --git a/drivers/gpu/drm/bridge/aux-bridge.c b/drivers/gpu/drm/bridge/aux-bridge.c
> index b29980f95379..e3e95ccec1ae 100644
> --- a/drivers/gpu/drm/bridge/aux-bridge.c
> +++ b/drivers/gpu/drm/bridge/aux-bridge.c
> @@ -120,6 +120,10 @@ static int drm_aux_bridge_probe(struct auxiliary_device *auxdev,
>   	data->bridge.funcs = &drm_aux_bridge_funcs;
>   	data->bridge.of_node = data->dev->of_node;
>   
> +	/* passthrough data, allow everything */
> +	data->bridge.interlace_allowed = true;
> +	data->bridge.ycbcr_420_allowed = true;
> +
>   	return devm_drm_bridge_add(data->dev, &data->bridge);
>   }
>   
> diff --git a/drivers/gpu/drm/bridge/aux-hpd-bridge.c b/drivers/gpu/drm/bridge/aux-hpd-bridge.c
> index 6886db2d9e00..48f297c78ee6 100644
> --- a/drivers/gpu/drm/bridge/aux-hpd-bridge.c
> +++ b/drivers/gpu/drm/bridge/aux-hpd-bridge.c
> @@ -180,6 +180,10 @@ static int drm_aux_hpd_bridge_probe(struct auxiliary_device *auxdev,
>   	data->bridge.ops = DRM_BRIDGE_OP_HPD;
>   	data->bridge.type = id->driver_data;
>   
> +	/* passthrough data, allow everything */
> +	data->bridge.interlace_allowed = true;
> +	data->bridge.ycbcr_420_allowed = true;
> +
>   	auxiliary_set_drvdata(auxdev, data);
>   
>   	return devm_drm_bridge_add(data->dev, &data->bridge);
> 

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>