Re: [RESEND v6 6/8] arm64: dts: qcom: sc7280: Modify VA/RX/TX macro clock nodes for audioreach solution

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 16.06.2023 12:35, Mohammad Rafi Shaik wrote:
> From: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
> 
> Modify VA, RX and TX macro and lpass_tlmm clock properties and
> enable them. For audioreach solution mclk, npl and fsgen clocks
> are enabled through the q6prm clock driver.
> 
> Delete the power domain properties from VA, RX and TX macro,
> for audioreach solution the macro, dcodec power domains enabled
> through the q6prm clock driver.
> 
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
> Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
> ---
Maybe sc7280-audioreach.dtsi containing all these changes that could be
reused by others would be in order?

>  .../sc7280-herobrine-audioreach-wcd9385.dtsi  | 43 +++++++++++++++++++
>  1 file changed, 43 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> index 9daea1b25656..c02ca393378f 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> @@ -196,3 +196,46 @@ q6prmcc: clock-controller {
>  		};
>  	};
>  };
> +
> +&lpass_rx_macro {
> +	/delete-property/ power-domains;
> +	/delete-property/ power-domain-names;
Surely they shouldn't cause issues, even if the vote would be
superfluous? They are still powered by these power domains, I'd assume?

> +	clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +		 <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK  LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +		 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +		 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +		 <&lpass_va_macro>;
> +	clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
The drivers use clk_get with name-based lookup.. you should be able to
simply extend the list in the common DTSI. Please test that on both
audioreach and the other thing though.

Konrad

> +
> +	status = "okay";
> +};
> +
> +&lpass_tlmm {
> +	clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +		 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
> +	clock-names = "core", "audio";
> +};
> +
> +&lpass_tx_macro {
> +	/delete-property/ power-domains;
> +	/delete-property/ power-domain-names;
> +	clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +		 <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK  LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +		 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +		 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +		 <&lpass_va_macro>;
> +	clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
> +
> +	status = "okay";
> +};
> +
> +&lpass_va_macro {
> +	/delete-property/ power-domains;
> +	/delete-property/ power-domain-names;
> +	clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +		 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +		 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
> +	clock-names = "mclk", "macro", "dcodec";
> +
> +	status = "okay";
> +};