From: Rajendra Nayak <quic_rjendra@quicinc.com>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: agross@kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org, swboyd@chromium.org,
mka@chromium.org
Subject: Re: [PATCH v2 2/3] soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280
Date: Thu, 9 Dec 2021 12:29:12 +0530 [thread overview]
Message-ID: <7e9f6cbe-17c9-53ff-95a8-2f2bbdeb1d23@quicinc.com> (raw)
In-Reply-To: <YbEYyGHqaHGeRXsV@builder.lan>
On 12/9/2021 2:12 AM, Bjorn Andersson wrote:
> On Tue 07 Dec 04:08 CST 2021, Rajendra Nayak wrote:
>
>> While the requirement to specify the active + sleep and active-only MX
>> power-domains as the parents of the corresponding CX power domains is
>> applicable for most SoCs, we have some like the sc7280 where this
>> dependency is not applicable.
>> Define new rpmhpd structs for cx and cx_ao without the mx as
>> parent and use them for sc7280.
>>
>> Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
>> ---
>> drivers/soc/qcom/rpmhpd.c | 18 ++++++++++++++++--
>> 1 file changed, 16 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/soc/qcom/rpmhpd.c b/drivers/soc/qcom/rpmhpd.c
>> index c71481d..4599efe 100644
>> --- a/drivers/soc/qcom/rpmhpd.c
>> +++ b/drivers/soc/qcom/rpmhpd.c
>> @@ -120,6 +120,20 @@ static struct rpmhpd cx_ao = {
>> .res_name = "cx.lvl",
>> };
>>
>> +static struct rpmhpd cx_ao_no_parent;
>> +static struct rpmhpd cx_no_parent = {
>
> There are multiple variations of how each of these can be parented, but
> only one way they can be without a parent. So how about we turn this the
> other way around?
>
> I.e. let's name this one "cx" and the existing one "cx_w_mx_parent".
>
>
> This will be particularly useful when you look at mmcx, which on
> 8150/8180 has mx as parent and on 8450 has cx as parent.
>
>
> PS. Unfortunately I had merged 8450 since you wrote this series, I tried
> to just fix it up as I applied your patch, but noticed 8450_cx and
> 8450_mmcx and wanted to get your opinion on this first.
I agree that sounds like a reasonable thing to do, I hadn't looked at 8450
so did not notice it, I will rebase my patches on top and repost.
>
> Regards,
> Bjorn
>
>> + .pd = { .name = "cx", },
>> + .peer = &cx_ao_no_parent,
>> + .res_name = "cx.lvl",
>> +};
>> +
>> +static struct rpmhpd cx_ao_no_parent = {
>> + .pd = { .name = "cx_ao", },
>> + .active_only = true,
>> + .peer = &cx_no_parent,
>> + .res_name = "cx.lvl",
>> +};
>> +
>> static struct rpmhpd mmcx_ao;
>> static struct rpmhpd mmcx = {
>> .pd = { .name = "mmcx", },
>> @@ -273,8 +287,8 @@ static const struct rpmhpd_desc sc7180_desc = {
>>
>> /* SC7280 RPMH powerdomains */
>> static struct rpmhpd *sc7280_rpmhpds[] = {
>> - [SC7280_CX] = &cx,
>> - [SC7280_CX_AO] = &cx_ao,
>> + [SC7280_CX] = &cx_no_parent,
>> + [SC7280_CX_AO] = &cx_ao_no_parent,
>> [SC7280_EBI] = &ebi,
>> [SC7280_GFX] = &gfx,
>> [SC7280_MX] = &mx,
>> --
>> 2.7.4
>>
next prev parent reply other threads:[~2021-12-09 6:59 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-07 10:08 [PATCH v2 0/3] soc: qcom: rpmhpd: Cleanups and mx/cx fixup for sc7280 Rajendra Nayak
2021-12-07 10:08 ` [PATCH v2 1/3] soc: qcom: rpmhpd: Rename rpmhpd struct names Rajendra Nayak
2021-12-07 10:08 ` [PATCH v2 2/3] soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280 Rajendra Nayak
2021-12-08 20:42 ` Bjorn Andersson
2021-12-09 6:59 ` Rajendra Nayak [this message]
2021-12-09 15:37 ` Rajendra Nayak
2021-12-09 16:00 ` Bjorn Andersson
2021-12-07 10:08 ` [PATCH v2 3/3] soc: qcom: rpmhpd: Sort power-domain definitions and lists Rajendra Nayak
2021-12-15 22:27 ` [PATCH v2 0/3] soc: qcom: rpmhpd: Cleanups and mx/cx fixup for sc7280 Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7e9f6cbe-17c9-53ff-95a8-2f2bbdeb1d23@quicinc.com \
--to=quic_rjendra@quicinc.com \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mka@chromium.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox