Re: [PATCH v2 2/2] arm64: dts: qcom: sm8450: Add IMEM and PIL info region

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 21.02.2023 14:36, Mukesh Ojha wrote:
> Add a simple-mfd representing IMEM on SM8450 and define the PIL
> relocation info region, so that post mortem tools will be able
> to locate the loaded remoteprocs.
> 
> Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
> ---
> Changes in v2:
>  -  put ranges after regs and corrected the sram node position.
> 
>  arch/arm64/boot/dts/qcom/sm8450.dtsi | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index 1a744a3..2a4f4ac 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -3814,6 +3814,20 @@
>  			};
>  		};
>  
> +		sram@146aa000 {
Looks like it's not sorted properly? Should be between
TLMM and apss_smmu address-wise.

Konrad
> +			compatible = "qcom,sm8450-imem", "syscon", "simple-mfd";
> +			reg = <0 0x146aa000 0 0x1000>;
> +			ranges = <0 0 0x146aa000 0x1000>;
> +
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +
> +			pil-reloc@94c {
> +				compatible = "qcom,pil-reloc-info";
> +				reg = <0x94c 0xc8>;
> +			};
> +		};
> +
>  		timer@17420000 {
>  			compatible = "arm,armv7-timer-mem";
>  			#address-cells = <1>;