Linux ARM-MSM sub-architecture
 help / color / mirror / Atom feed
From: Baruch Siach <baruch@tkos.co.il>
To: Kathiravan T <kathirav@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Subject: Re: IPQ6018 CP01 boot hangs
Date: Wed, 27 Jan 2021 13:53:42 +0200	[thread overview]
Message-ID: <87o8hay4s9.fsf@tarshish> (raw)
In-Reply-To: <9e6d68a8708c08c1dd20f6f8af4b0b27@codeaurora.org>

Hi Kathiravan T,

On Wed, Jan 27 2021, Kathiravan T wrote:
> On 2021-01-25 14:14, Baruch Siach wrote:
>> Hi linux-arm-msm list,
>> I am trying to boot kernel v5.11-rc4 on the IPQ6018 based CP01 board. 
>> Boot
>> hangs with these last lines shown on the console:
>> [    0.000000] psci: probing for conduit method from DT.
>> [    0.000000] psci: PSCIv1.0 detected in firmware.
>> [    0.000000] psci: Using standard PSCI v0.2 function IDs
>> [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
>> [    0.000000] psci: SMC Calling Convention v1.0
>> [    0.000000] psci: OSI mode supported.
>> I verified that the psci_set_osi_mode() call after the last print never
>> returns.
>> The board is loaded with stock boot image running 32-bit vendor 
>> provided
>> U-Boot version 2016.01. So I'm loading a 32-bit kernel with the
>> ipq6018-cp01-c1.dtb file from arm64.
>
> Can you boot the stock kernel from the vendor and share the below information?
>
> cat /proc/device-tree/tz_version

Stock kernel does not boot for me on that board:

ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "mtd=0", size 53 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 428, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 0, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0
ubi0: available PEBs: 384, total reserved PEBs: 44, PEBs reserved for bad PEB handling: 40
Read 0 bytes from volume kernel to 44000000
Volume kernel not found!
ubi0: detaching mtd2
ubi0: mtd2 is detached

But once I comment out the psci_set_osi_mode() call I can boot mainline
kernel. The tz_version node contains this:

  CRM-TZ.WNS.5.1-00068

Do I need to update? Which TZ version works with mainline kernel?

Thanks,
baruch

-- 
                                                     ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch@tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -

  reply	other threads:[~2021-01-27 12:00 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-25  8:44 IPQ6018 CP01 boot hangs Baruch Siach
2021-01-27  6:56 ` Kathiravan T
2021-01-27 11:53   ` Baruch Siach [this message]
2021-01-27 12:00     ` Kathiravan T

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87o8hay4s9.fsf@tarshish \
    --to=baruch@tkos.co.il \
    --cc=kathirav@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox