[PATCH v2 0/3] drm/display: hdmi: provide common code to get Audio Clock Recovery params

[PATCH v2 0/3] drm/display: hdmi: provide common code to get Audio Clock Recovery params

[Dmitry Baryshkov]

HDMI standards define a recommended set of values to be used for Audio
Clock Regeneration. Nevertheless, each HDMI driver dealing with audio
implements its own way to determine those values. Implement a common
helper and use it for MSM HDMI (tested), VC4 and DW-HDMI (compile-tested
only) drivers.

Note, this helper simply implements the database for these values (HDMI
Section 7.2). The question of selecting supported formats and rates
should be handled by sound/soc/codecs/hdmi-codec.c (pretty much like it
is handled by sound/pci/hda/patch_hdmi.c).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
Changes in v2:
- Added missing EXPORT_SYMBOL(drm_hdmi_acr_get_n_cts) (LKP)
- Extended documentation to explicitly mention L-PCM (Maxime)
- Dropped VC4 and rockchip patchets as I'm not able to test them.
- Link to v1: https://lore.kernel.org/r/20250309-drm-hdmi-acr-v1-0-bb9c242f4d4b@linaro.org

---
Dmitry Baryshkov (3):
      drm/display: hdmi: provide central data authority for ACR params
      drm/msm/hdmi: move msm_hdmi_audio_update() out of msm_hdmi_set_timings()
      drm/msm/hdmi: use new helper for ACR tables

 drivers/gpu/drm/display/drm_hdmi_helper.c | 168 ++++++++++++++++++++++++++++++
 drivers/gpu/drm/msm/hdmi/hdmi_audio.c     | 107 ++-----------------
 drivers/gpu/drm/msm/hdmi/hdmi_bridge.c    |   8 +-
 include/drm/display/drm_hdmi_helper.h     |   6 ++
 4 files changed, 186 insertions(+), 103 deletions(-)
---
base-commit: 2bdde620f7f2bff2ff1cb7dc166859eaa0c78a7c
change-id: 20250308-drm-hdmi-acr-7ad1f0d012df

Best regards,
-- 
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

[PATCH v2 1/3] drm/display: hdmi: provide central data authority for ACR params

[Dmitry Baryshkov]

HDMI standard defines recommended N and CTS values for Audio Clock
Regeneration. Currently each driver implements those, frequently in
somewhat unique way. Provide a generic helper for getting those values
to be used by the HDMI drivers.

The helper is added to drm_hdmi_helper.c rather than drm_hdmi_audio.c
since HDMI drivers can be using this helper function even without
switching to DRM HDMI Audio helpers.

Note: currently this only handles the values per HDMI 1.4b Section 7.2
and HDMI 2.0 Section 9.2.1. Later the table can be expanded to
accommodate for Deep Color TMDS char rates per HDMI 1.4 Appendix D
and/or HDMI 2.0 / 2.1 Appendix C).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 drivers/gpu/drm/display/drm_hdmi_helper.c | 168 ++++++++++++++++++++++++++++++
 include/drm/display/drm_hdmi_helper.h     |   6 ++
 2 files changed, 174 insertions(+)

diff --git a/drivers/gpu/drm/display/drm_hdmi_helper.c b/drivers/gpu/drm/display/drm_hdmi_helper.c
index 74dd4d01dd9bb2c9e69ec1c60b0056bd69417e8a..855cb02b827d68fd630b13fe34f3b4d49645a380 100644
--- a/drivers/gpu/drm/display/drm_hdmi_helper.c
+++ b/drivers/gpu/drm/display/drm_hdmi_helper.c
@@ -256,3 +256,171 @@ drm_hdmi_compute_mode_clock(const struct drm_display_mode *mode,
 	return DIV_ROUND_CLOSEST_ULL(clock * bpc, 8);
 }
 EXPORT_SYMBOL(drm_hdmi_compute_mode_clock);
+
+struct drm_hdmi_acr_n_cts_entry {
+	unsigned int n;
+	unsigned int cts;
+};
+
+struct drm_hdmi_acr_data {
+	unsigned long tmds_clock_khz;
+	struct drm_hdmi_acr_n_cts_entry n_cts_32k,
+					n_cts_44k1,
+					n_cts_48k;
+};
+
+static const struct drm_hdmi_acr_data hdmi_acr_n_cts[] = {
+	{
+		/* "Other" entry */
+		.n_cts_32k =  { .n = 4096, },
+		.n_cts_44k1 = { .n = 6272, },
+		.n_cts_48k =  { .n = 6144, },
+	}, {
+		.tmds_clock_khz = 25175,
+		.n_cts_32k =  { .n = 4576,  .cts = 28125, },
+		.n_cts_44k1 = { .n = 7007,  .cts = 31250, },
+		.n_cts_48k =  { .n = 6864,  .cts = 28125, },
+	}, {
+		.tmds_clock_khz = 25200,
+		.n_cts_32k =  { .n = 4096,  .cts = 25200, },
+		.n_cts_44k1 = { .n = 6272,  .cts = 28000, },
+		.n_cts_48k =  { .n = 6144,  .cts = 25200, },
+	}, {
+		.tmds_clock_khz = 27000,
+		.n_cts_32k =  { .n = 4096,  .cts = 27000, },
+		.n_cts_44k1 = { .n = 6272,  .cts = 30000, },
+		.n_cts_48k =  { .n = 6144,  .cts = 27000, },
+	}, {
+		.tmds_clock_khz = 27027,
+		.n_cts_32k =  { .n = 4096,  .cts = 27027, },
+		.n_cts_44k1 = { .n = 6272,  .cts = 30030, },
+		.n_cts_48k =  { .n = 6144,  .cts = 27027, },
+	}, {
+		.tmds_clock_khz = 54000,
+		.n_cts_32k =  { .n = 4096,  .cts = 54000, },
+		.n_cts_44k1 = { .n = 6272,  .cts = 60000, },
+		.n_cts_48k =  { .n = 6144,  .cts = 54000, },
+	}, {
+		.tmds_clock_khz = 54054,
+		.n_cts_32k =  { .n = 4096,  .cts = 54054, },
+		.n_cts_44k1 = { .n = 6272,  .cts = 60060, },
+		.n_cts_48k =  { .n = 6144,  .cts = 54054, },
+	}, {
+		.tmds_clock_khz = 74176,
+		.n_cts_32k =  { .n = 11648, .cts = 210937, }, /* and 210938 */
+		.n_cts_44k1 = { .n = 17836, .cts = 234375, },
+		.n_cts_48k =  { .n = 11648, .cts = 140625, },
+	}, {
+		.tmds_clock_khz = 74250,
+		.n_cts_32k =  { .n = 4096,  .cts = 74250, },
+		.n_cts_44k1 = { .n = 6272,  .cts = 82500, },
+		.n_cts_48k =  { .n = 6144,  .cts = 74250, },
+	}, {
+		.tmds_clock_khz = 148352,
+		.n_cts_32k =  { .n = 11648, .cts = 421875, },
+		.n_cts_44k1 = { .n = 8918,  .cts = 234375, },
+		.n_cts_48k =  { .n = 5824,  .cts = 140625, },
+	}, {
+		.tmds_clock_khz = 148500,
+		.n_cts_32k =  { .n = 4096,  .cts = 148500, },
+		.n_cts_44k1 = { .n = 6272,  .cts = 165000, },
+		.n_cts_48k =  { .n = 6144,  .cts = 148500, },
+	}, {
+		.tmds_clock_khz = 296703,
+		.n_cts_32k =  { .n = 5824,  .cts = 421875, },
+		.n_cts_44k1 = { .n = 4459,  .cts = 234375, },
+		.n_cts_48k =  { .n = 5824,  .cts = 281250, },
+	}, {
+		.tmds_clock_khz = 297000,
+		.n_cts_32k =  { .n = 3072,  .cts = 222750, },
+		.n_cts_44k1 = { .n = 4704,  .cts = 247500, },
+		.n_cts_48k =  { .n = 5120,  .cts = 247500, },
+	}, {
+		.tmds_clock_khz = 593407,
+		.n_cts_32k =  { .n = 5824,  .cts = 843750, },
+		.n_cts_44k1 = { .n = 8918,  .cts = 937500, },
+		.n_cts_48k =  { .n = 5824,  .cts = 562500, },
+	}, {
+		.tmds_clock_khz = 594000,
+		.n_cts_32k =  { .n = 3072,  .cts = 445500, },
+		.n_cts_44k1 = { .n = 9408,  .cts = 990000, },
+		.n_cts_48k =  { .n = 6144,  .cts = 594000, },
+	},
+};
+
+static int drm_hdmi_acr_find_tmds_entry(unsigned long tmds_clock_khz)
+{
+	int i;
+
+	/* skip the "other" entry */
+	for (i = 1; i < ARRAY_SIZE(hdmi_acr_n_cts); i++) {
+		if (hdmi_acr_n_cts[i].tmds_clock_khz == tmds_clock_khz)
+			return i;
+	}
+
+	return 0;
+}
+
+/**
+ * drm_hdmi_acr_get_n_cts() - get N and CTS values for Audio Clock Regeneration
+ *
+ * @tmds_char_rate: TMDS clock (char rate) as used by the HDMI connector
+ * @sample_rate: audio sample rate
+ * @out_n: a pointer to write the N value
+ * @out_cts: a pointer to write the CTS value
+ *
+ * Get the N and CTS values (either by calculating them or by returning data
+ * from the tables. This follows the HDMI 1.4b Section 7.2 "Audio Sample Clock
+ * Capture and Regeneration".
+ *
+ * Note, @sample_rate corresponds to the Fs value, see sections 7.2.4 - 7.2.6
+ * on how to select Fs for non-L-PCM formats.
+ */
+void
+drm_hdmi_acr_get_n_cts(unsigned long long tmds_char_rate,
+		       unsigned int sample_rate,
+		       unsigned int *out_n,
+		       unsigned int *out_cts)
+{
+	/* be a bit more tolerant, especially for the 1.001 entries */
+	unsigned long tmds_clock_khz = DIV_ROUND_CLOSEST_ULL(tmds_char_rate, 1000);
+	const struct drm_hdmi_acr_n_cts_entry *entry;
+	unsigned int n, cts, mult;
+	int tmds_idx;
+
+	tmds_idx = drm_hdmi_acr_find_tmds_entry(tmds_clock_khz);
+
+	/*
+	 * Don't change the order, 192 kHz is divisible by 48k and 32k, but it
+	 * should use 48k entry.
+	 */
+	if (sample_rate % 48000 == 0) {
+		entry = &hdmi_acr_n_cts[tmds_idx].n_cts_48k;
+		mult = sample_rate / 48000;
+	} else if (sample_rate % 44100 == 0) {
+		entry = &hdmi_acr_n_cts[tmds_idx].n_cts_44k1;
+		mult = sample_rate / 44100;
+	} else if (sample_rate % 32000 == 0) {
+		entry = &hdmi_acr_n_cts[tmds_idx].n_cts_32k;
+		mult = sample_rate / 32000;
+	} else {
+		entry = NULL;
+	}
+
+	if (entry) {
+		n = entry->n * mult;
+		cts = entry->cts;
+	} else {
+		/* Recommended optimal value, HDMI 1.4b, Section 7.2.1 */
+		n = 128 * sample_rate / 1000;
+		cts = 0;
+	}
+
+	if (!cts)
+		cts = DIV_ROUND_CLOSEST_ULL(tmds_char_rate * n,
+					    128 * sample_rate);
+
+	*out_n = n;
+	*out_cts = cts;
+}
+EXPORT_SYMBOL(drm_hdmi_acr_get_n_cts);
diff --git a/include/drm/display/drm_hdmi_helper.h b/include/drm/display/drm_hdmi_helper.h
index 57e3b18c15ec79636d89267aba0e88f434c5d4db..09145c9ee9fc0cd839242f2373b305940e06e157 100644
--- a/include/drm/display/drm_hdmi_helper.h
+++ b/include/drm/display/drm_hdmi_helper.h
@@ -28,4 +28,10 @@ unsigned long long
 drm_hdmi_compute_mode_clock(const struct drm_display_mode *mode,
 			    unsigned int bpc, enum hdmi_colorspace fmt);
 
+void
+drm_hdmi_acr_get_n_cts(unsigned long long tmds_char_rate,
+		       unsigned int sample_rate,
+		       unsigned int *out_n,
+		       unsigned int *out_cts);
+
 #endif

-- 
2.39.5

Re: [PATCH v2 1/3] drm/display: hdmi: provide central data authority for ACR params

[Maxime Ripard]

On Tue, 8 Apr 2025 16:54:25 +0300, Dmitry Baryshkov wrote:
> HDMI standard defines recommended N and CTS values for Audio Clock
> Regeneration. Currently each driver implements those, frequently in
> somewhat unique way. Provide a generic helper for getting those values
> to be used by the HDMI drivers.
> 
> 
> [ ... ]

Reviewed-by: Maxime Ripard <mripard@kernel.org>

Thanks!
Maxime

[PATCH v2 2/3] drm/msm/hdmi: move msm_hdmi_audio_update() out of msm_hdmi_set_timings()

[Dmitry Baryshkov]

There is a duplication between msm_hdmi_audio_update() calls in
msm_hdmi_set_timings() and msm_hdmi_bridge_atomic_pre_enable(). Merge
those two calls to be performed unconditionally at
msm_hdmi_bridge_atomic_pre_enable().

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 drivers/gpu/drm/msm/hdmi/hdmi_bridge.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c b/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
index 1456354c8af4bc7f655e8a47e958e9e0b99b7d29..d1218f2a6e9fd70c0e4e30a620daa69e84e12e9f 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
@@ -324,10 +324,11 @@ static void msm_hdmi_bridge_atomic_pre_enable(struct drm_bridge *bridge,
 		msm_hdmi_phy_resource_enable(phy);
 		msm_hdmi_power_on(bridge);
 		hdmi->power_on = true;
-		if (connector->display_info.is_hdmi)
-			msm_hdmi_audio_update(hdmi);
 	}
 
+	if (connector->display_info.is_hdmi)
+		msm_hdmi_audio_update(hdmi);
+
 	drm_atomic_helper_connector_hdmi_update_infoframes(connector, state);
 
 	msm_hdmi_phy_powerup(phy, hdmi->pixclock);
@@ -411,9 +412,6 @@ static void msm_hdmi_set_timings(struct hdmi *hdmi,
 		frame_ctrl |= HDMI_FRAME_CTRL_INTERLACED_EN;
 	DBG("frame_ctrl=%08x", frame_ctrl);
 	hdmi_write(hdmi, REG_HDMI_FRAME_CTRL, frame_ctrl);
-
-	if (hdmi->connector->display_info.is_hdmi)
-		msm_hdmi_audio_update(hdmi);
 }
 
 static const struct drm_edid *msm_hdmi_bridge_edid_read(struct drm_bridge *bridge,

-- 
2.39.5

Re: [PATCH v2 2/3] drm/msm/hdmi: move msm_hdmi_audio_update() out of msm_hdmi_set_timings()

[Abhinav Kumar]

On 4/8/2025 6:54 AM, Dmitry Baryshkov wrote:
> There is a duplication between msm_hdmi_audio_update() calls in
> msm_hdmi_set_timings() and msm_hdmi_bridge_atomic_pre_enable(). Merge
> those two calls to be performed unconditionally at
> msm_hdmi_bridge_atomic_pre_enable().
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> ---
>   drivers/gpu/drm/msm/hdmi/hdmi_bridge.c | 8 +++-----
>   1 file changed, 3 insertions(+), 5 deletions(-)
> 

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>

[PATCH v2 3/3] drm/msm/hdmi: use new helper for ACR tables

[Dmitry Baryshkov]

Use new drm_hdmi_acr_get_n_cts() helper instead of hand-coding the
tables. Instead of storing the rate 'index', store the audio sample rate
in hdmi->audio.rate, removing the need for even more defines.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 drivers/gpu/drm/msm/hdmi/hdmi_audio.c | 107 +++-------------------------------
 1 file changed, 9 insertions(+), 98 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_audio.c b/drivers/gpu/drm/msm/hdmi/hdmi_audio.c
index 8bb975e82c17c1d77217128e9ddbd6a0575bb33d..b9ec14ef2c20ebfa03c30994eb2395f21b9502bb 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_audio.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_audio.c
@@ -4,6 +4,7 @@
  * Author: Rob Clark <robdclark@gmail.com>
  */
 
+#include <drm/display/drm_hdmi_helper.h>
 #include <drm/display/drm_hdmi_state_helper.h>
 
 #include <linux/hdmi.h>
@@ -12,71 +13,9 @@
 
 #include "hdmi.h"
 
-/* Supported HDMI Audio sample rates */
-#define MSM_HDMI_SAMPLE_RATE_32KHZ		0
-#define MSM_HDMI_SAMPLE_RATE_44_1KHZ		1
-#define MSM_HDMI_SAMPLE_RATE_48KHZ		2
-#define MSM_HDMI_SAMPLE_RATE_88_2KHZ		3
-#define MSM_HDMI_SAMPLE_RATE_96KHZ		4
-#define MSM_HDMI_SAMPLE_RATE_176_4KHZ		5
-#define MSM_HDMI_SAMPLE_RATE_192KHZ		6
-#define MSM_HDMI_SAMPLE_RATE_MAX		7
-
-
-struct hdmi_msm_audio_acr {
-	uint32_t n;	/* N parameter for clock regeneration */
-	uint32_t cts;	/* CTS parameter for clock regeneration */
-};
-
-struct hdmi_msm_audio_arcs {
-	unsigned long int pixclock;
-	struct hdmi_msm_audio_acr lut[MSM_HDMI_SAMPLE_RATE_MAX];
-};
-
-#define HDMI_MSM_AUDIO_ARCS(pclk, ...) { (1000 * (pclk)), __VA_ARGS__ }
-
-/* Audio constants lookup table for hdmi_msm_audio_acr_setup */
-/* Valid Pixel-Clock rates: 25.2MHz, 27MHz, 27.03MHz, 74.25MHz, 148.5MHz */
-static const struct hdmi_msm_audio_arcs acr_lut[] = {
-	/*  25.200MHz  */
-	HDMI_MSM_AUDIO_ARCS(25200, {
-		{4096, 25200}, {6272, 28000}, {6144, 25200}, {12544, 28000},
-		{12288, 25200}, {25088, 28000}, {24576, 25200} }),
-	/*  27.000MHz  */
-	HDMI_MSM_AUDIO_ARCS(27000, {
-		{4096, 27000}, {6272, 30000}, {6144, 27000}, {12544, 30000},
-		{12288, 27000}, {25088, 30000}, {24576, 27000} }),
-	/*  27.027MHz */
-	HDMI_MSM_AUDIO_ARCS(27030, {
-		{4096, 27027}, {6272, 30030}, {6144, 27027}, {12544, 30030},
-		{12288, 27027}, {25088, 30030}, {24576, 27027} }),
-	/*  74.250MHz */
-	HDMI_MSM_AUDIO_ARCS(74250, {
-		{4096, 74250}, {6272, 82500}, {6144, 74250}, {12544, 82500},
-		{12288, 74250}, {25088, 82500}, {24576, 74250} }),
-	/* 148.500MHz */
-	HDMI_MSM_AUDIO_ARCS(148500, {
-		{4096, 148500}, {6272, 165000}, {6144, 148500}, {12544, 165000},
-		{12288, 148500}, {25088, 165000}, {24576, 148500} }),
-};
-
-static const struct hdmi_msm_audio_arcs *get_arcs(unsigned long int pixclock)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(acr_lut); i++) {
-		const struct hdmi_msm_audio_arcs *arcs = &acr_lut[i];
-		if (arcs->pixclock == pixclock)
-			return arcs;
-	}
-
-	return NULL;
-}
-
 int msm_hdmi_audio_update(struct hdmi *hdmi)
 {
 	struct hdmi_audio *audio = &hdmi->audio;
-	const struct hdmi_msm_audio_arcs *arcs = NULL;
 	bool enabled = audio->enabled;
 	uint32_t acr_pkt_ctrl, vbi_pkt_ctrl, aud_pkt_ctrl;
 	uint32_t audio_config;
@@ -94,15 +33,6 @@ int msm_hdmi_audio_update(struct hdmi *hdmi)
 		enabled = false;
 	}
 
-	if (enabled) {
-		arcs = get_arcs(hdmi->pixclock);
-		if (!arcs) {
-			DBG("disabling audio: unsupported pixclock: %lu",
-					hdmi->pixclock);
-			enabled = false;
-		}
-	}
-
 	/* Read first before writing */
 	acr_pkt_ctrl = hdmi_read(hdmi, REG_HDMI_ACR_PKT_CTRL);
 	vbi_pkt_ctrl = hdmi_read(hdmi, REG_HDMI_VBI_PKT_CTRL);
@@ -116,15 +46,12 @@ int msm_hdmi_audio_update(struct hdmi *hdmi)
 		uint32_t n, cts, multiplier;
 		enum hdmi_acr_cts select;
 
-		n   = arcs->lut[audio->rate].n;
-		cts = arcs->lut[audio->rate].cts;
+		drm_hdmi_acr_get_n_cts(hdmi->pixclock, audio->rate, &n, &cts);
 
-		if ((MSM_HDMI_SAMPLE_RATE_192KHZ == audio->rate) ||
-				(MSM_HDMI_SAMPLE_RATE_176_4KHZ == audio->rate)) {
+		if (audio->rate == 192000 || audio->rate == 176400) {
 			multiplier = 4;
 			n >>= 2; /* divide N by 4 and use multiplier */
-		} else if ((MSM_HDMI_SAMPLE_RATE_96KHZ == audio->rate) ||
-				(MSM_HDMI_SAMPLE_RATE_88_2KHZ == audio->rate)) {
+		} else if (audio->rate == 96000 || audio->rate == 88200) {
 			multiplier = 2;
 			n >>= 1; /* divide N by 2 and use multiplier */
 		} else {
@@ -137,13 +64,11 @@ int msm_hdmi_audio_update(struct hdmi *hdmi)
 		acr_pkt_ctrl |= HDMI_ACR_PKT_CTRL_AUDIO_PRIORITY;
 		acr_pkt_ctrl |= HDMI_ACR_PKT_CTRL_N_MULTIPLIER(multiplier);
 
-		if ((MSM_HDMI_SAMPLE_RATE_48KHZ == audio->rate) ||
-				(MSM_HDMI_SAMPLE_RATE_96KHZ == audio->rate) ||
-				(MSM_HDMI_SAMPLE_RATE_192KHZ == audio->rate))
+		if (audio->rate == 48000 || audio->rate == 96000 ||
+		    audio->rate == 192000)
 			select = ACR_48;
-		else if ((MSM_HDMI_SAMPLE_RATE_44_1KHZ == audio->rate) ||
-				(MSM_HDMI_SAMPLE_RATE_88_2KHZ == audio->rate) ||
-				(MSM_HDMI_SAMPLE_RATE_176_4KHZ == audio->rate))
+		else if (audio->rate == 44100 || audio->rate == 88200 ||
+			 audio->rate == 176400)
 			select = ACR_44;
 		else /* default to 32k */
 			select = ACR_32;
@@ -204,7 +129,6 @@ int msm_hdmi_bridge_audio_prepare(struct drm_connector *connector,
 {
 	struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
 	struct hdmi *hdmi = hdmi_bridge->hdmi;
-	unsigned int rate;
 	int ret;
 
 	drm_dbg_driver(bridge->dev, "%u Hz, %d bit, %d channels\n",
@@ -214,25 +138,12 @@ int msm_hdmi_bridge_audio_prepare(struct drm_connector *connector,
 
 	switch (params->sample_rate) {
 	case 32000:
-		rate = MSM_HDMI_SAMPLE_RATE_32KHZ;
-		break;
 	case 44100:
-		rate = MSM_HDMI_SAMPLE_RATE_44_1KHZ;
-		break;
 	case 48000:
-		rate = MSM_HDMI_SAMPLE_RATE_48KHZ;
-		break;
 	case 88200:
-		rate = MSM_HDMI_SAMPLE_RATE_88_2KHZ;
-		break;
 	case 96000:
-		rate = MSM_HDMI_SAMPLE_RATE_96KHZ;
-		break;
 	case 176400:
-		rate = MSM_HDMI_SAMPLE_RATE_176_4KHZ;
-		break;
 	case 192000:
-		rate = MSM_HDMI_SAMPLE_RATE_192KHZ;
 		break;
 	default:
 		drm_err(bridge->dev, "rate[%d] not supported!\n",
@@ -245,7 +156,7 @@ int msm_hdmi_bridge_audio_prepare(struct drm_connector *connector,
 	if (ret)
 		return ret;
 
-	hdmi->audio.rate = rate;
+	hdmi->audio.rate = params->sample_rate;
 	hdmi->audio.channels = params->cea.channels;
 	hdmi->audio.enabled = true;
 

-- 
2.39.5

Re: [PATCH v2 3/3] drm/msm/hdmi: use new helper for ACR tables

[Abhinav Kumar]

On 4/8/2025 6:54 AM, Dmitry Baryshkov wrote:
> Use new drm_hdmi_acr_get_n_cts() helper instead of hand-coding the
> tables. Instead of storing the rate 'index', store the audio sample rate
> in hdmi->audio.rate, removing the need for even more defines.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> ---
>   drivers/gpu/drm/msm/hdmi/hdmi_audio.c | 107 +++-------------------------------
>   1 file changed, 9 insertions(+), 98 deletions(-)
> 

LGTM,

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>

Re: (subset) [PATCH v2 0/3] drm/display: hdmi: provide common code to get Audio Clock Recovery params

[Dmitry Baryshkov]

On Tue, 08 Apr 2025 16:54:24 +0300, Dmitry Baryshkov wrote:
> HDMI standards define a recommended set of values to be used for Audio
> Clock Regeneration. Nevertheless, each HDMI driver dealing with audio
> implements its own way to determine those values. Implement a common
> helper and use it for MSM HDMI (tested), VC4 and DW-HDMI (compile-tested
> only) drivers.
> 
> Note, this helper simply implements the database for these values (HDMI
> Section 7.2). The question of selecting supported formats and rates
> should be handled by sound/soc/codecs/hdmi-codec.c (pretty much like it
> is handled by sound/pci/hda/patch_hdmi.c).
> 
> [...]

Applied to drm-misc-next, thanks!

[1/3] drm/display: hdmi: provide central data authority for ACR params
      commit: fec450ca15af63649e219060f37a8ec673333726

Best regards,
-- 
With best wishes
Dmitry

Re: [PATCH v2 0/3] drm/display: hdmi: provide common code to get Audio Clock Recovery params

[Dmitry Baryshkov]

On Tue, 08 Apr 2025 16:54:24 +0300, Dmitry Baryshkov wrote:
> HDMI standards define a recommended set of values to be used for Audio
> Clock Regeneration. Nevertheless, each HDMI driver dealing with audio
> implements its own way to determine those values. Implement a common
> helper and use it for MSM HDMI (tested), VC4 and DW-HDMI (compile-tested
> only) drivers.
> 
> Note, this helper simply implements the database for these values (HDMI
> Section 7.2). The question of selecting supported formats and rates
> should be handled by sound/soc/codecs/hdmi-codec.c (pretty much like it
> is handled by sound/pci/hda/patch_hdmi.c).
> 
> [...]

Applied, thanks!

[2/3] drm/msm/hdmi: move msm_hdmi_audio_update() out of msm_hdmi_set_timings()
      https://gitlab.freedesktop.org/lumag/msm/-/commit/1735917ac44a
[3/3] drm/msm/hdmi: use new helper for ACR tables
      https://gitlab.freedesktop.org/lumag/msm/-/commit/88321e3529f1

Best regards,
-- 
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

Re: [PATCH v2 0/3] drm/display: hdmi: provide common code to get Audio Clock Recovery params

[Dmitry Baryshkov]

On Tue, 08 Apr 2025 16:54:24 +0300, Dmitry Baryshkov wrote:
> HDMI standards define a recommended set of values to be used for Audio
> Clock Regeneration. Nevertheless, each HDMI driver dealing with audio
> implements its own way to determine those values. Implement a common
> helper and use it for MSM HDMI (tested), VC4 and DW-HDMI (compile-tested
> only) drivers.
> 
> Note, this helper simply implements the database for these values (HDMI
> Section 7.2). The question of selecting supported formats and rates
> should be handled by sound/soc/codecs/hdmi-codec.c (pretty much like it
> is handled by sound/pci/hda/patch_hdmi.c).
> 
> [...]

Applied, thanks!

[2/3] drm/msm/hdmi: move msm_hdmi_audio_update() out of msm_hdmi_set_timings()
      https://gitlab.freedesktop.org/lumag/msm/-/commit/1735917ac44a
[3/3] drm/msm/hdmi: use new helper for ACR tables
      https://gitlab.freedesktop.org/lumag/msm/-/commit/88321e3529f1

Best regards,
-- 
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>