Re: [PATCH v2 7/8] arm64: dts: qcom: sort out Iris power domains

[Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>]

On 2/1/2026 4:19 PM, Dmitry Baryshkov wrote:
> On SM8250 Iris core requires two power rails to function, MX (for PLLs)
> and MMCX (for everything else). The commit fa245b3f06cd ("arm64: dts:
> qcom: sm8250: Add venus DT node") added only MX power rail, but,
> strangely enough, using MMCX voltage levels.
> 
> Add MMCX domain together with the (more correct) MX OPP levels.
> 
> Fixes: fa245b3f06cd ("arm64: dts: qcom: sm8250: Add venus DT node")
> Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/sm8250.dtsi | 20 ++++++++++++++------
>  1 file changed, 14 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index 980d6e894b9d..531470506809 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -4321,8 +4321,12 @@ venus: video-codec@aa00000 {
>  			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
>  			power-domains = <&videocc MVS0C_GDSC>,
>  					<&videocc MVS0_GDSC>,
> -					<&rpmhpd RPMHPD_MX>;
> -			power-domain-names = "venus", "vcodec0", "mx";
> +					<&rpmhpd RPMHPD_MX>,
> +					<&rpmhpd RPMHPD_MMCX>;
> +			power-domain-names = "venus",
> +					     "vcodec0",
> +					     "mx",
> +					     "mmcx";
>  			operating-points-v2 = <&venus_opp_table>;
>  
>  			clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
> @@ -4348,22 +4352,26 @@ venus_opp_table: opp-table {
>  
>  				opp-720000000 {
>  					opp-hz = /bits/ 64 <720000000>;
> -					required-opps = <&rpmhpd_opp_low_svs>;
> +					required-opps = <&rpmhpd_opp_low_svs>,

should be rpmhpd_opp_svs for MX for PLL to get voted to 720000000.

> +							<&rpmhpd_opp_low_svs>;
>  				};
>  
>  				opp-1014000000 {
>  					opp-hz = /bits/ 64 <1014000000>;
> -					required-opps = <&rpmhpd_opp_svs>;
> +					required-opps = <&rpmhpd_opp_low_svs>,

should be rpmhpd_opp_svs for MX

> +							<&rpmhpd_opp_svs>;
>  				};
>  
>  				opp-1098000000 {
>  					opp-hz = /bits/ 64 <1098000000>;
> -					required-opps = <&rpmhpd_opp_svs_l1>;
> +					required-opps = <&rpmhpd_opp_svs>,

should be rpmhpd_opp_svs_l1 for MX, SVS can only go upto 1066.

> +							<&rpmhpd_opp_svs_l1>;
>  				};
>  
>  				opp-1332000000 {
>  					opp-hz = /bits/ 64 <1332000000>;
> -					required-opps = <&rpmhpd_opp_nom>;
> +					required-opps = <&rpmhpd_opp_svs>,

should be rpmhpd_opp_svs_l1 for MX, which can go upto 1500.

Thanks,
Dikshita
> +							<&rpmhpd_opp_nom>;
>  				};
>  			};
>  		};
>