Re: [PATCH v6] media: qcom: iris: use disable_irq() during power-off

[Bryan O'Donoghue <bryan.odonoghue@linaro.org>]

On 30/06/2026 16:26, Hungyu Lin wrote:
> The IRQ is registered as a threaded IRQ.
> 
> Using disable_irq_nosync() in iris_vpu_power_off() does not wait
> for an already queued threaded IRQ handler to complete before
> returning.
> 
> As a result, a threaded IRQ handler may still run after the VPU has
> been powered down and access hardware registers after power-off.
> 
> Replace disable_irq_nosync() with disable_irq() so the power-off path
> waits for any in-flight threaded IRQ handler to complete before
> returning.
> 
> Fixes: bb8a95aa038e ("media: iris: implement power management")
> Cc: stable@vger.kernel.org
> Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
> ---
>   drivers/media/platform/qcom/iris/iris_vpu_common.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/media/platform/qcom/iris/iris_vpu_common.c b/drivers/media/platform/qcom/iris/iris_vpu_common.c
> index 69e6126dc4d9..538659284c7b 100644
> --- a/drivers/media/platform/qcom/iris/iris_vpu_common.c
> +++ b/drivers/media/platform/qcom/iris/iris_vpu_common.c
> @@ -236,7 +236,7 @@ void iris_vpu_power_off(struct iris_core *core)
>   	iris_unset_icc_bw(core);
> 
>   	if (!iris_vpu_watchdog(core, core->intr_status))
> -		disable_irq_nosync(core->irq);
> +		disable_irq(core->irq);
>   }
> 
>   int iris_vpu_power_on_controller(struct iris_core *core)
> --
> 2.34.1
> 
> 

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

---
bod