From mboxrd@z Thu Jan 1 00:00:00 1970 From: Abhishek Sahu Subject: Re: [PATCH 05/15] ARM: dts: ipq4019: Add ipq4019-ap-dk01-c2 board file Date: Sat, 03 Feb 2018 16:25:53 +0530 Message-ID: <9afb20e560a7ebbcefcb801e7447a983@codeaurora.org> References: <1517202689-14212-1-git-send-email-sricharan@codeaurora.org> <1517202689-14212-6-git-send-email-sricharan@codeaurora.org> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1517202689-14212-6-git-send-email-sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Sricharan R Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org, andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, david.brown-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, catalin.marinas-5wv7dgnIgG8@public.gmane.org, will.deacon-5wv7dgnIgG8@public.gmane.org, sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-msm-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-arm-msm@vger.kernel.org On 2018-01-29 10:41, Sricharan R wrote: > The board has a spi-nand interface on spi0 bus chipselect1. > > Signed-off-by: Sricharan R > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c2.dts | 25 > +++++++++++++++++++++++++ > 2 files changed, 26 insertions(+) > create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c2.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index d0381e9..21ed56d 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -724,6 +724,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ > qcom-apq8084-ifc6540.dtb \ > qcom-apq8084-mtp.dtb \ > qcom-ipq4019-ap.dk01.1-c1.dtb \ > + qcom-ipq4019-ap.dk01.1-c2.dtb \ > qcom-ipq8064-ap148.dtb \ > qcom-msm8660-surf.dtb \ > qcom-msm8960-cdp.dtb \ > diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c2.dts > b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c2.dts > new file mode 100644 > index 0000000..e3442da > --- /dev/null > +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c2.dts > @@ -0,0 +1,25 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// Copyright (c) 2017, The Linux Foundation. All rights reserved. > + > +#include "qcom-ipq4019-ap.dk01.1.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C2"; s/IPQ40xx/IPQ4019 > + > + soc { > + spi_0: spi@78b5000 { /* BLSP1 QUP1 */ > + status = "ok"; > + cs-gpios = <&tlmm 54 0>, <&tlmm 59 0>; the base dk01 file has pinmux for 54 only. for 59 pin, we need to add pinmux entry also. Thanks, Abhishek > + num-cs = <2>; > + > + mt29f@1 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "spinand,mt29f"; > + reg = <1>; > + spi-max-frequency = <24000000>; > + }; > + > + }; > + }; > +}; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html