messages from 2014-06-30 17:56:14 to 2014-07-10 02:40:06 UTC [more...]
RFC: Leave sysfs nodes alone during hotplug
2014-07-10 2:40 UTC (10+ messages)
[PATCH] cpufreq: Don't destroy/realloc policy/sysfs on hotplug/suspend
2014-07-10 2:37 UTC
[RFC/PATCH 0/7] Add MSM SMMUv1 support
2014-07-10 0:40 UTC (21+ messages)
` [RFC/PATCH 2/7] iommu-api: Add map_range/unmap_range functions
` [RFC/PATCH 3/7] iopoll: Introduce memory-mapped IO polling macros
` [RFC/PATCH 4/7] iommu: msm: Add MSM IOMMUv1 driver
` [RFC/PATCH 7/7] iommu-api: Add domain attribute to enable coherent HTW
a case for a common efuse API?
2014-07-09 23:32 UTC (9+ messages)
[PATCH v3] pinctrl: msm: Add msm8960 definitions
2014-07-09 22:12 UTC (3+ messages)
[PATCH 0/3] Qualcomm pm8xxx gpio driver
2014-07-09 21:18 UTC (12+ messages)
` [PATCH 1/3] mfd: pm8921: Expose pm8xxx_read_irq_status
` [PATCH 2/3] pinctrl: Device tree bindings for Qualcomm pm8xxx gpio block
` [PATCH 3/3] pinctrl: Introduce pinctrl driver for Qualcomm pm8xxx
[PATCH v2] tty: serial: msm_serial.c: Cleaning up uninitialized variables
2014-07-09 21:01 UTC (3+ messages)
[RFC PATCH v2 0/5] Support for Qualcomm QPNP PMIC's
2014-07-09 18:07 UTC (11+ messages)
` [RFC PATCH v2 1/5] mfd: qpnp: add support for Qualcomm QPNP PMICs
` [RFC PATCH v2 2/5] dt: qcom: msm8974: add qpnp-spmi device nodes
` [RFC PATCH v2 3/5] rtc: add qpnp rtc driver
` [RFC PATCH v2 4/5] dt: msm8974: add qpnp rtc device node
` [RFC PATCH v2 5/5] dt: rtc: add binding document for qpnp rtc
[PATCH 00/14] cpufreq: cpu0: Extend support beyond CPU0, V2
2014-07-09 17:41 UTC (53+ messages)
` [PATCH 01/14] of: Create of_property_match()
` [PATCH 02/14] clk: Create of_clk_shared_by_cpus()
` [PATCH 03/14] cpufreq: Add support for per-policy driver data
` [PATCH 04/14] cpufreq: cpu0: Add Module Author
` [PATCH 05/14] cpufreq: cpu0: don't validate clock on clk_put()
` [PATCH 06/14] cpufreq: cpu0: defer probe if clock isn't registered yet
` [PATCH 07/14] cpufreq: cpu0: OPPs can be populated at runtime
` [PATCH V2 Resend "
` [PATCH 08/14] cpufreq: cpu0: use dev_{err|warn|dbg} instead of pr_{err|warn|debug}
` [PATCH 09/14] cpufreq: cpu0: Move per-cluster initialization code to ->init()
` [PATCH 10/14] cpufreq: cpu0: try regulators with name "cpu-supply"
` [PATCH 11/14] cpufreq: cpu0: Make allocate_resources() work for any CPU
` [PATCH 12/14] cpufreq: cpu0: Extend support beyond CPU0
` [PATCH V2 Resend "
` [PATCH 13/14] cpufreq: cpu0: rename driver and internals to 'cpufreq_generic'
` [PATCH 14/14] cpufreq: generic: set platform_{driver|device} '.name' to 'cpufreq-generic'
[PATCH 0/4] New Qualcomm PMIC pin controller drivers
2014-07-09 14:02 UTC (11+ messages)
` [PATCH 1/4] pinctrl: qpnp: Qualcomm PMIC pin controller driver
` [PATCH 2/4] pinctrl: qcom: Add documentation for pinctrl-qpnp binding
` [PATCH 3/4] pinctrl: qcom: Add PM8941 and PM8941 pinctrl drivers
` [PATCH 4/4] ARM: dts: qcom: Add PM8941 and PM8841 pinctrl nodes
[PATCH v2] clk: qcom: Fix MN frequency tables, parent map, and jpegd
2014-07-09 13:05 UTC (2+ messages)
[PATCH] phy: qcom: Add driver for QCOM APQ8064 SATA PHY
2014-07-09 11:04 UTC (6+ messages)
` [PATCH v2 0/2] Add Qcom AP8064 SATA PHY support
` [PATCH v2 1/2] phy: qcom: Add driver for QCOM APQ8064 SATA PHY
` [PATCH v2 2/2] phy: qcom: Update APQ8064 PHY device tree bindings
[PATCH v2] pinctrl: msm: Add msm8960 definitions
2014-07-09 3:50 UTC (3+ messages)
[PATCH] clk: qcom: Fix MN frequency tables, parent map, and jpegd
2014-07-09 1:19 UTC
[PATCH 0/3] minor MSM cleanup
2014-07-08 16:09 UTC (5+ messages)
` [PATCH 1/3] ARM: msm: delete dangling mahimahi board file
` [PATCH 2/3] ARM: msm: remove reference to MSM_SERIAL_DEBUGGER
` [PATCH 3/3] ARM: msm: delete dangling debug UART code
[RFC] drm/msm: DT support for 8960/8064
2014-07-08 16:00 UTC (14+ messages)
` [RFCv2] "
[PATCH 0/3] Support for Qualcomm QPNP PMIC's
2014-07-08 15:54 UTC (4+ messages)
` [PATCH 1/3] mfd: qpnp-spmi: add support for Qualcomm QPNP PMICs
` [PATCH 2/3] mfd: qpnp-spmi: document DT bindings "
` [PATCH 3/3] dt: qcom: msm8974: add qpnp-spmi device nodes
[PATCH 0/2] crypto: qce: fix few sparse warnings
2014-07-08 13:21 UTC (4+ messages)
` [PATCH 1/2] crypto: qce: fix "
` [PATCH 2/2] crypto: qce: add dependancy to Kconfig
[PATCH 0/3] ufs driver fixes and updates
2014-07-08 10:35 UTC (7+ messages)
` [PATCH 1/3] scsi: ufs: read door bell register after clearing interrupt aggregation
` [PATCH 2/3] scsi: ufs: Fix sending unsupported SCSI command
` [PATCH 3/3] scsi: ufs: retry if the link-startup fails
[PATCH] drm/msm/mdp5: add support for MDP5 v1.3
2014-07-07 14:34 UTC (2+ messages)
[PATCH] pinctrl: qcom: Add BUS_HOLD pin bias
2014-07-07 14:21 UTC (2+ messages)
[PATCH v3 0/3] Qualcomm Resource Power Manager driver
2014-07-04 6:16 UTC (5+ messages)
` [PATCH v3 1/3] soc: devicetree: bindings: Add Qualcomm RPM DT binding
` [PATCH v3 2/3] soc: qcom-rpm: Driver for the Qualcomm RPM
[PATCH v4 0/3] Add Qualcomm crypto driver
2014-07-03 13:42 UTC (2+ messages)
[PATCH] clk: qcom: HDMI source sel is 3 not 2
2014-07-02 23:37 UTC (2+ messages)
[Patch v7 0/3] DWC3 USB support for Qualcomm platform
2014-07-02 15:54 UTC (8+ messages)
` [Patch v7 3/3] usb: dwc3: qcom: Add device tree binding
[PATCH] spi: qup: Add DMA capabilities
2014-07-02 14:26 UTC (2+ messages)
[PATCH v4] clk: qcom: Add support for IPQ8064's global clock controller (GCC)
2014-07-02 4:20 UTC (3+ messages)
[PATCH] clk: Add tracepoints for hardware operations
2014-07-02 3:44 UTC (5+ messages)
[PATCH 0/2] cpufreq: cpu0: Extend support beyond CPU0
2014-07-02 3:32 UTC (12+ messages)
` [PATCH 2/2] "
[PATCH] tty: serial: msm: Support big-endian CPUs
2014-06-30 21:54 UTC
[PATCH] ARM: debug: msm: Support big-endian CPUs
2014-06-30 21:49 UTC
[PATCH v1 1/3] usb: Kconfig: make EHCI_MSM selectable for QCOM SOCs
2014-06-30 18:28 UTC (2+ messages)
[PATCH v1 0/3] ehci_msm fixes for APQ8064 USB host support
2014-06-30 18:06 UTC (4+ messages)
` [PATCH v1 3/3] usb: phy: msm: Do not do runtime pm if the phy is not idle
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox