messages from 2017-12-29 00:00:47 to 2018-01-05 17:10:04 UTC [more...]
[PATCH 0/5] clk: read-only dividers and rate propagation fixup
2018-01-05 17:09 UTC (4+ messages)
` [PATCH 1/5] clk: divider: read-only divider can propagate rate change
` [PATCH 4/5] clk: lpc32xx: use divider_ro_round_rate helper
` [PATCH 5/5] clk: qcom: "
[PATCH] tty: fix data race in n_tty_receive_buf_common
2018-01-05 14:15 UTC (6+ messages)
[GIT PULL] Qualcomm Driver updates for 4.16 - Redo
2018-01-05 11:23 UTC (2+ messages)
[PATCH v4 00/16] Support for Qualcomm QUSBv2 and QMPv3 USB PHYs
2018-01-05 11:01 UTC (18+ messages)
` [PATCH v4 01/16] phy: qcom-qmp: Fix phy pipe clock gating
` [PATCH v4 02/16] phy: qcom-qmp: Adapt to clk_bulk_* APIs
` [PATCH v4 03/16] phy: qcom-qmp: Power-on PHY before initialization
` [PATCH v4 04/16] phy: qcom-qusb2: "
` [PATCH v4 05/16] phy: qcom-qmp: Fix PHY block reset sequence
` [PATCH v4 06/16] phy: qcom-qmp: Move SERDES/PCS START after PHY reset
` [PATCH v4 07/16] phy: qcom-qusb2: Add support for different register layouts
` [PATCH v4 08/16] dt-bindings: phy-qcom-qusb2: Update binding for QUSB2 V2 version
` [PATCH v4 09/16] phy: qcom-qusb2: Add support "
` [PATCH v4 10/16] phy: qcom-qmp: Move register offsets to header file
` [PATCH v4 11/16] phy: qcom-qmp: Add register offsets for QMP V3 PHY
` [PATCH v4 12/16] dt-bindings: phy-qcom-qmp: Update bindings for QMP V3 USB PHY
` [PATCH v4 13/16] phy: qcom-qmp: Add support for QMP V3 USB3 PHY
` [PATCH v4 14/16] phy: Add USB speed related PHY modes
` [PATCH v4 15/16] phy: qcom-qusb2: Add support for runtime PM
` [PATCH v4 16/16] phy: qcom-qmp: "
[GIT PULL] Qualcomm ARM64 Defconfig updates for 4.16
2018-01-05 10:54 UTC (12+ messages)
` [GIT PULL] Qualcomm ARM64 DT "
` [GIT PULL] Qualcomm Defconfig "
` [GIT PULL] Qualcomm Driver "
` [GIT PULL] Qualcomm Device Tree "
[PATCH] dmaengine: qcom_hidma: simplify DT resource parsing
2018-01-04 23:34 UTC (2+ messages)
[PATCH V4 00/26] PCI: deprecate pci_get_bus_and_slot()
2018-01-04 17:25 UTC (28+ messages)
` [PATCH V4 01/26] alpha/PCI: "
` [PATCH V4 05/26] agp: nvidia: "
` [PATCH V4 06/26] edd: "
` [PATCH V4 08/26] drm/gma500: "
` [PATCH V4 09/26] drm/nouveau: "
` [PATCH V4 11/26] iommu/amd: "
` [PATCH V4 22/26] video: fbdev: intelfb: "
` [PATCH V4 23/26] video: fbdev: nvidia: "
` [PATCH V4 24/26] video: fbdev: riva: "
` [PATCH V4 25/26] i7300_idle: remove unused file
[PATCH v11 0/6] Add support for Qualcomm A53 CPU clock
2018-01-04 16:56 UTC (12+ messages)
` [PATCH v11 2/6] mailbox: qcom: Create APCS child device for clock controller
` [PATCH v11 3/6] clk: qcom: Add A53 PLL support
` [PATCH v11 4/6] clk: qcom: Add regmap mux-div clocks support
` [PATCH v11 6/6] clk: qcom: Add APCS clock controller support
[PATCH v2 0/4] arm64: defconfig: enable additional led triggers
2018-01-04 16:54 UTC (5+ messages)
[PATCH v2] wcn36xx: Fix dynamic power saving
2018-01-04 16:48 UTC (2+ messages)
` [v2] "
[PATCH 3/3] [v6] pinctrl: qcom: qdf2xxx: add support for new ACPI HID QCOM8002
2018-01-04 16:04 UTC (13+ messages)
[RESEND PATCH v2 00/15] ASoC: qcom: Add support to QDSP6 based audio
2018-01-04 14:03 UTC (57+ messages)
` [RESEND PATCH v2 01/15] dt-bindings: soc: qcom: Add bindings for APR bus
` [RESEND PATCH v2 02/15] soc: qcom: add support to APR bus driver
` [RESEND PATCH v2 03/15] ASoC: qcom: qdsp6: Add common qdsp6 helper functions
` [RESEND PATCH v2 04/15] ASoC: qcom: qdsp6: Add support to Q6AFE
` [RESEND PATCH v2 05/15] ASoC: qcom: qdsp6: Add support to Q6ADM
` [RESEND PATCH v2 06/15] ASoC: qcom: qdsp6: Add support to Q6ASM
` [RESEND PATCH v2 07/15] ASoC: qcom: q6asm: Add support to memory map and unmap
` [RESEND PATCH v2 08/15] ASoC: qcom: q6asm: add support to audio stream apis
` [RESEND PATCH v2 09/15] ASoC: qcom: qdsp6: Add support to Q6CORE
` [RESEND PATCH v2 10/15] ASoC: qcom: qdsp6: Add support to q6routing driver
` [RESEND PATCH v2 11/15] ASoC: qcom: qdsp6: Add support to q6afe dai driver
` [RESEND PATCH v2 12/15] ASoC: qcom: qdsp6: Add support to q6asm "
` [RESEND PATCH v2 13/15] dt-bindings: sound: qcom: Add devicetree bindings for apq8096
` [RESEND PATCH v2 14/15] ASoC: qcom: apq8096: Add db820c machine driver
` [RESEND PATCH v2 15/15] arm64: dts: msm8996: db820c: Add sound card support
[PATCH v2] clk: qcom: Add support for controlling Fabia PLL
2018-01-04 12:20 UTC
wcnss_ctrl firmware loading
2018-01-04 11:41 UTC (3+ messages)
[PATCH 00/10] clk: qcom: CPU clock driver for msm8996
2018-01-04 11:15 UTC (12+ messages)
` [PATCH 01/10] soc: qcom: Separate kryo l2 accessors from PMU driver
` [PATCH 02/10] clk: qcom: Fix .set_rate to handle alpha PLLs w/wo dynamic update
` [PATCH 04/10] clk: qcom: Add CPU clock driver for msm8996
[PATCH v2 00/11] clk: qcom: CPU clock driver for msm8996
2018-01-04 11:10 UTC (12+ messages)
` [PATCH v2 01/11] soc: qcom: Separate kryo l2 accessors from PMU driver
` [PATCH v2 03/11] clk: qcom: Make clk_alpha_pll_configure available to modules
` [PATCH v2 07/11] clk: qcom: cpu-8996: Add support to switch below 600Mhz
` [PATCH v2 08/11] clk: qcom: clk-cpu-8996: Prepare PLLs on probe
` [PATCH v2 02/11] clk: qcom: Fix .set_rate to handle alpha PLLs w/wo dynamic update
` [PATCH v2 04/11] clk: qcom: Add CPU clock driver for msm8996
` [PATCH v2 05/11] clk: qcom: Add DT bindings for "
` [PATCH v2 06/11] clk: qcom: cpu-8996: Add support to switch to alternate PLL
` [PATCH v2 09/11] clk: qcom: Add ACD path to CPU clock driver for msm8996
` [PATCH v2 10/11] DT: QCOM: Add cpufreq-dt to msm8996
` [PATCH v2 11/11] DT: QCOM: Add thermal mitigation "
Initial msm8909 support
2018-01-04 10:37 UTC (8+ messages)
[PATCH -next] clk: qcom: msm8916: Fix return value check in qcom_apcs_msm8916_clk_probe()
2018-01-04 6:34 UTC
[PATCH v2 0/2] clk: qcom: MISC RCG changes for SDM845
2018-01-04 4:59 UTC (5+ messages)
` [PATCH v2 1/2] clk: qcom: Clear hardware clock control bit of RCG
` [PATCH v2 2/2] clk: qcom: Configure the RCGs to a safe source as needed
[RFC 0/3] drm/msm: Avoid subclassing of drm_atomic_state
2018-01-03 21:34 UTC (5+ messages)
` [RFC 1/3] drm/msm/mdp5: Add global state as a private atomic object
[PATCH v2 0/4] Remoteproc core dump support
2018-01-03 20:19 UTC (5+ messages)
` [PATCH v2 2/4] remoteproc: Rename "load_rsc_table" to "parse_fw"
[PATCH 00/12] account for const type of of_device_id.data
2018-01-03 18:23 UTC (6+ messages)
` [PATCH 04/12] PCI: qcom: "
[PATCH 1/1] base: power: runtime: Export pm_runtime_get/put_suppliers
2018-01-03 12:42 UTC (5+ messages)
[PATCH v3 01/34] clk_ops: change round_rate() to return unsigned long
2018-01-03 10:07 UTC (3+ messages)
` [PATCH v3 22/34] clk: qcom: ipq4019: change clk_cpu_div_round_rate() return logic
[PATCH] slimbus: qcom: add HAS_IOMEM dependency
2018-01-03 9:32 UTC
[PATCH 01/33] clk_ops: change round_rate() to return unsigned long
2018-01-02 23:28 UTC (10+ messages)
` [PATCH 21/33] clk: qcom: ipq4019: change clk_cpu_div_round_rate() return logic
[PATCH] drm/msm: Fix NULL deref in adreno_load_gpu
2018-01-02 18:32 UTC (3+ messages)
` [PATCH v2] "
[PATCH] arm64: dts: angler: add pstore-ramoops support
2018-01-02 18:09 UTC (2+ messages)
[PATCH 0/6] slimbus: sparse and CoverityScan fixes
2018-01-02 17:54 UTC (7+ messages)
` [PATCH 1/6] slimbus: avoid null pointer dereference on msg
` [PATCH 2/6] slimbus: fix retries comparison to correctly identify failed allocation
` [PATCH 3/6] slimbus: make functions slim_ack_txn and slim_alloc_txbuf static
` [PATCH 4/6] slimbus: Use GFP_ATOMIC under spin lock
` [PATCH 5/6] slimbus: Fix missing unlock on error in slim_msg_response()
` [PATCH 6/6] slimbus: qcom: Fix return value check in qcom_slim_probe()
[PATCH V3 0/6] PCI: handle CRS response following Hot Reset and D3hot->D0
2018-01-02 17:00 UTC (7+ messages)
` [PATCH V3 1/6] PCI: Protect restore with device lock to be consistent
` [PATCH V3 2/6] PCI: Handle FLR failure and allow other reset types
` [PATCH V3 3/6] PCI: Make pci_flr_wait() generic and rename to pci_dev_wait()
` [PATCH V3 4/6] PCI: Wait device ready after pci_pm_reset()
` [PATCH V3 5/6] PCI: Add a return type for pci_reset_bridge_secondary_bus()
` [PATCH V3 6/6] PCI: Add device wait after slot and bus reset
Help with DB820 reboot
2018-01-02 16:38 UTC (3+ messages)
[PATCH RFC 0/7] Introduce GENI SE Controller Driver
2018-01-02 15:55 UTC (8+ messages)
` [PATCH RFC 2/7] soc: qcom: Add device tree binding for GENI SE
` [PATCH RFC 4/7] i2c: Add device tree bindings for GENI I2C Controller
` [PATCH RFC 6/7] serial: Add device tree bindings for GENI based UART Controller
[PATCH V2 0/7] PCI: handle CRS response following Hot Reset and D3hot->D0
2018-01-02 15:47 UTC (4+ messages)
` [PATCH V2 3/7] PCI: make pci_flr_wait() generic and rename to pci_dev_wait()
[PATCH 0/3] [v11] pinctrl: qcom: add support for sparse GPIOs
2018-01-02 9:16 UTC (6+ messages)
[PATCH v3 00/16] Support for Qualcomm QUSBv2 and QMPv3 USB PHYs
2018-01-02 5:42 UTC (12+ messages)
` [PATCH v3 14/16] phy: Add notify_speed callback
[PATCH v2 22/34] clk: qcom: ipq4019: change clk_cpu_div_round_rate() return logic
2018-01-01 19:34 UTC
[PATCH v2 01/34] clk_ops: change round_rate() to return unsigned long
2018-01-01 19:07 UTC
[PATCH v2 0/3] arm64: defconfig: remove some Qualcomm USB options
2018-01-01 6:23 UTC (4+ messages)
Spende von € 3.400.000,00 EUR
2017-12-31 17:57 UTC
[PATCH] slimbus: qcom: fix incompatible pointer warning
2017-12-31 16:52 UTC (2+ messages)
[PATCH 2/2] clk: qcom: Configure the RCGs to a safe source as needed
2017-12-31 3:12 UTC (2+ messages)
ATTENTION!!!
2017-12-30 0:28 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox