linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
 messages from 2018-09-16 23:45:42 to 2018-09-20 19:01:11 UTC [more...]

[PATCH v3 00/16] Another round of tsens cleanups
 2018-09-20 19:01 UTC  (18+ messages)
` [PATCH v3 07/16] thermal: tsens: Pass register offsets as private data
` [PATCH v3 09/16] arm: dts: msm8974: thermal: split address space into two
` [PATCH v3 10/16] arm64: dts: msm8916: "
` [PATCH v3 11/16] arm: dts: msm8974: thermal: Add "qcom,sensors" property
` [PATCH v3 12/16] arm64: dts: msm8916: "
` [PATCH v3 14/16] arm64: dts: msm8916: Add gpu thermal zone
` [PATCH v3 15/16] arm64: dts: msm8916: Add camera "
` [PATCH v3 16/16] arm64: dts: sdm845: enable tsens thermal zones

[PATCH v4 0/6] Add power domain driver for corners on msm8996/sdm845
 2018-09-20 18:51 UTC  (6+ messages)
` [PATCH v4 2/6] dt-bindings: power: Add qcom rpm power domain driver bindings

[RFC] i2c: qup: Use the interconnect API
 2018-09-20 18:29 UTC 

[PATCH v2 0/2] Fix qcom geni i2c DMA handling
 2018-09-20 18:03 UTC  (3+ messages)
` [PATCH v2 1/2] i2c: i2c-qcom-geni: Properly handle DMA safe buffers
` [PATCH v2 2/2] i2c: i2c-qcom-geni: Simplify tx/rx functions

[PATCH v7 1/2] drm/panel: Add support for Truly NT35597 panel driver
 2018-09-20 17:45 UTC  (6+ messages)
` [PATCH v7 2/2] dt-bindings: Add Truly NT35597 panel driver bindings

[PATCH v2 0/7] drm/msm/dpu: Clean up dpu code
 2018-09-20 17:38 UTC  (11+ messages)
  ` [PATCH v2 1/7] drm/msm/dpu: Remove unneeded checks in dpu_plane.c
  ` [PATCH v2 2/7] drm/msm/dpu: Clean up plane atomic disable/update
  ` [PATCH v2 3/7] drm/msm/dpu: Remove unneeded checks in dpu_crtc.c
  ` [PATCH v2 4/7] drm/msm/dpu: Change _dpu_crtc_power_enable to void
  ` [PATCH v2 5/7] drm/msm/dpu: Change _dpu_crtc_vblank_enable_no_lock "
  ` [PATCH v2 6/7] drm/msm/dpu: Make dpu_plane_danger_signal_ctrl void
  ` [PATCH v2 7/7] drm/msm/dpu: Make _dpu_plane_get_aspace void

[PATCH] remoteproc: qcom: pas: Add QCS404 remoteprocs
 2018-09-20 17:22 UTC 

[PATCH v3 1/3] power: supply: Add support for the Qualcomm Battery Monitoring System
 2018-09-20 16:58 UTC  (9+ messages)
` [PATCH v7 1/4] fixp-arith: add a linear interpolation function
  ` [PATCH v7 2/4] power: supply: Add support for the Qualcomm Battery Monitoring System
  ` [PATCH v7 3/4] dt-bindings: power: supply: qcom_bms: Add bindings

[PATCH] pinctrl: qcom: spmi-gpio: Add pms405 gpio support
 2018-09-20 16:34 UTC  (4+ messages)

[PATCH] soc: qcom: smd-rpm: Add QCS404 compatible
 2018-09-20 16:18 UTC  (2+ messages)

[PATCH] regulators: qcom: Add PMS405 regulators
 2018-09-20 16:17 UTC  (2+ messages)

[PATCH] mailbox: qcom: Add QCS404 APPS Global compatible
 2018-09-20 16:17 UTC  (2+ messages)

[PATCH V4 0/4] spi-geni-qcom: QUP SPI GENI driver and SPI device tree bindings
 2018-09-20 15:39 UTC  (12+ messages)
` [PATCH V4 1/4] dt-bindings: soc: qcom: Remove SPI controller maximum frequency binding
` [PATCH V4 2/4] dt-bindings: soc: qcom: GENI SE SPI controller device tree binding
` [PATCH V4 3/4] spi: spi-geni-qcom: Add SPI driver support for GENI based QUP
` [PATCH V4 4/4] spi: spi-geni-qcom: Plugin API to assert and de-assert Chipselect

[PATCH 0/4] Qualcomm QCS404 TLMM pinctrl driver
 2018-09-20 15:34 UTC  (6+ messages)
` [PATCH 1/4] pinctrl: qcom: Introduce readl/writel accessors
` [PATCH 2/4] pinctrl: qcom: Support dispersed tiles
` [PATCH 3/4] dt-bindings: pinctrl: qcom: Add QCS404 pinctrl binding
` [PATCH 4/4] pinctrl: qcom: Add qcs404 pinctrl driver

[PATCH 0/6] drm/msm: dpu: Various cleanup patches
 2018-09-20 14:58 UTC  (7+ messages)
  ` [PATCH 1/6] drm/msm: Remove dpu_encoder_phys_ops->hw_reset()
  ` [PATCH 2/6] drm/msm: dpu: Remove unused functions from msm_media_info.h
  ` [PATCH 3/6] drm/msm: dpu: Remove _dpu_encoder_power_enable()
  ` [PATCH 4/6] drm/msm: dpu: Remove 'inline' from several functions
  ` [PATCH 5/6] drm/msm: dpu: Remove empty/useless labels
  ` [PATCH 6/6] drm/msm: dpu: Clean up _dpu_core_video_mode_intf_connected()

[PATCH V12 00/14] Krait clocks + Krait CPUfreq
 2018-09-20 14:27 UTC  (8+ messages)

[PATCH v2 0/1] Cold on & off support for Qualcomm BT chip wcn3990
 2018-09-20 13:48 UTC  (5+ messages)
` [PATCH v2 1/1] Bluetooth: hci_qca: Add poweroff support during hci down for wcn3990

[PATCH 1/1] iommu/arm-smmu: Add support to use Last level cache
 2018-09-20 11:41 UTC  (8+ messages)

[PATCH] power: reset: qcom-pon: Add pms405 pon support
 2018-09-20  9:42 UTC  (2+ messages)

[PATCH] firmware: Always initialize the fw_priv list object
 2018-09-20  7:38 UTC  (4+ messages)

[PATCH] i2c: i2c-qcom-geni: Properly handle DMA safe buffers
 2018-09-20  5:14 UTC  (5+ messages)

[PATCH v9 0/5] Venus updates - PIL
 2018-09-20  3:31 UTC  (11+ messages)
` [PATCH v9 1/5] venus: firmware: add routine to reset ARM9
` [PATCH v9 2/5] venus: firmware: move load firmware in a separate function
` [PATCH v9 3/5] venus: firmware: register separate platform_device for firmware loader
` [PATCH v9 4/5] venus: firmware: add no TZ boot and shutdown routine
` [PATCH v9 5/5] dt-bindings: media: Document bindings for venus firmware device

[PATCH] venus: vdec: fix decoded data size
 2018-09-20  3:02 UTC  (11+ messages)

[PATCH -next] pinctrl: qcom: spmi-mpp: Fix err handling of pmic_mpp_set_mux
 2018-09-20  1:58 UTC 

[PATCH] remoteproc: qcom: q6v5: Propagate EPROBE_DEFER
 2018-09-20  1:51 UTC 

[PATCH 1/3] drm/msm: dpu: Clear frame_busy_mask bit after trace
 2018-09-19 20:53 UTC  (7+ messages)
  ` [PATCH 2/3] drm/msm: dpu: Add extra_flush_bits to trigger_flush trace
  ` [PATCH 3/3] drm/msm: dpu: Don't store/deref pointers in trace ringbuffer

[PATCH 0/5] drm/msm/dpu: Clean up dpu code
 2018-09-19 19:14 UTC  (12+ messages)
  ` [PATCH 1/5] drm/msm/dpu: Remove unneeded checks from dpu_plane
  ` [PATCH 2/5] drm/msm/dpu: Clean up plane atomic disable/update
  ` [PATCH 3/5] drm/msm/dpu: Remove impossible checks
  ` [PATCH 4/5] drm/msm/dpu: Change _dpu_crtc_power_enable to void
  ` [PATCH 5/5] drm/msm/dpu: Change _dpu_crtc_vblank_enable_no_lock "

[PATCH 0/2] drm/msm: dpu: Fix cursor updates
 2018-09-19 18:56 UTC  (3+ messages)
  ` [PATCH 1/2] drm/msm: dpu: Only check flush register against pending flushes
  ` [PATCH 2/2] drm/msm: dpu: Make legacy cursor updates asynchronous

[PATCH 0/3] treewide: add vibrator support for various MSM SOCs
 2018-09-19 15:09 UTC  (4+ messages)
` [PATCH 1/3] dt-bindings: pwm: msm-vibrator: new bindings for MSM vibrator driver
` [PATCH 2/3] pwm: msm-vibrator: new driver for the vibrator found on various MSM SOCs
` [PATCH 3/3] ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for vibrator

[PATCH v8 0/5] Venus updates - PIL
 2018-09-19  7:38 UTC  (8+ messages)
` [PATCH v8 1/5] venus: firmware: add routine to reset ARM9
` [PATCH v8 2/5] venus: firmware: move load firmware in a separate function
` [PATCH v8 3/5] venus: firmware: register separate platform_device for firmware loader
` [PATCH v8 4/5] venus: firmware: add no TZ boot and shutdown routine
` [PATCH v8 5/5] dt-bindings: media: Document bindings for venus firmware device

[PATCH] soc: qcom: cmd-db: Fix some uninitialized warning
 2018-09-19  5:22 UTC 

[PATCH] ASoC: qcom: Fix a uninitialized warning
 2018-09-19  1:52 UTC  (3+ messages)

[PATCH 0/6] Tracing register accesses with pstore and dynamic debug
 2018-09-18 21:13 UTC  (23+ messages)
` [PATCH 1/6] dt-bindings: ramoops: Add event-size property
` [PATCH 2/6] pstore: Add event tracing support
` [PATCH 5/6] arm64/io: Add header for instrumentation of io operations

[PATCH v2 0/2] remoteproc: qcom: Rename adsp and mss drivers
 2018-09-18 16:26 UTC  (5+ messages)
` [PATCH v2 1/2] remoteproc: qcom: Rename Hexagon v5 PAS driver
` [PATCH v2 2/2] remoteproc: qcom: Rename Hexagon v5 modem driver

[PATCH V1 0/3] Internal voltage control for platform drivers
 2018-09-18 11:35 UTC  (4+ messages)
` [PATCH V1 3/3] mmc: sdhci-msm: Use internal voltage control

[PATCH v5 0/2] Add support for LPASS clock controller for SDM845
 2018-09-18 10:25 UTC  (3+ messages)
` [PATCH v5 1/2] dt-bindings: clock: Introduce QCOM LPASS clock bindings
` [PATCH v5 2/2] clk: qcom: Add lpass clock controller driver for SDM845

[PATCH v4 0/2] Add support for LPASS clock controller for SDM845
 2018-09-18 10:25 UTC  (3+ messages)
` [PATCH 1/2] dt-bindings: clock: Introduce QCOM LPASS clock bindings

[PATCH v2 0/2] qcom: remove memcpy()ing from cmd-db driver
 2018-09-18  3:18 UTC  (5+ messages)
` [PATCH v2 1/2] soc: qcom: cmd-db: Remove memcpy()ing from cmd_db_get_header()
` [PATCH v2 2/2] soc: qcom: cmd-db: Stop memcpy()ing in cmd_db_read_aux_data()

[PATCH v16 0/5] iommu/arm-smmu: Add runtime pm/sleep support
 2018-09-18  3:11 UTC  (7+ messages)
` [PATCH v16 2/5] iommu/arm-smmu: Invoke pm_runtime during probe, add/remove device

[PATCH 4.9 26/70] timers: Clear timer_base::must_forward_clk with timer_base::lock held
 2018-09-17 22:41 UTC 

[PATCH 4.18 035/158] cpu/hotplug: Adjust misplaced smb() in cpuhp_thread_fun()
 2018-09-17 22:41 UTC  (3+ messages)
` [PATCH 4.18 036/158] cpu/hotplug: Prevent state corruption on error rollback
` [PATCH 4.18 066/158] timers: Clear timer_base::must_forward_clk with timer_base::lock held

[PATCH 4.14 014/126] cpu/hotplug: Adjust misplaced smb() in cpuhp_thread_fun()
 2018-09-17 22:41 UTC  (3+ messages)
` [PATCH 4.14 015/126] cpu/hotplug: Prevent state corruption on error rollback
` [PATCH 4.14 035/126] timers: Clear timer_base::must_forward_clk with timer_base::lock held

[PATCH] drm/msm: dpu: Don't reset dpu_enc->cur_master on .disable()
 2018-09-17 20:49 UTC 

[PATCH 0/2] qcom: remove memcpy()ing from cmd-db driver
 2018-09-17 18:14 UTC  (3+ messages)

[PATCH] ARM: dts: qcom-apq8064: use correct pci address for address translation
 2018-09-17 17:52 UTC  (3+ messages)

[PATCH] drm/msm/dpu: Remove an unused enum
 2018-09-17 15:45 UTC  (2+ messages)

[PATCH v2 1/7] drm/msm: dpu: Remove impossible checks
 2018-09-17 15:44 UTC  (3+ messages)

[PATCH v2] PCI: qcom: Fix error handling in pm_runtime support
 2018-09-17 10:45 UTC  (2+ messages)

[PATCH 0/7] slimbus: fix module loading
 2018-09-16 23:45 UTC  (6+ messages)
` [PATCH 3/7] slimbus: core: match device tree based devices correctly
` [PATCH 4/7] slimbus: ngd: validate logical address assigned by remote
` [PATCH 5/7] silmbus: ngd: register controller after power up
` [PATCH 6/7] slimbus: ngd: return proper error code instead of zero
` [PATCH 7/7] slimbus: ngd: register ngd driver only once


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).