messages from 2020-06-03 05:31:59 to 2020-06-07 14:46:07 UTC [more...]
[PATCH v2 0/9] Summit SMB3xx driver & device-tree
2020-06-07 14:41 UTC (10+ messages)
` [PATCH v2 1/9] dt-bindings: power: supply: Add device-tree binding for Summit SMB3xx
` [PATCH v2 2/9] dt-bindings: battery: Add temperature properties
` [PATCH v2 3/9] power: supply: Support battery temperature device-tree properties
` [PATCH v2 4/9] power: supply: smb347-charger: Use resource-managed API
` [PATCH v2 5/9] power: supply: smb347-charger: Implement device-tree support
` [PATCH v2 6/9] power: supply: smb347-charger: Support SMB345 and SMB358
` [PATCH v2 7/9] power: supply: smb347-charger: Remove virtual smb347-battery
` [PATCH v2 8/9] power: supply: smb347-charger: Replace mutex with IRQ disable/enable
` [PATCH v2 9/9] ARM: dts: qcom: apq8064-nexus7: Add SMB345 charger node
[RFC PATCH] iommu/arm-smmu: Remove shutdown callback
2020-06-07 11:09 UTC
[Possible PATCH] iommu/qcom: Change CONFIG_BIG_ENDIAN to CONFIG_CPU_BIG_ENDIAN
2020-06-06 20:02 UTC (2+ messages)
[PATCH v5 00/11] Multiple fixes in PCIe qcom driver
2020-06-06 16:30 UTC (3+ messages)
` [PATCH v5 07/11] PCI: qcom: Define some PARF params needed for ipq8064 SoC
[PATCH v7 0/8] firmware: add partial read support in request_firmware_into_buf
2020-06-06 15:52 UTC (9+ messages)
` [PATCH v7 1/8] fs: introduce kernel_pread_file* support
` [PATCH v7 2/8] firmware: add offset to request_firmware_into_buf
` [PATCH v7 3/8] test_firmware: add partial read support for request_firmware_into_buf
` [PATCH v7 4/8] firmware: test partial file reads of request_firmware_into_buf
` [PATCH v7 5/8] bcm-vk: add bcm_vk UAPI
` [PATCH v7 7/8] MAINTAINERS: bcm-vk: add maintainer for Broadcom VK Driver
` [PATCH v7 8/8] ima: add FIRMWARE_PARTIAL_READ support
[PATCH] arm64: dts: qcom: sm8250: add I2C and SPI nodes
2020-06-06 13:13 UTC
[PATCH V2 0/3] Add ipq6018 apcs mailbox driver
2020-06-06 10:59 UTC (4+ messages)
` [PATCH V2 1/3] dt-bindings: mailbox: Add YAML schemas for QCOM APCS global block
` [PATCH V2 2/3] dt-bindings: mailbox: Add dt-bindings for ipq6018 apcs "
` [PATCH V2 3/3] mailbox: qcom: Add ipq6018 apcs compatible
[PATCH V7 0/4] Add APSS clock controller support for IPQ6018
2020-06-06 10:55 UTC (5+ messages)
` [PATCH V7 1/4] dt-bindings: clock: add ipq6018 a53 pll compatible
` [PATCH V7 2/4] clk: qcom: Add ipq apss pll driver
` [PATCH V7 3/4] clk: qcom: Add DT bindings for ipq6018 apss clock controller
` [PATCH V7 4/4] clk: qcom: Add "
[PATCH v6 0/8] firmware: add partial read support in request_firmware_into_buf
2020-06-06 4:56 UTC (13+ messages)
` [PATCH v6 1/8] fs: introduce kernel_pread_file* support
` [PATCH v6 2/8] firmware: add offset to request_firmware_into_buf
` [PATCH v6 3/8] test_firmware: add partial read support for request_firmware_into_buf
` [PATCH v6 4/8] firmware: test partial file reads of request_firmware_into_buf
` [PATCH v6 5/8] bcm-vk: add bcm_vk UAPI
` [PATCH v6 7/8] MAINTAINERS: bcm-vk: add maintainer for Broadcom VK Driver
` [PATCH v6 8/8] ima: add FIRMWARE_PARTIAL_READ support
[PATCH v3 0/6] Add support for GPU DDR BW scaling
2020-06-06 4:25 UTC (7+ messages)
` [PATCH v3 1/6] dt-bindings: drm/msm/gpu: Document gpu opp table
` [PATCH v3 2/6] drm: msm: a6xx: send opp instead of a frequency
` [PATCH v3 3/6] drm: msm: a6xx: use dev_pm_opp_set_bw to scale DDR
` [PATCH v3 4/6] arm64: dts: qcom: SDM845: Enable GPU DDR bw scaling
` [PATCH v3 5/6] arm64: dts: qcom: sc7180: Add interconnects property for GPU
` [PATCH v3 6/6] arm64: dts: qcom: sc7180: Add opp-peak-kBps to GPU opp
[PATCH v6 0/5] DDR/L3 Scaling support on SDM845 and SC7180 SoCs
2020-06-05 21:33 UTC (6+ messages)
` [PATCH v6 1/5] cpufreq: blacklist SDM845 in cpufreq-dt-platdev
` [PATCH v6 2/5] cpufreq: blacklist SC7180 "
` [PATCH v6 3/5] OPP: Add and export helper to set bandwidth
` [PATCH v6 4/5] cpufreq: qcom: Update the bandwidth levels on frequency change
` [PATCH v6 5/5] cpufreq: qcom: Disable fast switch when scaling DDR/L3
[PATCH 1/4] arm64: dts: qcom: msm8916: Set #address-cells for lpass
2020-06-05 18:59 UTC (4+ messages)
` [PATCH 2/4] arm64: dts: qcom: msm8916: Replace invalid bias-pull-none property
` [PATCH 3/4] arm64: dts: qcom: msm8916: Pull down PDM GPIOs during sleep
` [PATCH 4/4] arm64: dts: qcom: apq8016-sbc: Replace spaces with tabs
[RFC] METADATA design using V4l2 Request API
2020-06-05 17:43 UTC (7+ messages)
[PATCH v6 1/2] phy: qualcomm: add qcom ipq806x dwc usb phy driver
2020-06-05 17:00 UTC (4+ messages)
` [PATCH v6 2/2] devicetree: bindings: phy: Document ipq806x dwc3 qcom phy
` R: [PATCH v6 1/2] phy: qualcomm: add qcom ipq806x dwc usb phy driver
[PATCH 0/6] arm64: dts: qcom: smmu/USB nodes and HDK855/HDK865 dts
2020-06-05 15:04 UTC (18+ messages)
` [PATCH 1/6] arm64: dts: qcom: sm8150: add apps_smmu node
[PATCH 1/7] arm64: dts: qcom: pm8009: Add base dts file
2020-06-05 14:37 UTC (23+ messages)
` [PATCH 2/7] arm64: dts: qcom: sm8250: change spmi node label
` [PATCH 3/7] arm64: dts: qcom: sm8250-mtp: include pmic files
` [PATCH 4/7] arm64: dts: qcom: sm8x50: add empty thermal zone nodes
` [PATCH 5/7] arm64: dts: qcom: pm8150x: add thermal alarms and thermal zones
` [PATCH 6/7] arm64: dts: qcom: pm8150: enable rtc device
` [PATCH 7/7] arm64: dts: qcom: sm8250: add watchdog device
[v2] drm/msm: add shutdown support for display platform_driver
2020-06-05 14:11 UTC (6+ messages)
[PATCH V2 0/2] Add SDHC interconnect bandwidth scaling
2020-06-05 11:40 UTC (10+ messages)
` [PATCH V2 1/2] mmc: sdhci-msm: Add interconnect bandwidth scaling support
` [PATCH V2 2/2] dt-bindings: mmc: sdhci-msm: Add interconnect BW scaling strings
` =?y?q?=5BPATCH=C2=A0V3=200/2=5D=20Add=20SDHC=20interconnect=20bandwidth=20scaling=20?=
` =?y?q?=5BPATCH=C2=A0V3=201/2=5D=20mmc=3A=20sdhci-msm=3A=20Add=20interconnect=20bandwidth=20scaling=20support?=
` [PATCH V3 1/2] mmc: sdhci-msm: Add interconnect bandwidth scaling support
` =?y?q?=5BPATCH=C2=A0V3=202/2=5D=20dt-bindings=3A=20mmc=3A=20sdhci-msm=3A=20Add=20interconnect=20BW=20scaling=20strings?=
[PATCH v1] Bluetooth: hci_qca: Fix double free during SSR timeout
2020-06-05 4:53 UTC (3+ messages)
[PATCH] PCI: qcom: handle pm_runtime_get_sync failure case
2020-06-05 3:16 UTC
[PATCH v7 0/6] iommu/arm-smmu: Enable split pagetable support
2020-06-04 22:47 UTC (11+ messages)
` [PATCH v7 1/6] iommu/arm-smmu: Pass io-pgtable config to implementation specific function
` [PATCH v7 2/6] iommu/arm-smmu: Add support for split pagetables
` [PATCH v7 3/6] dt-bindings: arm-smmu: Add compatible string for Adreno GPU SMMU
` [PATCH v7 4/6] iommu/arm-smmu: Add implementation for the adreno "
` [PATCH v7 5/6] drm/msm: Set the global virtual address range from the IOMMU domain
` [PATCH v7 6/6] arm6: dts: qcom: sm845: Set the compatible string for the GPU SMMU
` [Freedreno] "
[PATCH v2] iommu/arm-smmu: Mark qcom_smmu_client_of_match as possibly unused
2020-06-04 20:39 UTC
[PATCH v6] drm/msm/dpu: ensure device suspend happens during PM sleep
2020-06-04 20:34 UTC (2+ messages)
[v2] drm/bridge: ti-sn65dsi86: ensure bridge suspend happens during PM sleep
2020-06-04 19:33 UTC (2+ messages)
[PATCH 1/2] remoteproc: qcom: q6v5: Update running state before requesting stop
2020-06-04 18:50 UTC (5+ messages)
[PATCH] Bluetooth: hci_qca: Fix double free during SSR timeout
2020-06-04 18:24 UTC
[PATCH V1 0/2] Add SDHC interconnect bandwidth scaling
2020-06-04 17:55 UTC (7+ messages)
` [PATCH V1 1/2] mmc: sdhci-msm: Add interconnect bandwidth scaling support
` [PATCH V1 2/2] dt-bindings: mmc: sdhci-msm: Add interconnect BW scaling strings
[PATCH] iommu/arm-smmu: Mark qcom_smmu_client_of_match as possibly unused
2020-06-04 15:20 UTC (2+ messages)
[RFC V1] mmc: core: Add partial initialization support
2020-06-04 13:29 UTC
[PATCH] clk: qcom: ipq4019: fix apss cpu overclocking
2020-06-04 12:09 UTC
[PATCH] drm/msm/dpu: ensure device suspend happens during PM sleep
2020-06-04 11:19 UTC (6+ messages)
` [Freedreno] "
[PATCH v7 0/4] ADD interconnect support for Qualcomm DWC3 driver
2020-06-04 11:16 UTC (5+ messages)
` [PATCH v7 2/4] usb: dwc3: qcom: Add interconnect support in dwc3 driver
[PATCH v2 0/4] msm8996 CPU scaling support
2020-06-04 10:35 UTC (5+ messages)
` [PATCH v2 1/4] soc: qcom: Separate kryo l2 accessors from PMU driver
` [PATCH v2 2/4] clk: qcom: Add CPU clock driver for msm8996
` [PATCH v2 3/4] dt-bindings: clk: qcom: Add bindings for CPU clock "
` [PATCH v2 4/4] arch: arm64: dts: msm8996: Add opp and thermal
[PATCH 0/3] Add LT9611 DSI to HDMI bridge
2020-06-04 7:38 UTC (9+ messages)
` [PATCH 2/3] dt-bindings: display: bridge: Add documentation for LT9611
` [PATCH 3/3] drm/bridge: Introduce LT9611 DSI to HDMI bridge
[PATCH 0/2] coresight: tmc: Add shutdown callback for TMC ETR/ETF
2020-06-04 7:27 UTC (21+ messages)
` [PATCH 2/2] "
[PATCH] scsi: ufs: Bump supported UFS HCI version to 3.0
2020-06-04 6:35 UTC
[PATCH] pinctrl: qcom: spmi-gpio: fix warning about irq chip reusage
2020-06-04 5:58 UTC (2+ messages)
[PATCH v6 0/6] Introduce Power domain based warming device driver
2020-06-04 1:53 UTC (7+ messages)
` [PATCH v6 1/6] PM/Domains: Add support for retrieving genpd performance states information
` [PATCH v6 2/6] soc: qcom: rpmhpd: Introduce function to retrieve power domain performance state count
` [PATCH v6 3/6] thermal: Add generic power domain warming device driver
` [PATCH v6 4/6] soc: qcom: Extend RPMh power controller driver to register warming devices
` [PATCH v6 5/6] dt-bindings: power: Extend RPMh power controller binding to describe thermal warming device
` [PATCH v6 6/6] arm64: dts: qcom: Indicate rpmhpd hosts a power domain that can be used as a "
[PATCH 4/4] arm64: dts: ipq6018: Add support for apcs clk
2020-06-04 0:19 UTC (2+ messages)
[v4] dt-bindings: msm: disp: add yaml schemas for DPU and DSI bindings
2020-06-03 22:45 UTC (2+ messages)
[PATCH 00/10] Enable GPU for SM8150 and SM8250
2020-06-03 18:20 UTC (7+ messages)
` [PATCH 08/10] clk: qcom: Add graphics clock controller driver for SM8250
[RFC 0/2] iommu: arm-smmu: Add support for early direct mappings
2020-06-03 17:23 UTC (12+ messages)
[PATCH 1/9] drm/msm: Don't call dma_buf_vunmap without _vmap
2020-06-03 12:46 UTC (4+ messages)
` [PATCH] "
[PATCH v2 0/4] irqchip: qcom: pdc: Introduce irq_set_wake call
2020-06-03 12:28 UTC (4+ messages)
` [PATCH v2 1/4] gpio: gpiolib: Allow GPIO IRQs to lazy disable
[PATCH V6 0/5] Add APSS clock controller support for IPQ6018
2020-06-03 5:31 UTC (7+ messages)
` [PATCH V6 4/5] clk: qcom: Add ipq6018 apss clock controller
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox