messages from 2020-07-02 09:34:27 to 2020-07-06 23:24:17 UTC [more...]
[PATCH v10 0/9] firmware: add request_partial_firmware_into_buf
2020-07-06 23:23 UTC (7+ messages)
` [PATCH v10 1/9] fs: move kernel_read_file* to its own include file
` [PATCH v10 2/9] fs: introduce kernel_pread_file* support
` [PATCH v10 3/9] firmware: add request_partial_firmware_into_buf
` [PATCH v10 4/9] test_firmware: add partial read support for request_firmware_into_buf
` [PATCH v10 5/9] firmware: test partial file reads of request_partial_firmware_into_buf
` [PATCH v10 6/9] bcm-vk: add bcm_vk UAPI
[PATCH v2] pinctrl: qcom: sc7180: Make gpio28 non wakeup capable for google,lazor
2020-07-06 20:38 UTC (3+ messages)
[RESEND PATCH v2 00/13] Enable GPU for SM8150 and SM8250
2020-07-06 19:50 UTC (14+ messages)
` [RESEND PATCH v2 06/13] dt-bindings: clock: Introduce SM8150 QCOM Graphics clock bindings
` [RESEND PATCH v2 07/13] dt-bindings: clock: Introduce SM8250 "
[PATCH V5 0/4] Signaling api support in glink/rpmsg clients
2020-07-06 18:04 UTC (2+ messages)
[qemu] boot failed: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
2020-07-06 17:36 UTC (8+ messages)
[PATCH 0/4] interconnect: qcom: Misc bcm-voter changes and fixes
2020-07-06 16:45 UTC (8+ messages)
` [PATCH 1/4] interconnect: qcom: Support bcm-voter-specific TCS wait behavior
` [PATCH 4/4] interconnect: qcom: Fix small BW votes being truncated to zero
[PATCH v2 0/4] DVFS support for dpu and dsi
2020-07-06 16:10 UTC (6+ messages)
` [PATCH v2 1/4] drm/msm/dpu: Use OPP API to set clk/perf state
` [PATCH v2 2/4] drm/msm: dsi: "
` [PATCH v2 3/4] arm64: dts: sdm845: Add DSI and MDP OPP tables and power-domains
` [PATCH v2 4/4] arm64: dts: sc7180: "
[PATCH 0/3] QSPI: Add DVFS support
2020-07-06 15:58 UTC (7+ messages)
` [PATCH 1/3] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
` [PATCH 2/3] arm64: dts: sdm845: Add qspi opps and power-domains
` [PATCH 3/3] arm64: dts: sc7180: "
[PATCH] venus: move platform specific data to platform file
2020-07-06 15:37 UTC (2+ messages)
[PATCH] venus: Add platform specific capabilities
2020-07-06 15:37 UTC (2+ messages)
[PATCH -next] mmc: sdhci-msm: Make function sdhci_msm_dump_vendor_regs() static
2020-07-06 14:49 UTC (2+ messages)
[PATCH V1 0/3] Internal voltage control for qcom SDHC
2020-07-06 14:49 UTC (3+ messages)
` [PATCH V5 "
[PATCH 1/1] mmc: host: sdhci-msm: fix spelling mistake
2020-07-06 14:48 UTC (2+ messages)
[PATCH 29/32] usb: dwc3: dwc3-qcom: Do not define 'struct acpi_device_id' when !CONFIG_ACPI
2020-07-06 13:33 UTC
[PATCH] PCI: qcom: fix runtime pm imbalance on error
2020-07-06 9:58 UTC (2+ messages)
[PATCH 0/4] Make Frame Skip Mode control a standard
2020-07-05 15:29 UTC (6+ messages)
` [PATCH 1/4] media: v4l2-ctrl: Add frame-skip std encoder control
` [PATCH 2/4] venus: venc: Add support for frame-skip mode v4l2 control
` [PATCH 3/4] media: s5p-mfc: Use standard frame skip mode control
` [PATCH 4/4] media: docs: Depricate mfc frame skip control
[PATCH] soc: qcom-geni-se: fix configury of qcom-geni-se.c
2020-07-05 14:50 UTC
[PATCH] ARM: dts: qcom: add prng definition to ipq806x
2020-07-05 14:25 UTC
[PATCH 0/9] Add PCIe support for IPQ8074
2020-07-05 9:18 UTC (10+ messages)
` [PATCH 1/9] dt-bindings: pci: Add ipq8074 gen3 pci compatible
` [PATCH 2/9] dt-bindings: phy: qcom,qmp: Add dt-binding for ipq8074 gen3 pcie phy
` [PATCH 3/9] clk: qcom: ipq8074: Add missing bindings for pcie
` [PATCH 4/9] clk: qcom: ipq8074: Add missing clocks "
` [PATCH 5/9] phy: qcom-qmp: use correct values for ipq8074 gen2 pcie phy init
` [PATCH 6/9] phy: qcom-qmp: Add compatible for ipq8074 pcie gen3 qmp phy
` [PATCH 7/9] pci: dwc: qcom: do phy power on before pcie init
` [PATCH 8/9] pci: qcom: Add support for ipq8074 pci controller
` [PATCH 9/9] arm64: dts: ipq8074: Fixup pcie dts nodes
[PATCH V6] serial: msm_geni_serial_console : Add Earlycon support
2020-07-05 6:10 UTC (2+ messages)
[PATCH] firmware: qcom_scm: Fix legacy convention SCM accessors
2020-07-04 17:23 UTC
[PATCH v4 0/9] Introduce features and debugfs/sysfs entries for MHI
2020-07-04 15:54 UTC (19+ messages)
` [PATCH v4 1/9] bus: mhi: core: Remove double occurrence for mhi_ctrl_ev_task() declaration
` [PATCH v4 2/9] bus: mhi: core: Abort suspends due to outgoing pending packets
` [PATCH v4 3/9] bus: mhi: core: Use helper API to trigger a non-blocking host resume
` [PATCH v4 4/9] bus: mhi: core: Trigger a host resume when device vote is requested
` [PATCH v4 5/9] bus: mhi: core: Use generic name field for an MHI device
` [PATCH v4 6/9] bus: mhi: core: Introduce helper function to check device state
` [PATCH v4 7/9] bus: mhi: core: Introduce debugfs entries and counters for MHI
` [PATCH v4 8/9] bus: mhi: core: Read and save device hardware information from BHI
` [PATCH v4 9/9] bus: mhi: core: Introduce sysfs entries for MHI
[PATCH v3 00/34] iommu: Move iommu_group setup to IOMMU core code
2020-07-04 0:17 UTC (3+ messages)
[PATCH v5 0/5] msm8996 CPU scaling support
2020-07-03 19:33 UTC (8+ messages)
` [PATCH v5 1/5] soc: qcom: Separate kryo l2 accessors from PMU driver
` [PATCH v5 2/5] clk: qcom: Add CPU clock driver for msm8996
` [PATCH v5 3/5] dt-bindings: clk: qcom: Add bindings for CPU clock "
` [PATCH v5 4/5] arch: arm64: dts: msm8996: Rename speedbin node
` [PATCH v5 5/5] arch: arm64: dts: msm8996: Add CPU opps and thermal
[PATCH] arm64: defcondfig: Enable USB ACM and FTDI drivers
2020-07-03 18:53 UTC
[PATCH v4 0/20] backlight: backlight updates
2020-07-03 18:45 UTC (21+ messages)
` [PATCH v4 01/20] backlight: refactor fb_notifier_callback()
` [PATCH v4 02/20] backlight: add backlight_is_blank()
` [PATCH v4 03/20] backlight: improve backlight_ops documentation
` [PATCH v4 04/20] backlight: improve backlight_properties documentation
` [PATCH v4 05/20] backlight: improve backlight_device documentation
` [PATCH v4 06/20] backlight: document inline functions in backlight.h
` [PATCH v4 07/20] backlight: document enums "
` [PATCH v4 08/20] backlight: remove the unused backlight_bl driver
` [PATCH v4 09/20] backlight: drop extern from prototypes
` [PATCH v4 10/20] backlight: add overview and update existing doc
` [PATCH v4 11/20] backlight: wire up kernel-doc documentation
` [PATCH v4 12/20] backlight: introduce backlight_get_brightness()
` [PATCH v4 13/20] backlight: as3711_bl: simplify update_status
` [PATCH v4 14/20] backlight: cr_bllcd: introduce backlight_is_blank()
` [PATCH v4 15/20] backlight: gpio_backlight: simplify update_status()
` [PATCH v4 16/20] backlight: jornada720_bl: introduce backlight_is_blank()
` [PATCH v4 17/20] backlight: use backligt_get_brightness()
` [PATCH v4 18/20] backlight: drop backlight_put()
` [PATCH v4 19/20] backlight: make of_find_backlight static
` [PATCH v4 20/20] backlight: make of_find_backlight_by_node() static
[PATCHv3 0/7] System Cache support for GPU and required SMMU support
2020-07-03 16:59 UTC (7+ messages)
` [PATCHv3 7/7] drm/msm/a6xx: Add support for using system cache(LLC)
[PATCH 0/3] Add Kryo4xx gold and silver cores to applicable errata list
2020-07-03 16:35 UTC (4+ messages)
` [PATCH 3/3] arm64: Add KRYO4XX silver CPU cores to erratum list 1530923 and 1024718
[PATCH 2/2] drm/msm: Quiet error during failure in optional resource mappings
2020-07-03 16:13 UTC (2+ messages)
[PATCH 3/3] arm64: Add KRYO4XX silver CPU cores to erratum list 1530923 and 1024718
2020-07-03 15:38 UTC (2+ messages)
[net-next,PATCH 0/4] net: mdio-ipq4019: add Clause 45 and clock support
2020-07-03 13:35 UTC (16+ messages)
` [net-next,PATCH 1/4] net: mdio-ipq4019: change defines to upper case
` [net-next,PATCH 2/4] net: mdio-ipq4019: add clock support
` [net-next,PATCH 3/4] net: mdio-ipq4019: add Clause 45 support
` [net-next,PATCH 4/4] dt-bindings: mdio-ipq4019: add clock support
[PATCH v2 0/4] msm8996 CPU scaling support
2020-07-03 13:18 UTC (4+ messages)
` [PATCH v2 1/4] soc: qcom: Separate kryo l2 accessors from PMU driver
[PATCH v5 0/6] Introduce PMIC based USB type C detection
2020-07-03 12:52 UTC (8+ messages)
` [PATCH v5 1/6] usb: typec: Add QCOM PMIC typec detection driver
` [PATCH v5 2/6] dt-bindings: usb: Add Qualcomm PMIC type C controller dt-binding
` [PATCH v5 3/6] arm64: boot: dts: qcom: pm8150b: Add node for USB type C block
` [PATCH v5 4/6] regulator: Add support for QCOM PMIC VBUS booster
` [PATCH v5 5/6] dt-bindings: regulator: Add dt-binding for QCOM PMIC VBUS output regulator
` [PATCH v5 6/6] arm64: boot: dts: qcom: pm8150b: Add DTS node for PMIC VBUS booster
[RFC][PATCH 0/5] Allow for qcom-pdc, pinctrl-msm and qcom-scm drivers to be loadable as modules
2020-07-03 12:49 UTC (6+ messages)
` [RFC][PATCH 5/5] firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent module
[PATCH v2 0/8] arm64: dts: qcom: smmu/USB nodes and HDK855/HDK865 dts
2020-07-03 12:31 UTC (2+ messages)
[PATCH v6 0/6] Introduce Power domain based warming device driver
2020-07-03 10:02 UTC (3+ messages)
` [PATCH v6 3/6] thermal: Add generic power domain "
[PATCH V6 00/10] remoteproc: qcom: q6v5-wcss: Add support for secure pil
2020-07-03 9:02 UTC (11+ messages)
` [PATCH V6 01/10] remoteproc: qcom: Add PRNG proxy clock
` [PATCH V6 02/10] remoteproc: qcom: Add secure PIL support
` [PATCH V6 03/10] remoteproc: qcom: Add support for split q6 + m3 wlan firmware
` [PATCH V6 04/10] remoteproc: qcom: Add ssr subdevice identifier
` [PATCH V6 05/10] remoteproc: qcom: Update regmap offsets for halt register
` [PATCH V6 06/10] dt-bindings: clock: qcom: Add reset for WCSSAON
` [PATCH V6 07/10] clk: qcom: Add WCSSAON reset
` [PATCH V6 08/10] dt-bindings: firmware: qcom: Add compatible for IPQ8074 SoC
` [PATCH V6 09/10] arm64: dts: Add support for scm on IPQ8074 SoCs
` [PATCH V6 10/10] arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC
[PATCH v5 0/7] Add non PAS wcss Q6 support for QCS404
2020-07-03 8:58 UTC (11+ messages)
` [v6 0/4] "
` [v6 1/4] remoteproc: qcom: wcss: populate hardcoded param using driver data
` [v6 2/4] dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding for QCS404
` [v6 3/4] remoteproc: qcom: wcss: Add non pas wcss Q6 support "
` [v6 4/4] remoteproc: qcom: wcss: explicitly request exclusive reset control
` [v7 0/4] Add non PAS wcss Q6 support for QCS404
` [v7 1/4] remoteproc: qcom: wcss: populate hardcoded param using driver data
` [v7 2/4] dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding for QCS404
` [v7 3/4] remoteproc: qcom: wcss: Add non pas wcss Q6 support "
` [v7 4/4] remoteproc: qcom: wcss: explicitly request exclusive reset control
[PATCH 1/2] pinctrl: qcom: ipq4019: add open drain support
2020-07-03 8:06 UTC (2+ messages)
` [PATCH 2/2] dt-bindings: pinctrl: qcom: add drive-open-drain to ipq4019
[PATCH] drm/msm/dpu: fix wrong return value in dpu_encoder_init()
2020-07-03 4:19 UTC (2+ messages)
[PATCH 0/6] Add SM8150 and SM8250 interconnect drivers
2020-07-02 20:49 UTC (6+ messages)
` [PATCH 1/6] dt-bindings: interconnect: Add Qualcomm SM8150 DT bindings
` [PATCH 2/6] dt-bindings: interconnect: Add Qualcomm SM8250 "
[PATCH v2] arm64: dts: qcom: sdm845: Add cpu OPP tables
2020-07-02 20:46 UTC
[PATCH v9 0/7] iommu/arm-smmu: Enable split pagetable support
2020-07-02 20:22 UTC (3+ messages)
` [PATCH v9 2/7] iommu/arm-smmu: Add support for split pagetables
[PATCH][next] regulator: fix null pointer check on regmap
2020-07-02 15:47 UTC (2+ messages)
[PATCH v2 0/5] Allow for qcom-pdc, pinctrl-msm and qcom-scm drivers to be loadable as modules
2020-07-02 14:18 UTC (4+ messages)
` [PATCH v2 5/5] firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent module
[PATCH] drm/msm/dpu: fix wrong return value in dpu_encoder_init()
2020-07-02 14:04 UTC
[PATCH v4 0/4] msm8996 CPU scaling support
2020-07-02 13:43 UTC (7+ messages)
` [PATCH v4 1/4] soc: qcom: Separate kryo l2 accessors from PMU driver
` [PATCH v4 2/4] clk: qcom: Add CPU clock driver for msm8996
` [PATCH v4 3/3] arch: arm64: dts: msm8996: Add opp and thermal
` [PATCH v4 3/4] dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996
` [PATCH v4 4/4] arch: arm64: dts: msm8996: Add opp and thermal
[PATCH v3 0/4] msm8996 CPU scaling suppor
2020-07-02 13:42 UTC (5+ messages)
` [PATCH v3 4/4] arch: arm64: dts: msm8996: Add opp and thermal
[PATCH] PCI: qcom: handle pm_runtime_get_sync failure case
2020-07-02 10:27 UTC (2+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox