messages from 2023-01-13 10:24:57 to 2023-01-13 21:22:08 UTC [more...]
[PATCH 1/2] phy: qcom-qmp-pcie: fix the regs layout table for sm8450 gen3x1 PHY
2023-01-13 21:21 UTC (2+ messages)
` [PATCH 2/2] phy: qcom-qmp-usb: fix the regs layout table for sdx65 uniphy PHY
[PATCH 1/2] phy: qcom-qmp-combo: remove QPHY_PCS_LFPS_RXTERM_IRQ_STATUS reg
2023-01-13 21:21 UTC (2+ messages)
` [PATCH 2/2] phy: qcom-qmp-combo: rework regs layout arrays
[RFC PATCH 0/4] drm/msm/mdss: rework UBWC setup
2023-01-13 21:16 UTC (14+ messages)
` [RFC PATCH 1/4] drm/msm/mdss: convert UBWC setup to use match data
` [RFC PATCH 2/4] drm/msm/mdss: correct the ubwc version for sm6115 platform
` [RFC PATCH 3/4] drm/msm/mdss: add data for sc8180xp
[PATCH] dt-bindings: display/msm/dsi-phy: drop unused allOf clauses
2023-01-13 21:14 UTC (3+ messages)
[PATCH v6 00/11] dt-bindings: display/msm: rework MDP5 and MDSS schema
2023-01-13 21:12 UTC (8+ messages)
` [PATCH v6 01/11] dt-bindings: display/msm: convert MDP5 schema to YAML format
` [PATCH v6 04/11] dt-bindings: display/msm: rename mdss nodes to display-subsystem
[PATCH v13 00/15] Add Multi Circular Queue Support
2023-01-13 20:48 UTC (16+ messages)
` [PATCH v13 01/15] ufs: core: Probe for ext_iid support
` [PATCH v13 02/15] ufs: core: Introduce Multi-circular queue capability
` [PATCH v13 03/15] ufs: core: Defer adding host to scsi if mcq is supported
` [PATCH v13 04/15] ufs: core: mcq: Add support to allocate multiple queues
` [PATCH v13 05/15] ufs: core: mcq: Configure resource regions
` [PATCH v13 06/15] ufs: core: mcq: Calculate queue depth
` [PATCH v13 07/15] ufs: core: mcq: Allocate memory for mcq mode
` [PATCH v13 08/15] ufs: core: mcq: Configure operation and runtime interface
` [PATCH v13 09/15] ufs: core: mcq: Use shared tags for MCQ mode
` [PATCH v13 10/15] ufs: core: Prepare ufshcd_send_command for mcq
` [PATCH v13 11/15] ufs: core: mcq: Find hardware queue to queue request
` [PATCH v13 12/15] ufs: core: Prepare for completion in mcq
` [PATCH v13 13/15] ufs: mcq: Add completion support of a cqe
` [PATCH v13 14/15] ufs: core: mcq: Add completion support in poll
` [PATCH v13 15/15] ufs: core: mcq: Enable Multi Circular Queue
[PATCH v6] dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
2023-01-13 20:46 UTC (2+ messages)
[PATCH] dt-bindings: clock: qcom,a53pll: drop operating-points-v2
2023-01-13 20:28 UTC (2+ messages)
[PATCH] arm64: dts: qcom: sc8280xp: Define CMA region for CRD and X13s
2023-01-13 20:16 UTC (3+ messages)
[PATCH] clk: qcom: Remove need for clk_ignore_unused on sc8280xp
2023-01-13 20:14 UTC (2+ messages)
[PATCH] dt-bindings: qcom: geni-se: Fix '#address-cells' & '#size-cells' related dt-binding error
2023-01-13 20:10 UTC
[PATCH] phy: qualcomm: qmp-ufs: rename qmp_ufs_offsets_v5 to qmp_ufs_offsets
2023-01-13 19:55 UTC
[PATCH 1/2] dt-bindings: cpufreq: Make reg-names a required property
2023-01-13 19:41 UTC (5+ messages)
` [PATCH 2/2] cpufreq: qcom-hw: Ensure only freq-domain regs are counted in num_domains
[PATCH v6 0/6] arm64: dts: qcom: sm6125: UFS and xiaomi-laurel-sprout support
2023-01-13 19:31 UTC (6+ messages)
` [PATCH v6 2/6] dt-bindings: phy: Add QMP UFS PHY compatible for SM6125
` [PATCH v6 3/6] phy: qcom-qmp: Add SM6125 UFS PHY support
[PATCH 1/2] dt-bindings: PCI: qcom: Allow both GIC-ITS and internal MSI controller
2023-01-13 19:17 UTC (2+ messages)
[PATCH v2 0/6] phy: qualcomm: Add UFS support for SM8550
2023-01-13 18:35 UTC (3+ messages)
` [PATCH v2 6/6] phy: qcom-qmp-ufs: Add SM8550 support
[PATCH v2 0/4] soc: qcom: icc-bwmon: Add support for llcc and cpu bwmon on sc7280
2023-01-13 18:18 UTC (3+ messages)
` [PATCH v2 4/4] arm64: dts: qcom: sc7280: Add cpu and llcc BWMON
` [PATCH v2 4/4] arm64: dts: qcom: sc7280: Add cpu and llcc BWMON (=> interconnect issue)
[PATCH 1/2] dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: correct SC7280 compatibles
2023-01-13 18:18 UTC (2+ messages)
[PATCH] dt-bindings: phy: qcom,qusb2: do not define properties in "if" block
2023-01-13 18:17 UTC (2+ messages)
[PATCH 1/4] dt-bindings: phy: qcom,usb-snps-femto-v2: use fallback compatibles
2023-01-13 18:10 UTC (2+ messages)
[PATCH v3 00/51] cpuidle,rcu: Clean up the mess
2023-01-13 18:06 UTC (2+ messages)
[PATCH] dt-bindings: phy: qcom,usb-hsic-phy: convert to DT schema
2023-01-13 18:00 UTC (2+ messages)
[PATCH] Revert "phy: qualcomm: usb28nm: Add MDM9607 init sequence"
2023-01-13 17:46 UTC (2+ messages)
[PATCH 0/3] Add Qualcomm SM6115 and SM4250 USB3 PHY support
2023-01-13 17:43 UTC (2+ messages)
[PATCH v2 0/4] soc: qcom: Introduce PMIC GLINK
2023-01-13 17:10 UTC (3+ messages)
[PATCH 00/18] arm64: qcom: add support for sa8775p-ride
2023-01-13 16:58 UTC (4+ messages)
` [PATCH 18/18] arm64: dts: qcom: add initial support for qcom sa8775p-ride
[PATCH 1/2] Revert "soc: qcom: rpmpd: Add SM4250 support"
2023-01-13 16:49 UTC (5+ messages)
` [PATCH 2/2] Revert "dt-bindings: power: "
[PATCH v2 1/9] arm64: dts: qcom: ipq8074: fix Gen2 PCIe QMP PHY
2023-01-13 16:44 UTC (9+ messages)
` [PATCH v2 2/9] arm64: dts: qcom: ipq8074: fix Gen3 "
` [PATCH v2 3/9] arm64: dts: qcom: ipq8074: correct Gen2 PCIe ranges
` [PATCH v2 4/9] arm64: dts: qcom: ipq8074: set Gen2 PCIe pcie max-link-speed
` [PATCH v2 5/9] dt-bindings: PCI: qcom: alphabetically sort compatibles
` [PATCH v2 6/9] dt-bindings: PCI: qcom: document IPQ8074 Gen3 port
` [PATCH v2 7/9] PCI: qcom: Add support for "
` [PATCH v2 8/9] arm64: dts: qcom: ipq8074: fix Gen3 PCIe node
` [PATCH v2 9/9] arm64: dts: qcom: ipq8074: correct PCIe QMP PHY output clock names
[PATCH 0/6] Add regulator support for IPQ9574 SoC
2023-01-13 16:43 UTC (12+ messages)
` [PATCH 1/6] soc: qcom: smd-rpm: Add IPQ9574 compatible
` [PATCH 2/6] dt-bindings: soc: qcom: smd-rpm: Add IPQ9574 compatible string
` [PATCH 3/6] regulator: qcom_smd: Add MP5496 regulators
` [PATCH 4/6] regulator: qcom_smd: Add PMIC compatible for IPQ9574
` [PATCH 5/6] arm64: dts: qcom: ipq9574: Add cpufreq & RPM related nodes
` [PATCH 6/6] regulator: qcom_smd: Add support to define the bootup voltage
[PATCH 0/5] Enable crashdump collection support for IPQ9574
2023-01-13 16:41 UTC (9+ messages)
` [PATCH 1/5] dt-bindings: scm: Add compatible "
` [PATCH 2/5] arm64: dts: Add support for Crashdump collection on IPQ9574
` [PATCH 3/5] firmware: scm: Modify only the DLOAD bit in TCSR register for download mode
` [PATCH 4/5] arm64: defconfig: Enable scm download mode config for IPQ9574 SoC
` [PATCH 5/5] dt-bindings: tcsr: Add compatible for IPQ9574
[PATCH 7/9] PCI: qcom: add support for IPQ8074 Gen3 port
2023-01-13 16:41 UTC (4+ messages)
[PATCH 1/6] arm64: dts: qcom: sm8250: drop unused clock-frequency from rx-macro
2023-01-13 16:22 UTC (6+ messages)
` [PATCH 2/6] arm64: dts: qcom: sdm845: move WCD9340 codec to separate file
` [PATCH 3/6] arm64: dts: qcom: sdm845-audio-wcd9340: commonize pinctrl
` [PATCH 4/6] arm64: dts: qcom: sdm845-audio-wcd9340: commonize clocks
` [PATCH 5/6] arm64: dts: qcom: sc8280xp: drop bogus clock-controller property
` [PATCH 6/6] arm64: dts: qcom: sc8280xp: drop unused properties from tx-macro
[PATCH 1/3] ASoC: dt-bindings: qcom,wsa881x: Allow sound-name-prefix
2023-01-13 16:22 UTC (3+ messages)
` [PATCH 2/3] ASoC: dt-bindings: qcom,wcd934x: Describe slim-ifc-dev
` [PATCH 3/3] ASoC: dt-bindings: qcom,wcd934x: Allow usage as IFD device
[PATCH 0/6] Add APSS clock controller support for IPQ9574
2023-01-13 16:17 UTC (14+ messages)
` [PATCH 1/6] dt-bindings: clock: Add YAML schemas for QCOM A73 PLL
` [PATCH 2/6] clk: qcom: ipq9574: Enable APSS clock driver
` [PATCH 3/6] arm64: defconfig: Enable ipq6018 apss clock and PLL controller
` [PATCH 4/6] arm64: dts: qcom: ipq9574: Add support for APSS clock controller
` [PATCH 5/6] dt-bindings: mailbox: Add compatible for IPQ9574
` [PATCH 6/6] clk: qcom: Fix APSS PLL and RCG Configuration
[PATCH V10 0/2] SCM: Add support for wait-queue aware firmware
2023-01-13 16:11 UTC (3+ messages)
` [PATCH V10 1/2] dt-bindings: firmware: qcom,scm: Add optional interrupt
` [PATCH V10 2/2] firmware: qcom: scm: Add wait-queue handling logic
[PATCH 0/4] PCI: qcom: use clk_bulk API
2023-01-13 15:54 UTC (5+ messages)
` [PATCH 2/4] PCI: qcom: Use clk_bulk_ API for 1.0.0 clocks handling
[PATCH v3 0/2] PCI: qcom: Add support for modular builds
2023-01-13 15:51 UTC (2+ messages)
[PATCH] arm64: dts: qcom: sdm845-db845c: drop label from I2C controllers
2023-01-13 14:52 UTC
[PATCH] dt-bindindgs: i2c: qcom,i2c-geni: document operating-points-v2
2023-01-13 14:49 UTC
[PATCH 0/8] Modem support for MSM8226
2023-01-13 14:49 UTC (3+ messages)
` [PATCH 4/8] dt-bindings: mfd: qcom,tcsr: Add compatible "
[PATCH 0/7] Add minimal boot support for IPQ9574
2023-01-13 14:30 UTC (38+ messages)
` [PATCH 1/7] dt-bindings: arm64: ipq9574: Add binding descriptions for clock and reset
` [PATCH 3/7] dt-bindings: pinctrl: qcom: Add ipq9574 pinctrl bindings
` [PATCH 4/7] pinctrl: qcom: Add IPQ9574 pinctrl driver
` [PATCH 5/7] dt-bindings: qcom: Add ipq9574 bindings
` [PATCH 6/7] arm64: dts: Add ipq9574 SoC and AL02 board support
` [PATCH 7/7] arm64: defconfig: Enable IPQ9574 SoC base configs
` [PATCH 2/7] clk: qcom: Add Global Clock Controller driver for IPQ9574
[PATCH v2] dt-bindings: PCI: qcom,pcie-ep: correct qcom,perst-regs
2023-01-13 14:23 UTC (3+ messages)
[PATCH v3 00/14] clk: qcom: cpu-8996: stability fixes
2023-01-13 14:13 UTC (20+ messages)
` [PATCH v3 01/14] dt-bindings: clock: qcom,msm8996-apcc: add sys_apcs_aux clock
` [PATCH v3 02/14] clk: qcom: clk-alpha-pll: program PLL_TEST/PLL_TEST_U if required
` [PATCH v3 03/14] clk: qcom: cpu-8996: correct PLL programming
` [PATCH v3 04/14] clk: qcom: cpu-8996: fix the init clock rate
` [PATCH v3 05/14] clk: qcom: cpu-8996: support using GPLL0 as SMUX input
` [PATCH v3 06/14] clk: qcom: cpu-8996: skip ACD init if the setup is valid
` [PATCH v3 07/14] clk: qcom: cpu-8996: simplify the cpu_clk_notifier_cb
` [PATCH v3 08/14] clk: qcom: cpu-8996: setup PLLs before registering clocks
` [PATCH v3 09/14] clk: qcom: cpu-8996: move qcom_cpu_clk_msm8996_acd_init call
` [PATCH v3 10/14] clk: qcom: cpu-8996: fix PLL configuration sequence
` [PATCH v3 11/14] clk: qcom: cpu-8996: fix ACD initialization
` [PATCH v3 12/14] clk: qcom: cpu-8996: fix PLL clock ops
` [PATCH v3 13/14] clk: qcom: cpu-8996: change setup sequence to follow vendor kernel
` [PATCH v3 14/14] arm64: dts: qcom: msm8996: support using GPLL0 as kryocc input
[PATCH v2 0/7] watchdog: dt-bindings: rework/fix qcom-wdt
2023-01-13 14:03 UTC (15+ messages)
` [PATCH v2 1/7] dt-bindings: watchdog: qcom-wdt: require fallback for IPQ4019
` [PATCH v2 2/7] dt-bindings: watchdog: qcom-wdt: do not allow fallback alone
` [PATCH v2 3/7] dt-bindings: watchdog: qcom-wdt: fix list of MSM timer compatibles
` [PATCH v2 4/7] dt-bindings: watchdog: qcom-wdt: add qcom,kpss-wdt-mdm9615
` [PATCH v2 5/7] dt-bindings: watchdog: qcom-wdt: allow interrupts
` [PATCH v2 6/7] dt-bindings: watchdog: qcom-wdt: merge MSM timer
` [PATCH v2 7/7] dt-bindings: watchdog: allow "timer" as node name
[PATCH 00/13] clk: qcom: cpu-8996: stability fixes
2023-01-13 14:02 UTC (15+ messages)
` [PATCH 09/13] clk: qcom: cpu-8996: fix PLL configuration sequence
` [PATCH 10/13] clk: qcom: cpu-8996: fix ACD initialization
` [PATCH 11/13] clk: qcom: cpu-8996: fix PLL clock ops
[RESEND PATCH 1/2] clk: qcom: clk-rcg2: introduce support for multiple conf for same freq
2023-01-13 13:50 UTC (3+ messages)
[PATCH V4] clk: qcom: clk-alpha-pll: Add support for Stromer PLLs
2023-01-13 13:36 UTC (3+ messages)
[PATCH v6 0/6] Krait Documentation conversion
2023-01-13 13:18 UTC (4+ messages)
` [PATCH v6 2/6] dt-bindings: arm: msm: Convert and split kpss-acc driver Documentation to yaml
[PATCH v3 1/3] dt-bindings: phy: qcom,qmp-usb3-dp: Add sm6350 compatible
2023-01-13 13:01 UTC (7+ messages)
` [PATCH v3 2/3] phy: qcom-qmp-combo: Add config for SM6350
[PATCH v2] dt-bindings: pinctrl: qcom,sdm845-pinctrl: add GPIO hogs
2023-01-13 10:51 UTC (2+ messages)
[PATCH 1/9] dt-bindings: pinctrl: qcom,sc8280xp-lpass-lpi: correct pins pattern
2023-01-13 10:50 UTC (14+ messages)
` [PATCH 2/9] dt-bindings: pinctrl: qcom,sc8280xp-lpass-lpi: add input-enable and bias-bus-hold
` (subset) "
` [PATCH 3/9] dt-bindings: pinctrl: qcom,sm6350-tlmm: add gpio-line-names
` (subset) "
` [PATCH 4/9] dt-bindings: pinctrl: qcom,sm8350-tlmm: "
` (subset) "
` [PATCH 5/9] dt-bindings: pinctrl: qcom,sm6350-tlmm: correct pins pattern
` (subset) "
` [PATCH 6/9] dt-bindings: pinctrl: qcom,sm8350-tlmm: "
` (subset) "
` [PATCH 7/9] dt-bindings: pinctrl: qcom: allow nine interrupts on SM6350
` (subset) "
` (subset) [PATCH 1/9] dt-bindings: pinctrl: qcom,sc8280xp-lpass-lpi: correct pins pattern
[PATCH v6 00/20] thermal/drivers/tsens: specify nvmem cells in DT rather than parsing them manually
2023-01-13 10:32 UTC (3+ messages)
[RESEND PATCH] dt-bindings: thermal: qcom-spmi-adc-tm5: add qcom,adc-tm7
2023-01-13 10:24 UTC (2+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox