messages from 2023-04-05 06:46:59 to 2023-04-06 14:59:02 UTC [more...]
[PATCH 0/3] drivers/thermal/qcom/tsens: Add ability to read and shift-in non-contiguous calibration data
2023-04-06 14:58 UTC (3+ messages)
` [PATCH 1/3] thermal/drivers/tsens: Add error/debug prints to calibration read
` [PATCH 2/3] thermal/drivers/tsens: Describe sensor registers via a structure
[PATCH 0/2] spi: Add DMA mode support to spi-qcom-qspi
2023-04-06 14:53 UTC (4+ messages)
` [PATCH 2/2] spi: spi-qcom-qspi: Add DMA mode support
[PATCH v2 0/2] Introduce RPM Master stats
2023-04-06 14:49 UTC (3+ messages)
` [PATCH v2 1/2] dt-bindings: soc: qcom: Add "
` [PATCH v2 2/2] soc: qcom: Introduce RPM master stats driver
[PATCH RFT v2 00/14] SMD RPMCC sleep preparations
2023-04-06 14:44 UTC (9+ messages)
` [PATCH RFT v2 01/14] dt-bindings: clock: qcom,rpmcc: Add a way to enable unused clock cleanup
` [PATCH RFT v2 02/14] clk: qcom: smd-rpm: Add .is_enabled hook
[PATCH v3 00/18] arm64: dts: qcom: sa8775p: add basic PMIC support
2023-04-06 14:10 UTC (6+ messages)
` [PATCH v3 03/18] dt-bindings: interrupt-controller: qcom-pdc: add compatible for sa8775p
` [PATCH v3 12/18] dt-bindings: pinctrl: qcom,pmic-gpio: add compatible for pmm8654au-gpio
[net-next PATCH v6 00/16] net: Add basic LED support for switch/phy
2023-04-06 14:10 UTC (10+ messages)
` [net-next PATCH v6 12/16] dt-bindings: net: dsa: qca8k: add LEDs definition example
` [net-next PATCH v6 16/16] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port
[PATCH v6 0/8] Add multiport support for DWC3 controllers
2023-04-06 14:07 UTC (16+ messages)
` [PATCH v6 1/8] dt-bindings: usb: Add bindings for multiport properties on DWC3 controller
` [PATCH v6 2/8] usb: dwc3: core: Access XHCI address space temporarily to read port info
` [PATCH v6 3/8] usb: dwc3: core: Skip setting event buffers for host only controllers
` [PATCH v6 4/8] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
` [PATCH v6 5/8] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
` [PATCH v6 6/8] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280
` [PATCH v6 7/8] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports
` [PATCH v6 8/8] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller
[PATCH v6 00/11] arm64: qcom: Enable Crypto Engine for a few Qualcomm SoCs
2023-04-06 13:59 UTC (15+ messages)
` [PATCH v6 01/11] dt-bindings: dma: Add support for SM6115 and QCM2290 SoCs
` [PATCH v6 02/11] dt-bindings: dma: Increase iommu maxItems for BAM DMA
` [PATCH v6 03/11] arm64: dts: qcom: sdm8550: Fix the BAM DMA engine compatible string
` [PATCH v6 04/11] arm64: dts: qcom: sdm845: Fix the slimbam "
` [PATCH v6 05/11] dt-bindings: qcom-qce: Fix compatible combinations for SM8150 and IPQ4019 SoCs
` [PATCH v6 06/11] dt-bindings: qcom-qce: Add compatibles for SM6115 and QCM2290
` [PATCH v6 07/11] arm64: dts: qcom: sm6115: Add Crypto Engine support
` [PATCH v6 08/11] arm64: dts: qcom: sm8150: "
` [PATCH v6 09/11] arm64: dts: qcom: sm8250: "
` [PATCH v6 10/11] arm64: dts: qcom: sm8350: "
` [PATCH v6 11/11] arm64: dts: qcom: sm8450: add crypto nodes
[PATCH 0/7] arm64: dts: qcom: sa8775p: add more IOMMUs
2023-04-06 13:28 UTC (6+ messages)
` [PATCH 2/7] clk: qcom: add the GPUCC driver for sa8775p
` [PATCH 3/7] arm64: defconfig: enable the SA8775P GPUCC driver
[PATCH v2 0/7] soundwire: qcom: add support for SM8550 (Soundwire v2.0.0)
2023-04-06 13:28 UTC (7+ messages)
` [PATCH v2 5/7] soundwire: qcom: prepare for handling different register layouts
` [PATCH v2 6/7] soundwire: qcom: add support for v2.0.0 controller
` [PATCH v2 7/7] soundwire: qcom: use tabs for indentation in defines
[PATCH v5 0/8] QAIC accel driver
2023-04-06 13:15 UTC (8+ messages)
[PATCH v3 0/2] ATH10K YAML conversion
2023-04-06 12:55 UTC (3+ messages)
` [PATCH v3 1/2] dt-bindings: net: Convert ATH10K to YAML
` [PATCH v3 2/2] arm64: dts: qcom: sdm845-polaris: Drop inexistent properties
[PATCH v2 0/2] ATH10K YAML conversion
2023-04-06 12:52 UTC (5+ messages)
` [PATCH v2 1/2] dt-bindings: net: Convert ATH10K to YAML
` [PATCH v2 2/2] arm64: dts: qcom: sdm845-polaris: Drop inexistent properties
[PATCH v2] dt-bindings: iommu: Convert QCOM IOMMU to YAML
2023-04-06 11:58 UTC
[PATCH] soc: qcom: rpmh-rsc: Support RSC v3 minor versions
2023-04-06 11:57 UTC
[PATCH 0/2] ATH10K YAML conversion
2023-04-06 11:47 UTC (6+ messages)
` [PATCH 1/2] dt-bindings: net: Convert ATH10K to YAML
` [PATCH 2/2] arm64: dts: qcom: sdm845-polaris: Drop inexistent properties
[PATCH] clk: qcom: gcc-qcm2290: Mark RCGs shared where applicable
2023-04-06 11:27 UTC (4+ messages)
[PATCH V2 0/2] Add initial support for RDP468 of IPQ5332 family
2023-04-06 11:22 UTC (2+ messages)
[PATCH v2 0/5] soc: qcom: llcc: Add support for QDU1000/QRU1000
2023-04-06 11:03 UTC (7+ messages)
` [PATCH v2 2/5] dt-bindings: arm: msm: Add bindings for multi channel DDR in LLCC
[PATCH v3 0/4] Allow genpd providers to power off domains on sync state
2023-04-06 10:59 UTC (8+ messages)
[PATCH net-next v3 00/12] Add EMAC3 support for sa8540p-ride
2023-04-06 8:57 UTC (3+ messages)
` [PATCH net-next v3 12/12] net: stmmac: dwmac-qcom-ethqos: Add EMAC3 support
[PATCH net] net: qrtr: Fix an uninit variable access bug in qrtr_tx_resume()
2023-04-06 8:34 UTC (4+ messages)
[PATCH] dt-bindings: iommu: Convert QCOM IOMMU to YAML
2023-04-06 8:10 UTC (2+ messages)
[PATCH net-next] net: qrtr: correct types of trace event parameters
2023-04-06 8:07 UTC (2+ messages)
[PATCH v8 0/8] Enable IPQ9754 USB
2023-04-06 7:43 UTC (13+ messages)
` [PATCH v8 1/8] dt-bindings: phy: qcom,qusb2: Document IPQ9574 compatible
` [PATCH v8 2/8] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY
` [PATCH v8 3/8] dt-bindings: usb: dwc3: Add IPQ9574 compatible
` [PATCH v8 4/8] clk: qcom: gcc-ipq9574: Add USB related clocks
` [PATCH v8 5/8] phy: qcom-qusb2: add QUSB2 support for IPQ9574
` [PATCH v8 6/8] phy: qcom: qmp: Update IPQ9574 USB Phy initialization Sequence
` [PATCH v8 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes
` [PATCH v8 8/8] arm64: dts: qcom: ipq9574: Enable USB
[PATCH] soundwire: qcom: Fix enumeration of second device on the bus
2023-04-06 7:03 UTC (3+ messages)
[PATCH V3 0/5] Add regulator support for IPQ9574 SoC
2023-04-06 7:00 UTC (6+ messages)
` [PATCH V3 1/5] regulator: qcom_smd: Add s1 sub-node to mp5496 regulator
` [PATCH V3 2/5] regulator: qcom_smd: Add MP5496 S1 regulator
` [PATCH V3 3/5] arm64: dts: qcom: ipq9574: Add RPM related nodes
` [PATCH V3 4/5] arm64: dts: qcom: ipq9574: Add SMPA1 regulator node
` [PATCH V3 5/5] arm64: dts: qcom: ipq9574: Add cpufreq support
[PATCH V3 0/5] Add APSS clock controller support for IPQ9574
2023-04-06 6:13 UTC (6+ messages)
` [PATCH V3 1/5] dt-bindings: clock: qcom,a53pll: add IPQ9574 compatible
` [PATCH V3 2/5] clk: qcom: apss-ipq-pll: Add support for IPQ9574
` [PATCH V3 3/5] dt-bindings: mailbox: qcom: add compatible for IPQ9574 SoC
` [PATCH V3 4/5] arm64: dts: qcom: ipq9574: Add support for APSS clock controller
` [PATCH V3 5/5] arm64: defconfig: Enable ipq6018 apss clock and PLL controller
[PATCH v2 0/2] Resolve MPM register space situation
2023-04-06 4:08 UTC (7+ messages)
` [PATCH v2 1/2] dt-bindings: interrupt-controller: mpm: Pass MSG RAM slice through phandle
` [PATCH v2 2/2] irqchip: irq-qcom-mpm: Support passing a slice of SRAM as reg space
[PATCH 0/3] rpmsg: Convert to platform remove callback returning void
2023-04-06 4:04 UTC (2+ messages)
[PATCH] dt-bindings: net: ethernet-switch: Make "#address-cells/#size-cells" required
2023-04-06 1:00 UTC (4+ messages)
[PATCH v4 0/6] Introduce MSM-specific DSC helpers
2023-04-05 23:37 UTC (16+ messages)
` [PATCH v4 1/6] drm/msm: Add MSM-specific DSC helper methods
` [Freedreno] "
` [PATCH v4 3/6] drm/msm/dpu: Fix slice_last_group_size calculation
` [PATCH v4 4/6] drm/msm/dsi: Use MSM and DRM DSC helper methods
` [PATCH v4 5/6] drm/msm/dsi: update hdisplay calculation for dsi_timing_setup
` [PATCH v4 6/6] drm/msm/dsi: Fix calculations pkt_per_line
[PATCH v5 0/2] Enable USB SS qmp phy for Qualcomm SM6115 SoC
2023-04-05 19:55 UTC (6+ messages)
` [PATCH v5 1/2] dt-bindings: phy: qcom,qmp-usb: Fix phy subnode for SM6115 & QCM2290 USB3 PHY
` [PATCH v5 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node
[PATCH v4 0/2] Enable USB SS qmp phy for Qualcomm SM6115 SoC
2023-04-05 19:01 UTC (7+ messages)
` [PATCH v4 1/2] dt-bindings: phy: qcom,qmp-usb: Fix phy subnode for SM6115 & QCM2290 USB3 PHY
` [PATCH v4 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node
[PATCH 0/2] Introduce RPM Master stats
2023-04-05 16:48 UTC (5+ messages)
` [PATCH 1/2] dt-bindings: soc: qcom: Add "
` [PATCH 2/2] soc: qcom: Introduce RPM master stats driver
[PATCH 1/5] arm64: dts: qcom: sc8280xp: label the Soundwire nodes
2023-04-05 15:52 UTC (10+ messages)
` [PATCH 2/5] arm64: dts: qcom: sm8450: "
` [PATCH 3/5] arm64: dts: qcom: sc8280xp: simplify interrupts-extended
` [PATCH 4/5] arm64: dts: qcom: sm8250: "
` [PATCH 5/5] arm64: dts: qcom: sm8450: "
[PATCH v2 0/5] RB1 + QCM2290 support
2023-04-05 15:50 UTC (6+ messages)
` [PATCH v2 1/5] dt-bindings: firmware: document Qualcomm QCM2290 SCM
` [PATCH v2 2/5] dt-bindings: arm: qcom: Add QRB2210/QCM2290 and RB1 board
` [PATCH v2 3/5] arm64: dts: qcom: Add initial QCM2290 device tree
` [PATCH v2 4/5] arm64: dts: qcom: Add initial PM2250 "
` [PATCH v2 5/5] arm64: dts: qcom: Add initial QTI RB1 "
[PATCH v3] arm64: dts: qcom: sm8550: add Soundwire controllers
2023-04-05 15:45 UTC (2+ messages)
[PATCH] drm/msm: Check for the GPU IOMMU during bind
2023-04-05 15:37 UTC (3+ messages)
[PATCH V4] nvmem: add explicit config option to read old syntax fixed OF cells
2023-04-05 13:01 UTC (2+ messages)
[PATCH 0/3] Few corrections in non-tz firmware boot
2023-04-05 12:45 UTC (5+ messages)
` [PATCH 2/3] venus: firmware: Correct non-pix start and end addresses
[PATCH v1 0/3] Fixes for PSR
2023-04-05 11:38 UTC (2+ messages)
[PATCH v7 0/8] Enable IPQ9754 USB
2023-04-05 11:36 UTC (10+ messages)
` [PATCH v7 1/8] dt-bindings: phy: qcom,qusb2: Document IPQ9574 compatible
` [PATCH v7 2/8] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY
` [PATCH v7 3/8] dt-bindings: usb: dwc3: Add IPQ9574 compatible
` [PATCH v7 4/8] clk: qcom: gcc-ipq9574: Add USB related clocks
` [PATCH v7 5/8] phy: qcom-qusb2: add QUSB2 support for IPQ9574
` [PATCH v7 6/8] phy: qcom: qmp: Update IPQ9574 USB Phy initialization Sequence
` [PATCH v7 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes
` [PATCH v7 8/8] arm64: dts: qcom: ipq9574: Enable USB
[PATCH v6 0/8] Enable IPQ9754 USB
2023-04-05 10:00 UTC (11+ messages)
` [PATCH v6 1/8] dt-bindings: phy: qcom,qusb2: Document IPQ9574 compatible
` [PATCH v6 2/8] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY
` [PATCH v6 3/8] dt-bindings: usb: dwc3: Add IPQ9574 compatible
` [PATCH v6 4/8] clk: qcom: gcc-ipq9574: Add USB related clocks
` [PATCH v6 5/8] phy: qcom-qusb2: add QUSB2 support for IPQ9574
` [PATCH v6 6/8] phy: qcom: qmp: Update IPQ9574 USB Phy initialization Sequence
` [PATCH v6 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes
` [PATCH v6 8/8] arm64: dts: qcom: ipq9574: Enable USB
[PATCH] media: venus: dec: Fix handling of the start cmd
2023-04-05 9:42 UTC (9+ messages)
` [PATCH v2] "
[PATCH v5 0/8] Enable IPQ9754 USB
2023-04-05 9:11 UTC (7+ messages)
` [PATCH v5 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes
[PATCH 0/3] fix decoder issues with firmware version check
2023-04-05 8:21 UTC (11+ messages)
` [PATCH 1/3] venus: add firmware version based check
` [PATCH 2/3] venus: enable sufficient sequence change support for vp9
` [PATCH 3/3] venus: fix EOS handling in decoder stop command
[PATCH v4] venus: venc: add handling for VIDIOC_ENCODER_CMD
2023-04-05 7:15 UTC
[PATCH v2 0/8] drm/msm: Convert fbdev to DRM client
2023-04-05 7:13 UTC (3+ messages)
[PATCH V2 0/9] Add PCIe support for IPQ9574
2023-04-05 6:58 UTC (8+ messages)
` [PATCH V2 3/9] dt-bindings: phy: qcom,qmp-pcie: Add ipq9574 bindings
` [PATCH V2 5/9] dt-bindings: PCI: qcom: Add IPQ9574
` [PATCH V2 6/9] dt-bindings: pinctrl: qcom: Add few missing functions
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox