messages from 2023-05-26 10:24:37 to 2023-05-27 03:57:06 UTC [more...]
[PATCH 0/4] SM8450 GPUCC
2023-05-27 4:00 UTC (2+ messages)
` (subset) "
[PATCH] soc: qcom: mdt_loader: Fix unconditional call to scm_pas_mem_setup
2023-05-27 4:00 UTC (3+ messages)
[PATCH v4 0/7] Add support for MHI Endpoint function driver
2023-05-27 3:34 UTC (5+ messages)
` [PATCH v4 4/7] PCI: endpoint: Add BME notifier support
` [EXT] "
[PATCH v5 0/5] spi: Add DMA mode support to spi-qcom-qspi
2023-05-27 1:07 UTC (2+ messages)
` (subset) "
[PATCH 1/2] clk: qcom: gcc-ipq6018: update UBI32 PLL
2023-05-27 1:07 UTC (6+ messages)
` [PATCH 2/2] clk: qcom: ipq6018: fix networking resets
` (subset) [PATCH 1/2] clk: qcom: gcc-ipq6018: update UBI32 PLL
[PATCH 0/3] Enable download mode support for IPQ SOCs
2023-05-27 1:07 UTC (6+ messages)
` [PATCH 1/3] dt-bindings: mfd: qcom,tcsr: add the compatible for IPQ8074
` [PATCH 2/3] arm64: dts: qcom: enable the download mode support
` [PATCH 3/3] arm64: dts: qcom: add few more reserved memory region
` (subset) [PATCH 0/3] Enable download mode support for IPQ SOCs
[PATCH V2] clk: qcom: ipq5332: fix the order of SLEEP_CLK and XO clock
2023-05-27 1:07 UTC (2+ messages)
[PATCH V2 0/4] Add QFPROM support for few IPQ SoCs
2023-05-27 1:07 UTC (9+ messages)
` [PATCH V2 1/4] dt-bindings: nvmem: qfprom: add compatible "
` [PATCH V2 2/4] arm64: dts: qcom: ipq5332: add QFPROM node
` [PATCH V2 3/4] arm64: dts: qcom: ipq6018: "
` [PATCH V2 4/4] arm64: dts: qcom: ipq9574: "
[PATCH] clk: qcom: ipq5332: fix the src parameter in ftbl_gcc_apss_axi_clk_src
2023-05-27 1:07 UTC (2+ messages)
[PATCH 0/5] Improvements for drv260x driver and add to Huawei Watch
2023-05-27 1:07 UTC (2+ messages)
` (subset) "
[RFT RFC PATCH] arm64: dts: qcom: sdm630-nile: correct duplicated reserved memory node
2023-05-27 1:07 UTC (2+ messages)
[RFT PATCH 1/3] arm64: dts: qcom: msm8996: correct /soc/bus ranges
2023-05-27 1:07 UTC (2+ messages)
` (subset) "
[PATCH 1/6] arm64: dts: qcom: ipq6018: drop incorrect SPI bus spi-max-frequency
2023-05-27 1:07 UTC (2+ messages)
` (subset) "
[PATCH 1/3] arm64: dts: qcom: msm8916: correct LPASS CPU clocks order
2023-05-27 1:07 UTC (2+ messages)
` (subset) "
[PATCH v2 0/2] QCM2290 dispcc fixups
2023-05-27 1:07 UTC (2+ messages)
[PATCH 0/4] ARM: dts: qcom: apq8074-dragonboard enable DSI and remoteproc
2023-05-27 1:07 UTC (2+ messages)
` (subset) "
[PATCH 1/2] clk: qcom: mmcc-msm8974: use clk_rcg2_shared_ops for mdp_clk_src clock
2023-05-27 1:07 UTC (2+ messages)
` (subset) "
[PATCH v8 00/11] arm64: qcom: Enable Crypto Engine for a few Qualcomm SoCs
2023-05-27 1:07 UTC (15+ messages)
` [PATCH v8 01/11] dt-bindings: dma: Add support for SM6115 and QCM2290 SoCs
` [PATCH v8 02/11] dt-bindings: dma: Increase iommu maxItems for BAM DMA
` [PATCH v8 03/11] arm64: dts: qcom: sdm8550: Fix the BAM DMA engine compatible string
` [PATCH v8 04/11] arm64: dts: qcom: sdm845: Fix the slimbam "
` [PATCH v8 05/11] dt-bindings: qcom-qce: Fix compatible combinations for SM8150 and IPQ4019 SoCs
` [PATCH v8 06/11] dt-bindings: qcom-qce: Add compatibles for SM6115 and QCM2290
` [PATCH v8 07/11] arm64: dts: qcom: sm6115: Add Crypto Engine support
` [PATCH v8 08/11] arm64: dts: qcom: sm8150: "
` [PATCH v8 09/11] arm64: dts: qcom: sm8250: "
` [PATCH v8 10/11] arm64: dts: qcom: sm8350: "
` [PATCH v8 11/11] arm64: dts: qcom: sm8450: add crypto nodes
` (subset) [PATCH v8 00/11] arm64: qcom: Enable Crypto Engine for a few Qualcomm SoCs
[PATCH v3 1/2] clk: Add generic sync_state callback for disabling unused clocks
2023-05-27 0:13 UTC (11+ messages)
[PATCH 1/5] ARM: Add label to sleep_clk in qcom-msm8960.dtsi
2023-05-26 23:36 UTC (5+ messages)
` [PATCH 4/5] ARM: Blindly copy the usb node from apq8064.dtsi
` [PATCH 5/5] ARM: Add Samsung Galaxy Express support
[PATCH v6 0/5] Refactor to support multiple download mode
2023-05-26 23:36 UTC (14+ messages)
` [PATCH v6 1/5] firmware: qcom_scm: provide a read-modify-write function
` [PATCH v6 2/5] pinctrl: qcom: Use qcom_scm_io_update_field()
` [PATCH v6 3/5] firmware: scm: Modify only the download bits in TCSR register
` [PATCH v6 4/5] firmware: qcom_scm: Refactor code to support multiple download mode
` [PATCH v6 5/5] firmware: qcom_scm: Add multiple download mode support
[PATCH v3 0/4] arm64: dts: qcom: qdu1000: add SDHCI
2023-05-26 23:22 UTC (3+ messages)
` [PATCH v3 4/4] arm64: dts: qcom: qdu1000-idp: add SDHCI for emmc
[PATCH] arm64: dts: qcom: pmk8350: disable ADC by default
2023-05-26 23:21 UTC (2+ messages)
[PATCH v2 0/5] Enable PMI8998 charger on supported devices
2023-05-26 21:50 UTC (6+ messages)
` [PATCH v2 1/5] arm64: dts: qcom: pmi8998: enable rradc by default
` [PATCH v2 2/5] arm64: dts: qcom: pmi8998: add charger node
` [PATCH v2 3/5] arm64: dts: qcom: sdm845-oneplus: enable pmi8998 charger
` [PATCH v2 4/5] arm64: dts: qcom: sdm845-shift-axolotl: "
` [PATCH v2 5/5] arm64: dts: qcom: sdm845-xiaomi-beryllium: "
[PATCH v9 0/2] power: supply: introduce support for the Qualcomm smb2 charger
2023-05-26 21:44 UTC (3+ messages)
` [PATCH v9 1/2] dt-bindings: power: supply: qcom,pmi8998-charger: add bindings for smb2 driver
` [PATCH v9 2/2] power: supply: add Qualcomm PMI8998 SMB2 Charger driver
[PATCH 0/6] Enable PMI8998 charger on supported devices
2023-05-26 21:41 UTC (11+ messages)
` [PATCH 2/6] arm64: dts: qcom: pmi8998: enable rradc by default
` [PATCH 3/6] arm64: dts: qcom: pmi8998: add charger node
` [PATCH 5/6] arm64: dts: qcom: sdm845-shift-axolotl: enable pmi8998 charger
` [PATCH 6/6] arm64: dts: qcom: sdm845-xiaomi-beryllium: "
[PATCH v2 0/3] media: camss: Link CAMSS power domain on MSM8996
2023-05-26 21:38 UTC (18+ messages)
` [PATCH v2 1/3] dt-bindings: media: camss: qcom,msm8996-camss: Add CAMSS power domain
` [PATCH v2 2/3] arm64: dts: qcom: msm8996: Add CAMSS power domain and power-domain-names to CAMSS
` [PATCH v2 3/3] media: camss: Link CAMSS power domain
[PATCH 0/8] arm64: dts: qcom: msm8916: Rework regulator constraints
2023-05-26 21:11 UTC (16+ messages)
` [PATCH 3/8] arm64: dts: qcom: msm8916: Fix "
` [PATCH 7/8] arm64: dts: qcom: msm8916: Define regulator constraints next to usage
` [PATCH 8/8] arm64: dts: qcom: msm8916-pm8916: Mark always-on regulators
[PATCH v5 1/5] soc: qcom: socinfo: move SMEM item struct and defines to a header
2023-05-26 21:06 UTC (7+ messages)
` [PATCH v5 2/5] soc: qcom: smem: Switch to EXPORT_SYMBOL_GPL()
` [PATCH v5 3/5] soc: qcom: smem: introduce qcom_smem_get_soc_id()
` [PATCH v5 4/5] cpufreq: qcom-nvmem: use SoC ID-s from bindings
` [PATCH v5 5/5] cpufreq: qcom-nvmem: use helper to get SMEM SoC ID
[PATCH 6/8] arm64: dts: qcom: Add support for GCC and RPMHCC for SDX75
2023-05-26 20:59 UTC (2+ messages)
[PATCH 0/2] Add initial support for RDP453 of IPQ9574 family
2023-05-26 20:45 UTC (6+ messages)
` [PATCH 1/2] dt-bindings: arm: qcom: document AL02-C8 board based on "
` [PATCH 2/2] arm64: dts: qcom: ipq9574: add support for RDP453 variant
[PATCH V2] clk: qcom: camcc-sc7180: Add parent dependency to all camera GDSCs
2023-05-26 20:37 UTC (4+ messages)
[PATCH 0/4] arm64: qcom: sm8550: enable PMIC devices
2023-05-26 19:53 UTC (9+ messages)
` [PATCH 1/4] arm64: dts: qcom: pm8550: add PWM controller
` [PATCH 2/4] arm64: dts: qcom: sm8550-qrd: add notification RGB LED
` [PATCH 3/4] arm64: dts: qcom: sm8550: enable PMIC RTC on MTP & QRD boards
` [PATCH 4/4] arm64: dts: qcom: sm8550-qrd: enable PMIC Volume and Power buttons
[PATCH] clk: qcom: mmcc-msm8974: Add OXILICX_GDSC for msm8226
2023-05-26 19:41 UTC (5+ messages)
[PATCH v2] soc: qcom: ocmem: Add OCMEM hardware version print
2023-05-26 19:39 UTC (2+ messages)
[PATCH 0/2] Add few device nodes for IPQ9574 SoC
2023-05-26 19:38 UTC (2+ messages)
` (subset) "
[PATCH V5 0/3] Add regulator support for IPQ9574 SoC
2023-05-26 19:38 UTC (2+ messages)
[PATCH V4 0/5] Add regulator support for IPQ9574 SoC
2023-05-26 19:38 UTC (2+ messages)
` (subset) "
[PATCH V3 0/6] Incremental patches on minimal boot support
2023-05-26 19:38 UTC (2+ messages)
` (subset) "
[PATCH V3 0/5] Add APSS clock controller support for IPQ9574
2023-05-26 19:38 UTC (2+ messages)
` (subset) "
[PATCH 0/2] Make SID for PM7250B configurable (and a small fixup)
2023-05-26 19:38 UTC (2+ messages)
[PATCH 0/2] Add initial support for RDP418 of IPQ9574 family
2023-05-26 19:38 UTC (2+ messages)
[PATCH 0/2] Add initial support for RDP449 of IPQ9574 family
2023-05-26 19:38 UTC (2+ messages)
[PATCH 0/9] drm/panel and i2c-hid: Allow panels and touchscreens to power sequence together
2023-05-26 19:29 UTC (2+ messages)
[PATCH v3] arm64: dts: qcom: sm6115: Add EUD dt node and dwc3 connector
2023-05-26 19:27 UTC (3+ messages)
[PATCH v4 0/3] Enable IPQ9574 TSENS support
2023-05-26 19:30 UTC (3+ messages)
` [PATCH v4 2/3] arm64: dts: qcom: ipq9574: add tsens node
[PATCH v4 0/8] Add minimal boot support for IPQ5018
2023-05-26 19:17 UTC (2+ messages)
` [PATCH v4 2/8] clk: qcom: Add Global Clock controller (GCC) driver "
[PATCH v4 1/5] soc: qcom: socinfo: move SMEM item struct and defines to a header
2023-05-26 19:04 UTC (3+ messages)
` [PATCH v4 3/5] soc: qcom: smem: introduce qcom_smem_get_soc_id()
[PATCH 0/3] Add QFPROM support for few IPQ SoCs
2023-05-26 18:35 UTC (11+ messages)
` [PATCH 1/4] dt-bindings: nvmem: qfprom: add compatible "
` [PATCH 2/4] arm64: dts: qcom: ipq5332: add QFPROM node
` [PATCH 4/4] arm64: dts: qcom: ipq9574: "
[PATCH v7 00/11] arm64: qcom: Enable Crypto Engine for a few Qualcomm SoCs
2023-05-26 18:05 UTC (4+ messages)
` [PATCH v7 07/11] arm64: dts: qcom: sm6115: Add Crypto Engine support
[PATCH v2 0/6] drm/msm/dpu: rework interrupt handling
2023-05-26 18:03 UTC (7+ messages)
` [PATCH v2 3/6] drm/msm/dpu: split interrupt address arrays
` [Freedreno] "
[PATCH 0/5] mtd: rawnand: qcom: Implement exec_op()
2023-05-26 17:27 UTC (5+ messages)
` [PATCH v2 2/5] mtd: rawnand: qcom: Add support for reset, readid, status exec_op
[PATCH V4 0/4] Enable crypto for ipq9574
2023-05-26 16:11 UTC (5+ messages)
` [PATCH V4 1/4] dt-bindings: clock: Add crypto clock and reset definitions
` [PATCH V4 2/4] clk: qcom: gcc-ipq9574: Enable crypto clocks
` [PATCH V4 3/4] dt-bindings: qcom-qce: add SoC compatible string for ipq9574
` [PATCH V4 4/4] arm64: dts: qcom: ipq9574: Enable crypto nodes
[PATCH] arm64: dts: qcom: ipq6018: correct the qrng node name
2023-05-26 16:11 UTC
[PATCH V2 0/6] Add camera clock controller support for SM8550
2023-05-26 15:57 UTC (10+ messages)
` [PATCH V2 1/6] dt-bindings: clock: qcom: Add SM8550 camera clock controller
` [PATCH V2 2/6] clk: qcom: Update l value configuration for lucid ole and evo plls
` [PATCH V2 3/6] clk: qcom: clk-alpha-pll: Remove explicit CAL_L configuration for EVO PLL
[PATCHv4] media: venus: provide ctx queue lock for ioctl synchronization
2023-05-26 15:40 UTC (3+ messages)
[PATCH v1 0/3] Add support for a streaming interface for TMC ETR
2023-05-26 15:35 UTC (4+ messages)
` [PATCH v1 1/3] Coresight: Add driver to support for CSR
` [PATCH v1 2/3] coresight-tmc: byte-cntr: Add support for streaming interface for ETR
` [PATCH v1 3/3] dt-bindings: arm: Adds CoreSight CSR hardware definitions
[PATCH v8 0/9] Add multiport support for DWC3 controllers
2023-05-26 15:25 UTC (5+ messages)
` [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
[PATCH 0/4] Improve some Adreno Device Tree nodes
2023-05-26 13:51 UTC (6+ messages)
` [PATCH 3/4] arm64: dts: qcom: msm8996: Improve GPU OPP table
[PATCH v1 0/5] dts: qcom: sa8775p: add missing qup id's, i2c,
2023-05-26 13:31 UTC (6+ messages)
` [PATCH v1 1/5] arm64: dts: qcom: sa8775p: add the QUPv3 #0 and #3 node
` [PATCH v1 2/5] arm64: dts: qcom: sa8775p: add missing i2c nodes
` [PATCH v1 3/5] arm64: dts: qcom: sa8775p: add missing spi nodes
` [PATCH v1 4/5] arm64: dts: qcom: sa8775p: add uart5 and uart9 nodes
` [PATCH v1 5/5] arm64: dts: qcom: sa8775p-ride: enable i2c11
[PATCH v2 0/2] usb: typec: mux: Remove the "svid" device property checks
2023-05-26 13:14 UTC (3+ messages)
` [PATCH v2 1/2] usb: typec: mux: Clean up mux_fwnode_match()
` [PATCH v2 2/2] usb: typec: mux: Remove alt mode parameters from the API
[PATCH v4 12/13] drm/fbdev-generic: Implement dedicated fbdev I/O helpers
2023-05-26 12:44 UTC (3+ messages)
` [v4,12/13] "
[PATCH v4 02/13] fbdev: Add initializer macros for struct fb_ops
2023-05-26 12:38 UTC (3+ messages)
` [v4,02/13] "
[PATCH v2 0/6] clk: qcom: sc8280xp: add lpasscc reset control
2023-05-26 12:17 UTC (13+ messages)
` [PATCH v2 1/6] dt-bindings: clock: Add YAML schemas for LPASSCC and reset on SC8280XP
` [PATCH v2 2/6] dt-bindings: clock: Add YAML schemas for LPASS AUDIOCC "
` [PATCH v2 3/6] clk: qcom: Add lpass clock controller driver for SC8280XP
` [PATCH v2 4/6] clk: qcom: Add lpass audio "
` [PATCH v2 5/6] arm64: dts: qcom: sc8280xp: add resets for soundwire controllers
` [PATCH v2 6/6] arm64: defconfig: Enable sc828x0xp lpasscc clock controller
[PATCH v2] drm/msm/dpu: clean up dpu_kms_get_clk_rate() returns
2023-05-26 11:51 UTC
[PATCH v6 0/8] Add SC7280 audioreach device tree nodes
2023-05-26 11:32 UTC (9+ messages)
` [PATCH v6 1/8] arm64: dts: qcom: sc7280: Modify lpasscc node name
` [PATCH v6 2/8] dt-bindings: remoteproc: qcom: sc7280-adsp-pil: Add missing properties
` [PATCH v6 3/8] arm64: dts: qcom: sc7280: Extract audio nodes from common idp dtsi file
` [PATCH v6 4/8] arm64: dts: qcom: sc7280: Add sound node for crd-rev3 board
` [PATCH v6 5/8] arm64: dts: qcom: sc7280: Add LPASS PIL node
` [PATCH v6 6/8] arm64: dts: qcom: sc7280: Modify VA/RX/TX macro clock nodes for audioreach solution
` [PATCH v6 7/8] arm64: dts: qcom: sc7280: Modify LPASS_MCC reg region size in the lpass_tlmm node
` [PATCH v6 8/8] arm64: dts: qcom: sc7280: Add qcom,adsp-pil-mode property in clock nodes
[PATCH 0/4] Support HDMI CEC on Qualcomm SoCs
2023-05-26 10:48 UTC (5+ messages)
` [PATCH 2/4] drm/msm: add hdmi cec support
[PATCH v2 0/4] video: backlight: lp855x: modernize bindings
2023-05-26 10:39 UTC (9+ messages)
` [PATCH v2 1/4] dt-bindings: backlight: lp855x: convert to YAML and modernize
` [PATCH v2 2/4] video: backlight: lp855x: get PWM for PWM mode during probe
` [PATCH v2 3/4] ARM: dts: adapt to LP855X bindings changes
` [PATCH v2 4/4] arm64: "
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox