messages from 2023-08-26 10:04:17 to 2023-08-27 21:27:53 UTC [more...]
[PATCH v6 0/3] firmware: Add support for Qualcomm UEFI Secure Application
2023-08-27 21:26 UTC (5+ messages)
` [PATCH v6 1/3] lib/ucs2_string: Add UCS-2 strscpy function
` [PATCH v6 2/3] firmware: qcom_scm: Add support for Qualcomm Secure Execution Environment SCM interface
` [PATCH v6 3/3] firmware: Add support for Qualcomm UEFI Secure Application
[PATCH v4 00/38] ARM: dts: qcom: cleanup PMIC usage
2023-08-27 18:05 UTC (46+ messages)
` [PATCH v4 01/38] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
` [PATCH v4 02/38] dt-bindings: mfd: qcom-pm8xxx: add missing child nodes
` [PATCH v4 03/38] dt-bindings: mfd: qcom-pm8xxx: allow using interrupts-extended
` [PATCH v4 04/38] ARM: dts: qcom: apq8064: correct XOADC register address
` [PATCH v4 05/38] ARM: dts: qcom: msm8960: introduce label for PMIC keypad
` [PATCH v4 06/38] ARM: dts: qcom: msm8660-surf: use keypad label directly
` [PATCH v4 07/38] ARM: dts: qcom: apq8064-nexus7: move sdcc1 node to proper place
` [PATCH v4 08/38] ARM: dts: qcom: mdm9615-wp8548-mangoh-green: group include clauses
` [PATCH v4 09/38] ARM: dts: qcom: strip prefix from PMIC files
` [PATCH v4 10/38] ARM: dts: qcom: apq8064: fix PMIC node labels
` [PATCH v4 11/38] ARM: dts: qcom: mdm9615: "
` [PATCH v4 12/38] ARM: dts: qcom: msm8660: "
` [PATCH v4 13/38] ARM: dts: qcom: msm8960: "
` [PATCH v4 14/38] ARM: dts: qcom: apq8064: move PMIC interrupts to the board files
` [PATCH v4 15/38] ARM: dts: qcom: mdm9615: "
` [PATCH v4 16/38] ARM: dts: qcom: msm8660: "
` [PATCH v4 17/38] ARM: dts: qcom: msm8960: "
` [PATCH v4 18/38] ARM: dts: qcom: msm8960: split PMIC to separate dtsi files
` [PATCH v4 19/38] ARM: dts: qcom: apq8064: split PMICs "
` [PATCH v4 20/38] ARM: dts: qcom: mdm9615: split PMIC "
` [PATCH v4 21/38] ARM: dts: qcom: msm8660: "
` [PATCH v4 22/38] ARM: dts: qcom: pm8058: reorder nodes
` [PATCH v4 23/38] ARM: dts: qcom: pm8921: "
` [PATCH v4 24/38] ARM: dts: qcom: pm8018: move reg property
` [PATCH v4 25/38] ARM: dts: qcom: pm8921: "
` [PATCH v4 26/38] ARM: dts: qcom: pm8058: use defined IRQ flags
` [PATCH v4 27/38] ARM: dts: qcom: pm8921: switch to interrupts-extended
` [PATCH v4 28/38] ARM: dts: qcom: pm8018: "
` [PATCH v4 29/38] ARM: dts: qcom: pm8058: "
` [PATCH v4 30/38] ARM: dts: qcom: apq8064: move RPM regulators to board files
` [PATCH v4 31/38] ARM: dts: qcom: mdm9615: "
` [PATCH v4 32/38] ARM: dts: qcom: msm8660: "
` [PATCH v4 33/38] ARM: dts: qcom: msm8960: drop useless rpm regulators node
` [PATCH v4 34/38] ARM: dts: qcom: msm8974: move regulators to board files
` [PATCH v4 35/38] ARM: dts: qcom: pm8921: Disable keypad by default
` [PATCH v4 36/38] ARM: dts: qcom: apq8060-dragonboard: rename mpp ADC channels to adc-channel
` [PATCH v4 37/38] ARM: dts: qcom: ipq8064: drop qcom, prefix from SSBI node name
` [PATCH v4 38/38] ARM: dts: qcom: mdm9615: "
[PATCH] dt-bindings: PCI: qcom: fix SDX65 compatible
2023-08-27 16:52 UTC (3+ messages)
[PATCH v3 0/1] Add add-maintainer.py script
2023-08-27 16:44 UTC (3+ messages)
` [PATCH v3 1/1] scripts: Add add-maintainer.py
[PATCH v5 00/37] ARM: dts: qcom: cleanup PMIC usage
2023-08-27 13:25 UTC (38+ messages)
` [PATCH v5 01/37] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
` [PATCH v5 02/37] dt-bindings: mfd: qcom-pm8xxx: add missing child nodes
` [PATCH v5 03/37] ARM: dts: qcom: apq8064: correct XOADC register address
` [PATCH v5 04/37] ARM: dts: qcom: msm8960: introduce label for PMIC keypad
` [PATCH v5 05/37] ARM: dts: qcom: msm8660-surf: use keypad label directly
` [PATCH v5 06/37] ARM: dts: qcom: apq8064-nexus7: move sdcc1 node to proper place
` [PATCH v5 07/37] ARM: dts: qcom: mdm9615-wp8548-mangoh-green: group include clauses
` [PATCH v5 08/37] ARM: dts: qcom: strip prefix from PMIC files
` [PATCH v5 09/37] ARM: dts: qcom: apq8064: fix PMIC node labels
` [PATCH v5 10/37] ARM: dts: qcom: mdm9615: "
` [PATCH v5 11/37] ARM: dts: qcom: msm8660: "
` [PATCH v5 12/37] ARM: dts: qcom: msm8960: "
` [PATCH v5 13/37] ARM: dts: qcom: apq8064: move PMIC interrupts to the board files
` [PATCH v5 14/37] ARM: dts: qcom: mdm9615: "
` [PATCH v5 15/37] ARM: dts: qcom: msm8660: "
` [PATCH v5 16/37] ARM: dts: qcom: msm8960: "
` [PATCH v5 17/37] ARM: dts: qcom: msm8960: split PMIC to separate dtsi files
` [PATCH v5 18/37] ARM: dts: qcom: apq8064: split PMICs "
` [PATCH v5 19/37] ARM: dts: qcom: mdm9615: split PMIC "
` [PATCH v5 20/37] ARM: dts: qcom: msm8660: "
` [PATCH v5 21/37] ARM: dts: qcom: pm8058: reorder nodes
` [PATCH v5 22/37] ARM: dts: qcom: pm8921: "
` [PATCH v5 23/37] ARM: dts: qcom: pm8018: move reg property
` [PATCH v5 24/37] ARM: dts: qcom: pm8921: "
` [PATCH v5 25/37] ARM: dts: qcom: pm8058: use defined IRQ flags
` [PATCH v5 26/37] ARM: dts: qcom: pm8921: switch to interrupts-extended
` [PATCH v5 27/37] ARM: dts: qcom: pm8018: "
` [PATCH v5 28/37] ARM: dts: qcom: pm8058: "
` [PATCH v5 29/37] ARM: dts: qcom: apq8064: move RPM regulators to board files
` [PATCH v5 30/37] ARM: dts: qcom: mdm9615: "
` [PATCH v5 31/37] ARM: dts: qcom: msm8660: "
` [PATCH v5 32/37] ARM: dts: qcom: msm8960: drop useless rpm regulators node
` [PATCH v5 33/37] ARM: dts: qcom: msm8974: move regulators to board files
` [PATCH v5 34/37] ARM: dts: qcom: pm8921: Disable keypad by default
` [PATCH v5 35/37] ARM: dts: qcom: apq8060-dragonboard: rename mpp ADC channels to adc-channel
` [PATCH v5 36/37] ARM: dts: qcom: ipq8064: drop qcom, prefix from SSBI node name
` [PATCH v5 37/37] ARM: dts: qcom: mdm9615: "
[PATCH 1/3] ARM: dts: qcom: drop incorrect cell-index from SPMI
2023-08-27 12:28 UTC (3+ messages)
` [PATCH 2/3] arm64: dts: qcom: sc8180x: "
` [PATCH 3/3] arm64: dts: qcom: sm7225-fp4: Revert "arm64: dts: qcom: sm7225-fairphone-fp4: Add AW8695 haptics"
[PATCH] ARM: dts: qcom: sdx65: correct SPMI node name
2023-08-27 12:14 UTC
[PATCH v3 00/11] mailbox/arm64/ qcom: rework compatibles for fallback
2023-08-27 12:17 UTC (4+ messages)
[PATCH v4 00/23] ARM: qcom: apq8064: support CPU frequency scaling
2023-08-27 11:50 UTC (24+ messages)
` [PATCH v4 01/23] dt-bindings: soc: qcom: merge qcom,saw2.txt into qcom,spm.yaml
` [PATCH v4 02/23] dt-bindings: soc: qcom: qcom,saw2: define optional regulator node
` [PATCH v4 03/23] dt-bindings: clock: qcom,krait-cc: Krait core clock controller
` [PATCH v4 04/23] dt-bindings: cache: describe L2 cache on Qualcomm Krait platforms
` [PATCH v4 05/23] interconnect: icc-clk: add support for scaling using OPP
` [PATCH v4 06/23] clk: qcom: krait-cc: rewrite driver to use clk_hw instead of clk
` [PATCH v4 07/23] soc: qcom: spm: add support for voltage regulator
` [PATCH v4 08/23] soc: qcom: Add driver for Qualcomm Krait L2 cache scaling
` [PATCH v4 09/23] ARM: dts: qcom: apq8064-asus-nexus7-flo: constraint cpufreq regulators
` [PATCH v4 10/23] ARM: dts: qcom: apq8064-cm-qs600: "
` [PATCH v4 11/23] ARM: dts: qcom: apq8064-ifc6410: "
` [PATCH v4 12/23] ARM: dts: qcom: apq8064-sony-xperia-lagan-yuga: "
` [PATCH v4 13/23] ARM: dts: qcom: apq8064: rename SAW nodes to power-manager
` [PATCH v4 14/23] ARM: dts: qcom: apq8064: declare SAW2 regulators
` [PATCH v4 15/23] ARM: dts: qcom: apq8064: add Krait clock controller
` [PATCH v4 16/23] ARM: dts: qcom: apq8064: add L2 cache scaling
` [PATCH v4 17/23] ARM: dts: qcom: apq8064: add simple CPUFreq support
` [PATCH v4 18/23] ARM: dts: qcom: apq8064: enable passive CPU cooling
` [PATCH v4 19/23] ARM: dts: qcom: msm8960: declare SAW2 regulators
` [PATCH v4 20/23] ARM: dts: qcom: apq8084: drop 'regulator' property from SAW2 device
` [PATCH v4 21/23] ARM: dts: qcom: msm8974: "
` [PATCH v4 22/23] ARM: dts: qcom: ipq4019: drop 'regulator' property from SAW2 devices
` [PATCH v4 23/23] ARM: dts: qcom: ipq8064: "
[PATCH 1/2] ARM: dts: qcom: sdx65: correct PCIe EP phy-names
2023-08-27 11:45 UTC (2+ messages)
` [PATCH 2/2] ARM: dts: qcom: sdx65: add missing GCC clocks
[PATCH] dt-bindings: interconnect: qcom,rpmh: do not require reg on SDX65 MC virt
2023-08-27 11:40 UTC
[PATCH v4 0/2] arm64: dts: qcom: msm8939-longcheer-l9100: Add initial dts
2023-08-27 8:48 UTC (3+ messages)
` [PATCH v4 1/2] dt-bindings: arm: qcom: Add BQ Aquaris M5
` [PATCH v4 2/2] arm64: dts: qcom: msm8939-longcheer-l9100: Add initial device tree
[PATCH v2 0/1] Add add-maintainer.py script
2023-08-27 5:52 UTC (7+ messages)
` [PATCH v2 1/1] scripts: Add add-maintainer.py
[PATCH v4 0/6] cpufreq: qcom-nvmem: support apq8064 cpufreq scaling
2023-08-27 3:28 UTC (7+ messages)
` [PATCH v4 1/6] dt-bindings: opp: opp-v2-kryo-cpu: support Qualcomm Krait SoCs
` [PATCH v4 2/6] cpufreq: qcom-nvmem: create L2 cache device
` [PATCH v4 3/6] cpufreq: qcom-nvmem: also accept operating-points-v2-krait-cpu
` [PATCH v4 4/6] cpufreq: qcom-nvmem: drop pvs_ver for format a fuses
` [PATCH v4 5/6] cpufreq: qcom-nvmem: provide separate configuration data for apq8064
` [PATCH v4 6/6] cpufreq: qcom-nvmem: enable core voltage scaling for MSM8960
[PATCH v2 0/5] arm64: dts: qcom: sdm845-mtp: misc improvements
2023-08-26 22:19 UTC (6+ messages)
` [PATCH v2 1/5] arm64: dts: qcom: sdm845-mtp: fix WiFi configuration
` [PATCH v2 2/5] arm64: dts: qcom: sdm845-mtp: specify wifi variant
` [PATCH v2 3/5] arm64: dts: qcom: sdm845-mtp: switch to mbn firmware
` [PATCH v2 4/5] arm64: dts: qcom: sdm845-mtp: enable Vol-/reset button
` [PATCH v2 5/5] arm64: dts: qcom: sdm845-mtp: enable PCIe support
[PATCH] PCI: epf-mhi: Really use "align" from EPF core
2023-08-26 15:34 UTC (2+ messages)
[PATCH v2 2/7] PCI: epf-mhi: Make use of the alignment restriction from EPF core
2023-08-26 14:46 UTC (3+ messages)
[PATCH] usb: misc: eud: Fix missing IRQ check in eud_probe()
2023-08-26 14:17 UTC (3+ messages)
[PATCH 0/3] SM6115 LPASSCC
2023-08-26 14:29 UTC (5+ messages)
` [PATCH 3/3] clk: qcom: Add "
[PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage
2023-08-26 14:03 UTC (15+ messages)
` [PATCH v3 16/32] ARM: dts: qcom: mdm9615: split PMIC to separate dtsi files
` [PATCH v3 17/32] ARM: dts: qcom: msm8660: "
` [PATCH v3 19/32] ARM: dts: qcom: pm8921: reorder nodes
` [PATCH v3 31/32] ARM: dts: qcom: pm8921: Disable keypad by default
` [PATCH v3 32/32] ARM: dts: qcom: apq8060-dragonboard: rename mpp ADC channels to adc-channel
[PATCH 1/5] arm64: dts: qcom: sdm845-mtp: fix WiFi configuration
2023-08-26 14:01 UTC (5+ messages)
` [PATCH 3/5] arm64: dts: qcom: sdm845-mtp: switch to mbn firmware
[PATCH] wifi: ath10k: Default to board.bin for legacy board data file
2023-08-26 13:56 UTC (3+ messages)
[PATCH 0/6] SM8350 and SC8280XP venus support
2023-08-26 13:47 UTC (6+ messages)
` [PATCH 4/6] media: platform: venus: Add optional LLCC path
[PATCH v3 00/15] media: qcom: camss: Add parameter passing to remove several outstanding bugs
2023-08-26 12:48 UTC (30+ messages)
` [PATCH v3 07/15] media: qcom: camss: Capture VFE CSID dependency in a helper function
` [PATCH v3 08/15] media: qcom: camss: Untangle if/else spaghetti in camss
` [PATCH v3 09/15] media: qcom: camss: Improve error printout on icc_get fail
` [PATCH v3 10/15] media: qcom: camss: Allow clocks vfeN vfe_liteN or vfe_lite
` [PATCH v3 11/15] media: qcom: camss: Functionally decompose CSIPHY clock lookups
` [PATCH v3 12/15] media: qcom: camss: Fix support for setting CSIPHY clock name csiphyX
` [PATCH v3 14/15] media: qcom: camss: Convert vfe_disable() from int to void
` [PATCH v3 15/15] media: qcom: camss: Comment CSID dt_id field
[PATCH] arm64: dts: qcom: msm8916/39-samsung-a2015: Add flash LED
2023-08-26 12:09 UTC (4+ messages)
[PATCH RESEND v3 0/2] arm64: dts: qcom: msm8939-longcheer-l9100: Add initial dts
2023-08-26 12:06 UTC (3+ messages)
` [PATCH RESEND v3 2/2] arm64: dts: qcom: msm8939-longcheer-l9100: Add initial device tree
[PATCH v2 0/3] arm64: dts: qcom: msm8916-samsung-fortuna: Add initial device trees
2023-08-26 12:03 UTC (5+ messages)
` [PATCH v2 2/3] "
` [PATCH v2 3/3] ARM: dts: qcom-msm8916-samsung-fortuna: Include dts from arm64
[PATCH 00/11] Clean up RPM bus clocks remnants
2023-08-26 11:55 UTC (4+ messages)
` [PATCH 04/11] arm64: dts: qcom: sdm630: Drop RPM bus clocks
[PATCH] arm64: dts: qcom: sdm630: remove refs to nonexistent clocks
2023-08-26 11:54 UTC (6+ messages)
[PATCH] thermal/drivers/qcom/lmh: Fix missing IRQ check in lmh_probe()
2023-08-26 11:09 UTC
[PATCH v9 0/7] Add Qualcomm PMIC TPCM support
2023-08-26 10:56 UTC (7+ messages)
` [PATCH v9 3/7] arm64: dts: qcom: pm8150b: Add a TCPM description
` [PATCH v9 6/7] arm64: dts: qcom: qrb5165-rb5: Switch on TCPM usb-role-switching for usb_1
` [PATCH v9 7/7] arm64: dts: qcom: qrb5165-rb5: Switch on TCPM orientation-switch for usb_1_qmpphy
[PATCH v2 0/6] PM: domains: Add control for switching back and forth to HW control
2023-08-26 10:47 UTC (5+ messages)
` [PATCH v2 4/6] clk: qcom: Use HW_CTRL_TRIGGER flag to switch video GDSC to HW mode
[PATCH 0/3] Add display panels to gt5 devices
2023-08-26 10:30 UTC (5+ messages)
` [PATCH 1/3] arm64: dts: qcom: msm8916-samsung-gt510: Add display panel
` [PATCH 2/3] arm64: dts: qcom: msm8916-samsung-gt58: "
[PATCH] arm64: dts: qcom: qru1000-idp: add SDHCI for emmc
2023-08-26 10:26 UTC (2+ messages)
[PATCH v3] irqchip/qcom-pdc: add support for v3.2 HW
2023-08-26 10:09 UTC (3+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox