messages from 2023-10-10 17:53:17 to 2023-10-11 18:30:45 UTC [more...]
[PATCH v2 0/4] arm64: qcom: sa8775p: add support for EP PCIe
2023-10-11 18:30 UTC (10+ messages)
` [PATCH v2 1/4] dt-bindings: PCI: qcom-ep: Add support for SA8775P SoC
` [PATCH v2 2/4] phy: qcom-qmp-pcie: add endpoint support for sa8775p
` [PATCH v2 3/4] PCI: epf-mhi: Add support for SA8775P
` [PATCH v2 4/4] arm64: dts: qcom: sa8775p: Add ep pcie0 controller node
[PATCH 0/3] Add watchdog nodes to msm8226 & msm8974
2023-10-11 18:29 UTC (7+ messages)
` [PATCH 1/3] dt-bindings: watchdog: qcom-wdt: Add MSM8226 and MSM8974 compatibles
` [PATCH 2/3] ARM: dts: qcom: msm8226: Add watchdog node
` [PATCH 3/3] ARM: dts: qcom: msm8974: "
[PATCH 0/3] Add support for HTC One Mini 2 smartphone
2023-10-11 18:26 UTC (8+ messages)
` [PATCH 1/3] dt-bindings: vendor-prefixes: document HTC Corporation
` [PATCH 2/3] dt-bindings: arm: qcom: Add HTC One Mini 2
` [PATCH 3/3] ARM: dts: qcom: Add support for "
[PATCH v4 00/23] ARM: qcom: apq8064: support CPU frequency scaling
2023-10-11 18:19 UTC (4+ messages)
` [PATCH v4 08/23] soc: qcom: Add driver for Qualcomm Krait L2 cache scaling
[PATCH] iommu/qcom: restore IOMMU state if needed
2023-10-11 17:57 UTC
[PATCH v3 0/2] Initial support for the QCM6490 IDP
2023-10-11 17:35 UTC (7+ messages)
` [PATCH v3 2/2] arm64: dts: qcom: qcm6490: Add qcm6490 dts file
[PATCH v3 00/15] arm64: qcom: add and enable SHM Bridge support
2023-10-11 14:37 UTC (28+ messages)
` [PATCH v3 02/15] firmware: qcom: scm: add a missing forward declaration for struct device
` [PATCH v3 03/15] firmware: qcom: scm: remove unneeded 'extern' specifiers
` [PATCH v3 04/15] firmware: qcom: add a dedicated TrustZone buffer allocator
` [PATCH v3 06/15] firmware: qcom: scm: smc: switch to using the SCM allocator
` [PATCH v3 07/15] firmware: qcom: scm: make qcom_scm_assign_mem() use the TZ allocator
` [PATCH v3 08/15] firmware: qcom: scm: make qcom_scm_ice_set_key() "
` [PATCH v3 09/15] firmware: qcom: scm: make qcom_scm_lmh_dcvsh() "
` [PATCH v3 10/15] firmware: qcom: scm: make qcom_scm_qseecom_app_get_id() "
` [PATCH v3 11/15] firmware: qcom: qseecom: convert to using "
[PATCH v2 0/5] drm/msm/dpu: correctly implement SSPP & WB Clock Control Split
2023-10-11 13:15 UTC (11+ messages)
` [PATCH v2 1/5] drm/msm/dpu: create a dpu_hw_clk_force_ctrl() helper
` [PATCH v2 2/5] drm/msm/dpu: add setup_clk_force_ctrl() op to sspp & wb
` [PATCH v2 3/5] drm/msm/dpu: move setup_force_clk_ctrl handling into plane and wb
` [PATCH v2 4/5] drm/msm/dpu: sm8550: remove unused VIG and DMA clock controls entries
` [PATCH v2 5/5] drm/msm/dpu: enable writeback on SM8550
[PATCH v8 00/34] Introduce QC USB SND audio offloading support
2023-10-11 13:10 UTC (38+ messages)
` [PATCH v8 01/34] xhci: split free interrupter into separate remove and free parts
` [PATCH v8 02/34] xhci: add support to allocate several interrupters
` [PATCH v8 03/34] xhci: add helper to stop endpoint and wait for completion
` [PATCH v8 04/34] xhci: sideband: add initial api to register a sideband entity
` [PATCH v8 05/34] usb: host: xhci-mem: Cleanup pending secondary event ring events
` [PATCH v8 06/34] usb: host: xhci-mem: Allow for interrupter clients to choose specific index
` [PATCH v8 07/34] ASoC: Add SOC USB APIs for adding an USB backend
` [PATCH v8 08/34] ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port
` [PATCH v8 09/34] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp
` [PATCH v8 10/34] ASoC: qdsp6: q6afe: Increase APR timeout
` [PATCH v8 11/34] ASoC: qcom: qdsp6: Add USB backend ASoC driver for Q6
` [PATCH v8 12/34] ALSA: usb-audio: Introduce USB SND platform op callbacks
` [PATCH v8 13/34] ALSA: usb-audio: Export USB SND APIs for modules
` [PATCH v8 14/34] dt-bindings: usb: dwc3: Limit num-hc-interrupters definition
` [PATCH v8 15/34] dt-bindings: usb: xhci: Add "
` [PATCH v8 16/34] usb: dwc3: Specify maximum number of XHCI interrupters
` [PATCH v8 17/34] usb: host: xhci-plat: Set XHCI max interrupters if property is present
` [PATCH v8 18/34] ALSA: usb-audio: qcom: Add USB QMI definitions
` [PATCH v8 19/34] ALSA: usb-audio: qcom: Introduce QC USB SND offloading support
` [PATCH v8 20/34] ALSA: usb-audio: Check for support for requested audio format
` [PATCH v8 21/34] ASoC: usb: Add PCM format check API for USB backend
` [PATCH v8 22/34] ASoC: qcom: qdsp6: Ensure PCM format is supported by USB audio device
` [PATCH v8 23/34] ALSA: usb-audio: Prevent starting of audio stream if in use
` [PATCH v8 24/34] ASoC: dt-bindings: Add Q6USB backend
` [PATCH v8 25/34] ASoC: dt-bindings: Update example for enabling USB offload on SM8250
` [PATCH v8 26/34] ASoC: qcom: qdsp6: q6afe: Split USB AFE dev_token param into separate API
` [PATCH v8 27/34] ALSA: usb-audio: qcom: Populate PCM and USB chip information
` [PATCH v8 28/34] ASoC: qcom: qdsp6: Add support to track available USB PCM devices
` [PATCH v8 29/34] ASoC: qcom: qdsp6: Add SND kcontrol to select offload device
` [PATCH v8 30/34] ASoC: qcom: qdsp6: Add SND kcontrol for fetching offload status
` [PATCH v8 31/34] ASoC: qcom: qdsp6: Add headphone jack for offload connection status
` [PATCH v8 32/34] ALSA: usb-audio: qcom: Use card and PCM index from QMI request
` [PATCH v8 33/34] ALSA: usb-audio: Allow for rediscovery of connected USB SND devices
` [PATCH v8 34/34] ASoC: usb: Rediscover USB SND devices on USB port add
[PATCH v5 0/5] UFS: Add OPP support
2023-10-11 13:09 UTC (8+ messages)
` [PATCH v5 1/5] dt-bindings: ufs: common: add OPP table
` [PATCH v5 2/5] scsi: ufs: core: Add OPP support for scaling clocks and regulators
` [PATCH v5 3/5] scsi: ufs: host: Add support for parsing OPP
` [PATCH v5 4/5] arm64: dts: qcom: sdm845: Add OPP table support to UFSHC
` [PATCH v5 5/5] arm64: dts: qcom: sm8250: "
[PATCH] of: export of_find_next_cache_node() for modules
2023-10-11 12:59 UTC (4+ messages)
[PATCH] arm64: dts: qcom: pad sa8155p-adp DTB file
2023-10-11 12:56 UTC (2+ messages)
[PATCH v10 0/4] add clock controller of qca8386/qca8084
2023-10-11 12:54 UTC (5+ messages)
` [PATCH v10 1/4] clk: qcom: branch: Add clk_branch2_prepare_ops
` [PATCH v10 2/4] dt-bindings: clock: add qca8386/qca8084 clock and reset definitions
` [PATCH v10 3/4] clk: qcom: common: commonize qcom_cc_really_probe
` [PATCH v10 4/4] clk: qcom: add clock controller driver for qca8386/qca8084
[PATCH v9 0/4] add clock controller of qca8386/qca8084
2023-10-11 12:42 UTC (8+ messages)
` [PATCH v9 4/4] clk: qcom: add clock controller driver for qca8386/qca8084
[PATCH v1 0/5] arm64: qcom: sa8775p: add support for EP PCIe
2023-10-11 11:43 UTC (13+ messages)
` [PATCH v1 1/5] dt-bindings: PCI: qcom-ep: Add support for SA8775P SoC
` [PATCH v1 4/5] PCI: epf-mhi: Add support for SA8775P
` [PATCH v1 5/5] arm64: dts: qcom: sa8775p: Add ep pcie0 controller node
[PATCH 1/2] arm64: defconfig: enable CONFIG_TYPEC_QCOM_PMIC
2023-10-11 11:35 UTC (6+ messages)
` [PATCH 2/2] arm64: defconfig: enable DisplayPort altmode support
next: Build error on arm64: `modpost: "of_find_next_cache_node" [drivers/cpufreq/qcom-cpufreq-nvmem.ko] undefined!`
2023-10-11 11:27 UTC (3+ messages)
[PATCH] arm64: dts: qcom: pad generated DTB files
2023-10-11 11:16 UTC (3+ messages)
[PATCH] ARM: kprobes: Explicitly assign register for local variables
2023-10-11 10:32 UTC (8+ messages)
[PATCH v3 0/2] Add common RDP dtsi file for IPQ9574
2023-10-11 10:32 UTC (2+ messages)
[PATCH V2 0/4] Add support for Qualcomm ECPRI clock controller
2023-10-11 10:30 UTC (8+ messages)
` [PATCH V2 1/4] dt-bindings: clock: qcom: Add ECPRICC clocks for QDU1000 and QRU1000
` [PATCH V2 2/4] clk: qcom: branch: Add mem ops support for branch2 clocks
` [PATCH V2 3/4] clk: qcom: Add ECPRICC driver support for QDU1000 and QRU1000
` [PATCH V2 4/4] arm64: dts: qcom: qdu1000: Add ECPRI clock controller
Does the branch 6.1 6.2 6.3 and 6.4 still accept bug fix now
2023-10-11 10:17 UTC
[PATCH v9 3/4] clk: qcom: common: commonize qcom_cc_really_probe
2023-10-11 10:06 UTC (2+ messages)
[PATCH v10 00/54] Add DELETE_BUF ioctl
2023-10-11 9:36 UTC (14+ messages)
` [PATCH v10 01/54] media: videobuf2: Rework offset 'cookie' encoding pattern
` [PATCH v10 11/54] media: videobuf2: Access vb2_queue bufs array through helper functions
` [PATCH v10 13/54] media: Report the maximum possible number of buffers for the queue
` [PATCH v10 20/54] media: Remove duplicated index vs q->num_buffers check
` [PATCH v10 21/54] media: core: Add helper to get queue number of buffers
[PATCH v13 00/10] Add multiport support for DWC3 controllers
2023-10-11 9:34 UTC (4+ messages)
[PATCH] soc: qcom: pmic_glink: fix connector type to be DisplayPort
2023-10-11 8:34 UTC (3+ messages)
[PATCH V1 1/4] dt-bindings: ufs: qcom: Add qos property
2023-10-11 7:37 UTC (2+ messages)
[PATCH 0/5] Add sc8280xp CCI and CAMSS core dtsi
2023-10-11 6:28 UTC (5+ messages)
` [PATCH 1/5] dt-bindings: i2c: qcom-cci: Document sc8280xp compatible
[PATCH 1/3] dt-bindings: mfd: qcom,tcsr: Add compatible for sm8{2|3|5}50
2023-10-11 5:45 UTC (5+ messages)
[PATCH v5 1/4] cpufreq: qcom-nvmem: add support for IPQ8074
2023-10-11 5:25 UTC (15+ messages)
` [PATCH v5 3/4] cpufreq: qcom-nvmem: add support for IPQ8064
` [PATCH v5 4/4] ARM: dts: qcom: ipq8064: Add CPU OPP table
[PATCH v2 0/2] PCI: qcom: Enable ASPM on host bridge and devices
2023-10-11 5:03 UTC (6+ messages)
` [PATCH v2 2/2] PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops
[PATCH v5 RESEND 0/7] soc: qcom: Add uart console support for SM4450
2023-10-11 3:14 UTC (8+ messages)
` [PATCH v5 RESEND 1/7] dt-bindings: interrupt-controller: qcom,pdc: document qcom,sm4450-pdc
` [PATCH v5 RESEND 2/7] arm64: dts: qcom: sm4450: Add apps_rsc and cmd_db node
` [PATCH v5 RESEND 3/7] arm64: dts: qcom: sm4450: Add RPMH and Global clock
` [PATCH v5 RESEND 4/7] arm64: dts: qcom: add uart console support for SM4450
` [PATCH v5 RESEND 5/7] arm64: dts: qcom: sm4450-qrd: add QRD4450 uart support
` [PATCH v5 RESEND 6/7] arm64: dts: qcom: sm4450-qrd: mark QRD4450 reserved gpios
` [PATCH v5 RESEND 7/7] arm64: defconfig: enable clock controller and pinctrl
[PATCH v4 0/3 RESEND] drm: simplify support for transparent DRM bridges
2023-10-10 23:10 UTC (4+ messages)
` [PATCH v4 1/3] drm/bridge: add transparent bridge helper
` [PATCH v4 2/3] phy: qcom: qmp-combo: switch to DRM_AUX_BRIDGE
` [PATCH v4 3/3] usb: typec: nb7vpq904m: "
[PATCH] soc: qcom: add ADSP PDCharger ULOG driver
2023-10-10 22:45 UTC (2+ messages)
[PATCH v2] clk: qcom: smd: Disable unused clocks
2023-10-10 21:22 UTC (6+ messages)
[PATCH] clk: qcom: Replace of_device.h with explicit includes
2023-10-10 20:57 UTC
[PATCH v2] drm/panel: Enable DSC and CMD mode for Visionox VTDR6130 panel
2023-10-10 20:33 UTC (3+ messages)
[PATCH v3 0/6] SDM670 display subsystem support
2023-10-10 20:01 UTC (3+ messages)
` [PATCH v3 6/6] arm64: dts: qcom: sdm670: add display subsystem
[PATCH v7 0/7] incorporate pm runtime framework and eDP clean up
2023-10-10 19:19 UTC (2+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox