messages from 2023-10-12 10:06:14 to 2023-10-13 20:55:05 UTC [more...]
[PATCH 0/2] arm64: dts: qcom: longcheer l8910 and l9100: Enable RGB LED
2023-10-13 20:51 UTC (2+ messages)
` [PATCH 2/2] arm64: dts: qcom: msm8939-longcheer-l9100: "
[PATCH v5 RESEND 3/7] arm64: dts: qcom: sm4450: Add RPMH and Global clock
2023-10-13 18:58 UTC (2+ messages)
[PATCH v6 0/4] cpufreq: qcom-nvmem: add support for ipq806x
2023-10-13 17:38 UTC (5+ messages)
` [PATCH v6 1/4] dt-bindings: cpufreq: qcom-cpufreq-nvmem: Document krait-cpu
` [PATCH v6 2/4] dt-bindings: opp: opp-v2-kryo-cpu: Document named opp-microvolt property
` [PATCH v6 3/4] cpufreq: qcom-nvmem: add support for IPQ8064
` [PATCH v6 4/4] ARM: dts: qcom: ipq8064: Add CPU OPP table
[PATCH v6] cpufreq: qcom-nvmem: add support for IPQ8074
2023-10-13 17:25 UTC (2+ messages)
WARNING: possible circular locking dependency detected - clk_smd_rpm_set_rate (drivers/clk/qcom/clk-smd-rpm.c:321)
2023-10-13 17:11 UTC
[PATCH v3 1/2] dt-bindings: clocks: qcom,gcc-ipq8074: allow QMP PCI PHY PIPE clocks
2023-10-13 16:39 UTC (2+ messages)
` [PATCH v3 2/2] arm64: dts: qcom: ipq8074: pass QMP PCI PHY PIPE clocks to GCC
[PATCH v1 0/5] arm64: qcom: sa8775p: add support for EP PCIe
2023-10-13 16:38 UTC (11+ messages)
` [PATCH v1 1/5] dt-bindings: PCI: qcom-ep: Add support for SA8775P SoC
` [PATCH v1 2/5] "
[PATCH v4 00/15] arm64: qcom: add and enable SHM Bridge support
2023-10-13 16:32 UTC (22+ messages)
` [PATCH v4 01/15] firmware: qcom: move Qualcomm code into its own directory
` [PATCH v4 02/15] firmware: qcom: scm: add a missing forward declaration for struct device
` [PATCH v4 03/15] firmware: qcom: scm: remove unneeded 'extern' specifiers
` [PATCH v4 04/15] firmware: qcom: add a dedicated TrustZone buffer allocator
` [PATCH v4 05/15] firmware: qcom: scm: enable the TZ mem allocator
` [PATCH v4 06/15] firmware: qcom: scm: smc: switch to using the SCM allocator
` [PATCH v4 07/15] firmware: qcom: scm: make qcom_scm_assign_mem() use the TZ allocator
` [PATCH v4 08/15] firmware: qcom: scm: make qcom_scm_ice_set_key() "
` [PATCH v4 09/15] firmware: qcom: scm: make qcom_scm_lmh_dcvsh() "
` [PATCH v4 10/15] firmware: qcom: scm: make qcom_scm_qseecom_app_get_id() "
` [PATCH v4 11/15] firmware: qcom: qseecom: convert to using "
` [PATCH v4 12/15] firmware: qcom: scm: add support for SHM bridge operations
` [PATCH v4 13/15] firmware: qcom: tzmem: enable SHM Bridge support
` [PATCH v4 14/15] firmware: qcom: scm: clarify the comment in qcom_scm_pas_init_image()
` [PATCH v4 15/15] arm64: defconfig: enable SHM Bridge support for the TZ memory allocator
[PATCH v2 0/4] arm64: dts: qcom: qrb5165-rb5: enable DP support
2023-10-13 16:30 UTC (4+ messages)
` [PATCH v2 4/4] arm64: dts: qcom: qrb5165-rb5: enable DP altmode
` Warning notice "Memory manager not clean during takedown" on RB5 runs
[PATCH v4 0/4] Add sc8280xp CCI and CAMSS core dtsi
2023-10-13 15:56 UTC (8+ messages)
` [PATCH v4 1/4] arm64: dts: qcom: sc8280xp: Add in CAMCC for sc8280xp
` [PATCH v4 2/4] arm64: dts: qcom: sc8280xp: camss: Add CCI definitions
` [PATCH v4 3/4] media: dt-bindings: media: camss: Add qcom,sc8280xp-camss binding
` [PATCH v4 4/4] arm64: dts: qcom: sc8280xp: camss: Add CAMSS block definition
[PATCH v2 0/2] pinctrl: qcom: lpass-lpi: allow slew rate bit in main pin config register
2023-10-13 14:59 UTC (3+ messages)
` [PATCH v2 1/2] pinctrl: qcom: lpass-lpi: split slew rate set to separate function
` [PATCH v2 2/2] pinctrl: qcom: lpass-lpi: allow slew rate bit in main pin config register
[RESEND PATCH] pinctrl: qcom: lpass-lpi: fix concurrent register updates
2023-10-13 14:57 UTC
[PATCH 0/2] Add driver for NXP PTN36502 Type-C redriver
2023-10-13 14:24 UTC (3+ messages)
` [PATCH 1/2] dt-bindings: usb: add NXP PTN36502 Type-C redriver bindings
` [PATCH 2/2] usb: typec: add support for PTN36502 redriver
[PATCH v3 0/2] Initial support for the QCM6490 IDP
2023-10-13 14:13 UTC (10+ messages)
` [PATCH v3 2/2] arm64: dts: qcom: qcm6490: Add qcm6490 dts file
[PATCH v3 00/15] arm64: qcom: add and enable SHM Bridge support
2023-10-13 14:06 UTC (7+ messages)
` [PATCH v3 13/15] firmware: qcom: tzmem: "
[PATCH] soc: qcom: pmic_glink_altmode: Print error when retimer setup fails
2023-10-13 13:56 UTC
[PATCH] mfd: Use device_get_match_data()
2023-10-13 13:24 UTC (6+ messages)
[PATCH 0/3] Handle reversed SBU orientation for FSA4480
2023-10-13 12:39 UTC (5+ messages)
` [PATCH 1/3] dt-bindings: usb: fsa4480: Add data-lanes property to endpoint
` [PATCH 2/3] usb: typec: fsa4480: Add support to swap SBU orientation
` [PATCH 3/3] dt-bindings: usb: fsa4480: Add compatible for OCP96011
[PATCH v1] drm/msm/dp: do not reinitialize phy unless retry during link training
2023-10-13 12:06 UTC (3+ messages)
[PATCH] arm64: dts: qcom: msm8953: add SPI interfaces
2023-10-13 11:05 UTC
[PATCH] arm64: dts: qcom: msm8953: add SPI interfaces
2023-10-13 11:01 UTC
[PATCH v4 0/5] Add devicetree support for SDX75 Modem and IDP
2023-10-13 10:50 UTC (2+ messages)
[PATCH v4 0/5] Add USB Support on Qualcomm's SDX75 Platform
2023-10-13 10:47 UTC (5+ messages)
[PATCH v3 0/3] phy: qcom-qmp-combo: correct USB v6 registers
2023-10-13 10:43 UTC (2+ messages)
[PATCH v4 0/5] arm64: qcom: sm8x50: enable RNG
2023-10-13 10:36 UTC (4+ messages)
` [PATCH v4 3/5] crypto: qcom-rng - Add hw_random interface support
[PATCH 0/5] mfd: qcom-spmi-pmic: fix revid implementation
2023-10-13 10:15 UTC (4+ messages)
` (subset) "
[PATCH v2] drm/msm: remove unnecessary NULL check
2023-10-13 9:54 UTC (2+ messages)
[PATCH] bus: mhi: host: Add tracing support
2023-10-13 9:53 UTC (3+ messages)
[PATCH v2] bus: mhi: host: Add tracing support
2023-10-13 9:52 UTC
[PATCH 0/4] Add Fairphone 5 thermals (PMK7325, PM7250B, PM7325)
2023-10-13 9:09 UTC (8+ messages)
` [PATCH 1/4] iio: adc: Add PM7325 PMIC7 ADC bindings
` [PATCH 2/4] arm64: dts: qcom: qcm6490-fairphone-fp5: Add PM7250B thermals
` [PATCH 3/4] arm64: dts: qcom: qcm6490-fairphone-fp5: Add PMK7325 thermals
` [PATCH 4/4] arm64: dts: qcom: qcm6490-fairphone-fp5: Add PM7325 thermals
[PATCH] drm/msm: remove unnecessary NULL check
2023-10-13 8:26 UTC (3+ messages)
[PATCH v5 0/7] Add support for LUT PPG
2023-10-13 6:35 UTC (4+ messages)
[PATCH v3 11/15] firmware: qcom: qseecom: convert to using the TZ allocator
2023-10-12 23:21 UTC (2+ messages)
[PATCH v2 0/8] Enable cpufreq for IPQ5332 & IPQ9574
2023-10-12 20:55 UTC (5+ messages)
` [PATCH v2 1/8] clk: qcom: clk-alpha-pll: introduce stromer plus ops
` [PATCH v2 4/8] clk: qcom: apss-ipq6018: ipq5332: add safe source switch for a53pll
[PATCH V2 0/4] Add support for Qualcomm ECPRI clock controller
2023-10-12 20:24 UTC (5+ messages)
` [PATCH V2 2/4] clk: qcom: branch: Add mem ops support for branch2 clocks
` [PATCH V2 3/4] clk: qcom: Add ECPRICC driver support for QDU1000 and QRU1000
[PATCH 0/4] cpufreq: Add basic cpufreq scaling for Qualcomm MSM8909
2023-10-12 18:43 UTC (8+ messages)
` [PATCH 1/4] cpufreq: qcom-nvmem: Enable virtual power domain devices
[PATCH v8 00/34] Introduce QC USB SND audio offloading support
2023-10-12 18:17 UTC (3+ messages)
` [PATCH v8 16/34] usb: dwc3: Specify maximum number of XHCI interrupters
[PATCH v13 00/10] Add multiport support for DWC3 controllers
2023-10-12 17:26 UTC (10+ messages)
` [PATCH v13 03/10] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
` [PATCH v13 08/10] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280
` [PATCH v13 09/10] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports
` [PATCH v13 10/10] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller
[PATCH v7 0/5] UFS: Add OPP support
2023-10-12 17:21 UTC (6+ messages)
` [PATCH v7 1/5] dt-bindings: ufs: common: add OPP table
` [PATCH v7 2/5] scsi: ufs: core: Add OPP support for scaling clocks and regulators
` [PATCH v7 3/5] scsi: ufs: host: Add support for parsing OPP
` [PATCH v7 4/5] arm64: dts: qcom: sdm845: Add OPP table support to UFSHC
` [PATCH v7 5/5] arm64: dts: qcom: sm8250: "
[PATCH v4 0/3] Add devicetree support of Interconnects and USB for SDX75
2023-10-12 16:59 UTC (5+ messages)
` [PATCH v4 1/3] arm64: dts: qcom: Add interconnect nodes "
[PATCH v5 1/4] cpufreq: qcom-nvmem: add support for IPQ8074
2023-10-12 16:45 UTC (5+ messages)
` [PATCH v5 4/4] ARM: dts: qcom: ipq8064: Add CPU OPP table
[PATCH v2 0/4] arm64: qcom: sm8550: retrieve USB-C port orientation from gpio
2023-10-12 16:48 UTC (4+ messages)
` [PATCH v2 1/4] dt-bindings: soc: qcom: qcom,pmic-glink: add a gpio used to determine the Type-C port plug orientation
[PATCH] arm64: dts: qcom: pad sa8155p-adp DTB file
2023-10-12 16:43 UTC (3+ messages)
linux-next: Tree for Oct 12 (drivers/gpu/drm/msm/adreno/a6xx_gmu.o)
2023-10-12 16:14 UTC
[PATCH] media: qcom: camss: clean up a check
2023-10-12 16:13 UTC (2+ messages)
[PATCH v2] soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset
2023-10-12 16:05 UTC
[PATCH 2/5] pmdomain: qcom: cpr: Drop the ->opp_to_performance_state() callback
2023-10-12 15:36 UTC (3+ messages)
` [PATCH 3/5] pmdomain: qcom: rpmpd: "
` [PATCH 4/5] pmdomain: qcom: rpmhpd: "
[PATCH v3 0/6] SDM670 display subsystem support
2023-10-12 15:15 UTC (3+ messages)
` [PATCH v3 3/6] dt-bindings: display: msm: Add SDM670 MDSS
[PATCH V1 0/4] Add per-cpu PM QoS support for QCOM UFS
2023-10-12 12:54 UTC (3+ messages)
` [PATCH V1 1/4] dt-bindings: ufs: qcom: Add qos property
[PATCH v11 00/56] Add DELETE_BUF ioctl
2023-10-12 12:10 UTC (59+ messages)
` [PATCH v11 01/56] media: videobuf2: Rename offset parameter
` [PATCH v11 02/56] media: videobuf2: Rework offset 'cookie' encoding pattern
` [PATCH v11 03/56] media: videobuf2: Stop spamming kernel log with all queue counter
` [PATCH v11 04/56] media: videobuf2: Use vb2_buffer instead of index
` [PATCH v11 05/56] media: videobuf2: Access vb2_queue bufs array through helper functions
` [PATCH v11 06/56] media: videobuf2: Remove duplicated index vs q->num_buffers check
` [PATCH v11 07/56] media: videobuf2: Add helper to get queue number of buffers
` [PATCH v11 08/56] media: videobuf2: Use vb2_get_num_buffers() helper
` [PATCH v11 09/56] media: amphion: Use vb2_get_buffer() instead of directly access to buffers array
` [PATCH v11 10/56] media: amphion: Stop direct calls to queue num_buffers field
` [PATCH v11 11/56] media: mediatek: jpeg: Use vb2_get_buffer() instead of directly access to buffers array
` [PATCH v11 12/56] media: mediatek: vdec: Remove useless loop
` [PATCH v11 13/56] media: mediatek: vcodec: Stop direct calls to queue num_buffers field
` [PATCH v11 14/56] media: sti: hva: Use vb2_get_buffer() instead of directly access to buffers array
` [PATCH v11 15/56] media: visl: "
` [PATCH v11 16/56] media: atomisp: "
` [PATCH v11 17/56] media: atomisp: Stop direct calls to queue num_buffers field
` [PATCH v11 18/56] media: dvb-core: Use vb2_get_buffer() instead of directly access to buffers array
` [PATCH v11 19/56] media: dvb-core: Do not initialize twice queue num_buffer field
` [PATCH v11 20/56] media: dvb-frontends: rtl2832_srd: Use queue min_buffers_needed field
` [PATCH v11 21/56] media: video-i2c: Set min_buffers_needed to 2
` [PATCH v11 22/56] media: pci: cx18: Set correct value to min_buffers_needed field
` [PATCH v11 23/56] media: pci: dt3155: Remove useless check
` [PATCH v11 24/56] media: pci: netup_unidvb: Remove useless number of buffers check
` [PATCH v11 25/56] media: pci: tw68: Stop direct calls to queue num_buffers field
` [PATCH v11 26/56] media: pci: tw686x: Set min_buffers_needed to 3
` [PATCH v11 27/56] media: coda: Stop direct calls to queue num_buffers field
` [PATCH v11 28/56] media: nxp: "
` [PATCH v11 29/56] media: renesas: Set min_buffers_needed to 16
` [PATCH v11 30/56] media: ti: Use queue min_buffers_needed field to set the min number of buffers
` [PATCH v11 31/56] media: verisilicon: Stop direct calls to queue num_buffers field
` [PATCH v11 32/56] media: test-drivers: "
` [PATCH v11 33/56] media: usb: airspy: Set min_buffers_needed to 8
` [PATCH v11 34/56] media: usb: cx231xx: Set min_buffers_needed to CX231XX_MIN_BUF
` [PATCH v11 35/56] media: usb: hackrf: Set min_buffers_needed to 8
` [PATCH v11 36/56] media: usb: usbtv: Set min_buffers_needed to 2
` [PATCH v11 37/56] media: imx: Stop direct calls to queue num_buffers field
` [PATCH v11 38/56] media: meson: vdec: "
` [PATCH v11 39/56] touchscreen: sur40: "
` [PATCH v11 40/56] sample: v4l: "
` [PATCH v11 41/56] media: cedrus: "
` [PATCH v11 42/56] media: nuvoton: "
` [PATCH v11 43/56] media: videobuf2: Be more flexible on the number of queue stored buffers
` [PATCH v11 44/56] media: core: Report the maximum possible number of buffers for the queue
` [PATCH v11 45/56] media: test-drivers: vivid: Increase max supported buffers for capture queues
` [PATCH v11 46/56] media: test-drivers: vicodec: Increase max supported capture queue buffers
` [PATCH v11 47/56] media: verisilicon: Refactor postprocessor to store more buffers
` [PATCH v11 48/56] media: verisilicon: Store chroma and motion vectors offset
` [PATCH v11 49/56] media: verisilicon: g2: Use common helpers to compute chroma and mv offsets
` [PATCH v11 50/56] media: verisilicon: vp9: Allow to change resolution while streaming
` [PATCH v11 51/56] media: core: Rework how create_buf index returned value is computed
` [PATCH v11 52/56] media: core: Add bitmap manage bufs array entries
` [PATCH v11 53/56] media: core: Free range of buffers
` [PATCH v11 54/56] media: v4l2: Add DELETE_BUFS ioctl
` [PATCH v11 55/56] media: v4l2: Add mem2mem helpers for "
` [PATCH v11 56/56] media: test-drivers: Use helper "
[PATCH] coresight: etr: Use noncontiguous api instead of noncoherent
2023-10-12 11:11 UTC
[PATCH] coresight-tmc-etr: Fix busy error when enable multiple sources
2023-10-12 11:12 UTC (2+ messages)
[PATCH V15 0/4] Add PWM support for IPQ chipsets
2023-10-12 10:25 UTC (5+ messages)
` [PATCH V15 3/4] dt-bindings: mfd: qcom,tcsr: Add simple-mfd support for IPQ6018
` (subset) "
[PATCH v1 00/10] Enable cpufreq for IPQ5332 & IPQ9574
2023-10-12 10:11 UTC (8+ messages)
` [PATCH v1 07/10] arm64: dts: qcom: ipq5332: populate the opp table based on the eFuse
[PATCH 0/4] Enable pwm support for IPQ5332 & IPQ9574 SoCs
2023-10-12 10:07 UTC (3+ messages)
` [PATCH 2/4] dt-bindings: mfd: qcom,tcsr: Extend simple-mfd & pwm support for IPQ targets
` (subset) "
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox