messages from 2023-10-31 16:34:48 to 2023-11-03 13:49:32 UTC [more...]
[PATCH v6 1/5] misc: fastrpc: Add fastrpc multimode invoke request support
2023-11-03 13:49 UTC (2+ messages)
[RFC PATCH 0/5] Add QPIC SPI NAND driver support
2023-11-03 13:46 UTC (28+ messages)
` [RFC PATCH 1/5] mtd: nand: ecc-qcom: Add support for ECC Engine Driver
` [RFC PATCH 2/5] arm64: dts: qcom: ipq9574: Add ecc engine support
` [RFC PATCH 4/5] spi: qpic: Add support for qpic spi nand driver
` [RFC PATCH 5/5] arm64: dts: qcom: ipq9574: Add support for SPI nand
[PATCH 1/3] soundwire: qcom: drop unneeded DAI .set_stream callback
2023-11-03 13:43 UTC (3+ messages)
[PATCH v4 0/7] media: qcom: camss: Introduce support for named power-domains
2023-11-03 12:29 UTC (8+ messages)
` [PATCH v4 1/7] media: qcom: camss: Flag which VFEs require a power-domain
` [PATCH v4 2/7] media: qcom: camss: Convert to per-VFE pointer for power-domain linkages
` [PATCH v4 3/7] media: qcom: camss: Use common VFE pm_domain_on/pm_domain_off where applicable
` [PATCH v4 4/7] media: qcom: camss: Move VFE power-domain specifics into vfe.c
` [PATCH v4 5/7] media: qcom: camss: Add support for named power-domains
` [PATCH v4 6/7] media: qcom: camss: Flag VFE-lites to support more VFEs
` [PATCH v4 7/7] media: qcom: camss: Flag CSID-lites to support more CSIDs
[PATCH] soc: qcom: llcc: Fix dis_cap_alloc and retain_on_pc configuration
2023-11-03 11:17 UTC (2+ messages)
[PATCH v2] arm64: dts: qcom: sc7280: Add capacity and DPC properties
2023-11-03 10:54 UTC
[PATCH v11 0/4] add clock controller of qca8386/qca8084
2023-11-03 10:48 UTC (5+ messages)
` [PATCH v11 1/4] clk: qcom: branch: Add clk_branch2_prepare_ops
` [PATCH v11 2/4] dt-bindings: clock: add qca8386/qca8084 clock and reset definitions
` [PATCH v11 3/4] clk: qcom: common: commonize qcom_cc_really_probe
` [PATCH v11 4/4] clk: qcom: add clock controller driver for qca8386/qca8084
[PATCH RESEND v3 0/5] PM: domains: Add control for switching back and forth to HW control
2023-11-03 10:44 UTC (12+ messages)
` [PATCH RESEND v3 1/5] PM: domains: Allow devices attached to genpd to be managed by HW
` [PATCH RESEND v3 2/5] PM: domains: Add the domain HW-managed mode to the summary
` [PATCH RESEND v3 3/5] clk: qcom: gdsc: Add set and get hwmode callbacks to switch GDSC mode
` [PATCH RESEND v3 4/5] clk: qcom: Use HW_CTRL_TRIGGER flag to switch video GDSC to HW mode
` [PATCH RESEND v3 5/5] venus: pm_helpers: Use dev_pm_genpd_set_hwmode to switch GDSC mode
[PATCH v1] ARM: dts: msm: Add capacity and DPC properties for sc7280 soc
2023-11-03 10:21 UTC (2+ messages)
[PATCH v13 00/10] Add multiport support for DWC3 controllers
2023-11-03 10:04 UTC (10+ messages)
` [PATCH v13 05/10] usb: dwc3: qcom: Refactor IRQ handling in QCOM Glue driver
[PATCH V3 0/4] Add support for IPQ5018 tsens
2023-11-03 8:11 UTC (6+ messages)
` [PATCH V3 4/4] arm64: dts: qcom: ipq5018: Add tsens node
[PATCH v1 0/3] arm64: qcom: sa8775p: add cache coherency support for SA8775P
2023-11-03 7:58 UTC (12+ messages)
` [PATCH v1 1/3] PCI: qcom: Enable cache coherency for SA8775P RC
` [PATCH v1 2/3] PCI: qcom-ep: Enable cache coherency for SA8775P EP
[RFC 0/8] Enable runtime suspend resume for QCOM devices
2023-11-03 5:34 UTC (6+ messages)
` [RFC 1/8] dt-bindings: usb: qcom,dwc3: Add bindings to enable runtime
[PATCH v5 0/5] PCI: qcom: Add support for OPP
2023-11-03 5:12 UTC (9+ messages)
` [PATCH v5 4/5] PCI: qcom: Return error from 'qcom_pcie_icc_update'
` [PATCH v5 5/5] PCI: qcom: Add OPP support to scale performance state of power domain
[PATCH] firmware: qcom-scm: Support multiple waitq contexts
2023-11-03 0:38 UTC (3+ messages)
[PATCH v10 0/4] Misc SCM driver changes
2023-11-02 17:14 UTC (5+ messages)
` [PATCH v10 1/4] firmware: qcom: scm: provide a read-modify-write function
` [PATCH v10 2/4] firmware: qcom: scm: Modify only the download bits in TCSR register
` [PATCH v10 3/4] firmware: qcom: scm: Rework dload mode availability check
` [PATCH v10 4/4] pinctrl: qcom: Use qcom_scm_io_rmw() function
[PATCH] usb: misc: eud: Add IRQ check for platform_get_irq()
2023-11-02 16:06 UTC (2+ messages)
[PATCH v3 0/5] media: qcom: camss: Introduce support for named power-domains
2023-11-02 15:10 UTC (8+ messages)
` [PATCH v3 1/5] media: qcom: camss: Flag which VFEs require a power-domain
` [PATCH v3 2/5] media: qcom: camss: Convert to per-VFE pointer for power-domain linkages
` [PATCH v3 3/5] media: qcom: camss: Use common VFE pm_domain_on/pm_domain_off where applicable
` [PATCH v3 4/5] media: qcom: camss: Move VFE power-domain specifics into vfe.c
` [PATCH v3 5/5] media: qcom: camss: Add support for named power-domains
[PATCH 0/6] media: qcom: camss: Add sc8280xp support
2023-11-02 13:47 UTC (13+ messages)
` [PATCH 1/6] media: dt-bindings: media: camss: Add qcom,sc8280xp-camss binding
` [PATCH 2/6] media: qcom: camss: Add CAMSS_SC8280XP enum
` [PATCH 3/6] media: qcom: camss: csiphy-3ph: Add Gen2 v1.1 two-phase MIPI CSI-2 DPHY init
` [PATCH 4/6] media: qcom: camss: Add sc8280xp resource details
` [PATCH 5/6] media: qcom: camss: Add sc8280xp support
` [PATCH 6/6] media: qcom: camss: vfe-17x: Rename camss-vfe-170 to camss-vfe-17x
[PATCH 0/9] interconnect: Convert to platform remove callback returning void
2023-11-02 13:43 UTC (9+ messages)
` [PATCH 1/9] interconnect: qcom: Make qnoc_remove return void
` [PATCH 6/9] interconnect: qcom/msm8974: Convert to platform remove callback returning void
` [PATCH 7/9] interconnect: qcom/osm-l3: "
` [PATCH 8/9] interconnect: qcom/smd-rpm: "
[PATCH RFC 0/8] arm64: dts: qcom: Introduce SM8650 platforms device tree
2023-11-02 13:32 UTC (5+ messages)
` [PATCH RFC 2/8] arm64: dts: qcom: add initial SM8650 dtsi
[PATCH v2 0/3] remoteproc: qcom: Introduce DSP support for SM8650
2023-11-02 11:41 UTC (7+ messages)
` [PATCH v2 2/3] remoteproc: qcom: pas: make region assign more generic
[PATCH v10 0/4] Input: add initial support for Goodix Berlin touchscreen IC
2023-11-02 10:32 UTC (4+ messages)
` [PATCH v10 2/4] Input: add core support for Goodix Berlin Touchscreen IC
[PATCH v14 00/56] Add DELETE_BUF ioctl
2023-11-02 8:17 UTC (22+ messages)
` [PATCH v14 32/56] media: meson: vdec: Stop direct calls to queue num_buffers field
` [PATCH v14 38/56] media: ti: "
` [PATCH v14 39/56] media: usb: airspy: "
` [PATCH v14 40/56] media: usb: cx231xx: "
` [PATCH v14 41/56] media: usb: hackrf: "
` [PATCH v14 42/56] media: usb: usbtv: "
` [PATCH v14 43/56] media: videobuf2: Be more flexible on the number of queue stored buffers
` [PATCH v14 44/56] media: core: Report the maximum possible number of buffers for the queue
` [PATCH v14 45/56] media: test-drivers: vivid: Increase max supported buffers for capture queues
` [PATCH v14 46/56] media: test-drivers: vicodec: Increase max supported capture queue buffers
` [PATCH v14 47/56] media: verisilicon: Refactor postprocessor to store more buffers
` [PATCH v14 48/56] media: verisilicon: Store chroma and motion vectors offset
` [PATCH v14 49/56] media: verisilicon: g2: Use common helpers to compute chroma and mv offsets
` [PATCH v14 50/56] media: verisilicon: vp9: Allow to change resolution while streaming
` [PATCH v14 51/56] media: core: Rework how create_buf index returned value is computed
` [PATCH v14 52/56] media: core: Add bitmap manage bufs array entries
` [PATCH v14 53/56] media: core: Free range of buffers
` [PATCH v14 54/56] media: v4l2: Add DELETE_BUFS ioctl
` [PATCH v14 55/56] media: v4l2: Add mem2mem helpers for "
` [PATCH v14 56/56] media: test-drivers: Use helper "
[PATCH v2] bus: mhi: host: pci_generic: Add SDX75 based modem support
2023-11-02 5:55 UTC
[PATCH v2 0/8] Add support to configure TPDM CMB subunit
2023-11-02 1:50 UTC (14+ messages)
` [PATCH v2 1/8] dt-bindings: arm: Add support for CMB element size
` [PATCH v2 2/8] coresight-tpda: Add support to configure CMB element
` [PATCH v2 4/8] coresight-tpdm: Add support to configure CMB
` [PATCH v2 7/8] dt-bindings: arm: Add support for TPDM CMB MSR register
[PATCH v6 00/10] drm/msm/dpu: simplify DPU sub-blocks info
2023-11-01 21:32 UTC (9+ messages)
` [PATCH v6 09/10] drm/msm/dpu: merge DPU_SSPP_SCALER_QSEED3, QSEED3LITE, QSEED4
[PATCH] drm/msm/dpu: enable SmartDMA on SM8450
2023-11-01 19:36 UTC (2+ messages)
` [Freedreno] "
[PATCH v2] drm/msm: remove unnecessary NULL check
2023-11-01 19:23 UTC (2+ messages)
[PATCH v2 0/2] drm/msm/dp: fix DP subconnector handling
2023-11-01 16:19 UTC (5+ messages)
` [PATCH v2 1/2] drm/msm/dp: don't touch DP subconnector property in eDP case
` [PATCH v2 2/2] drm/msm/dp: attach the DP subconnector property
[PATCH v2 0/3] cpufreq: Add basic cpufreq scaling for Qualcomm MSM8909
2023-11-01 14:56 UTC (11+ messages)
` [PATCH v2 2/3] cpufreq: qcom-nvmem: Enable virtual power domain devices
[PATCH v1] coresight-tpdm: Correct the property name of MSR number
2023-11-01 13:26 UTC (2+ messages)
[PATCH v3] firmware: qcom_scm: Clear download bit during reboot
2023-11-01 10:41 UTC (12+ messages)
[PATCH 1/3] dt-bindings: clock: qcom: ipq6018: add USB GDSCs
2023-11-01 7:57 UTC (4+ messages)
` [PATCH 2/3] clk: "
[PATCH] dt-bindings: ufs: qcom: Add msi-parent for UFS MCQ
2023-11-01 7:48 UTC (3+ messages)
[RFC 0/1] Add custom alloc and free pgtable callback
2023-11-01 7:11 UTC (2+ messages)
` [RFC 1/1] arm-smmu: Add iommu support to share pgtable
[PATCH v6 0/4] arm64: qcom: sa8775p: add support for EP PCIe
2023-11-01 7:05 UTC (8+ messages)
` [PATCH v6 1/4] dt-bindings: PCI: qcom-ep: Add support for SA8775P SoC
` [PATCH v6 2/4] PCI: qcom-ep: Add support for SA8775P SOC
` [PATCH v6 4/4] arm64: dts: qcom: sa8775p: Add ep pcie0 controller node
[PATCH v2] bus: mhi: host: Add alignment check for event ring read pointer
2023-11-01 5:20 UTC (3+ messages)
[PATCH] drm/sched: Convert the GPU scheduler to variable number of run-queues
2023-11-01 2:37 UTC (6+ messages)
[PATCH v7d 00/23] fix DRM_USE_DYNAMIC_DEBUG=y regression
2023-11-01 0:26 UTC (24+ messages)
` [PATCH v7d 01/23] test-dyndbg: fixup CLASSMAP usage error
` [PATCH v7d 02/23] dyndbg: reword "class unknown," to "class:_UNKNOWN_"
` [PATCH v7d 03/23] dyndbg: make ddebug_class_param union members same size
` [PATCH v7d 04/23] dyndbg: replace classmap list with a vector
` [PATCH v7d 05/23] dyndbg: ddebug_apply_class_bitmap - add module arg, select on it
` [PATCH v7d 06/23] dyndbg: split param_set_dyndbg_classes to module/wrapper fns
` [PATCH v7d 07/23] dyndbg: drop NUM_TYPE_ARRAY
` [PATCH v7d 08/23] dyndbg: reduce verbose/debug clutter
` [PATCH v7d 09/23] dyndbg: silence debugs with no-change updates
` [PATCH v7d 10/23] dyndbg: tighten ddebug_class_name() 1st arg type
` [PATCH v7d 11/23] dyndbg: tighten fn-sig of ddebug_apply_class_bitmap
` [PATCH v7d 12/23] dyndbg: reduce verbose=3 messages in ddebug_add_module
` [PATCH v7d 13/23] dyndbg-API: remove DD_CLASS_TYPE_(DISJOINT|LEVEL)_NAMES and code
` [PATCH v7d 14/23] dyndbg-API: fix CONFIG_DRM_USE_DYNAMIC_DEBUG regression
` [PATCH v7d 15/23] dyndbg: refactor ddebug_classparam_clamp_input
` [PATCH v7d 16/23] dyndbg-API: promote DYNDBG_CLASSMAP_PARAM to API
` [PATCH v7d 17/23] dyndbg-doc: add classmap info to howto
` [PATCH v7d 18/23] dyndbg: reserve flag bit _DPRINTK_FLAGS_PREFIX_CACHED
` [PATCH v7d 19/23] dyndbg: add _DPRINTK_FLAGS_INCL_LOOKUP
` [PATCH v7d 20/23] dyndbg: refactor *dynamic_emit_prefix
` [PATCH v7d 21/23] drm: use correct ccflags-y spelling
` [PATCH v7d 22/23] drm-drivers: DRM_CLASSMAP_USE in 2nd batch of drivers, helpers
` [PATCH v7d 23/23] drm: restore CONFIG_DRM_USE_DYNAMIC_DEBUG un-BROKEN
[PATCH v6 0/7] Add support for LUT PPG
2023-10-31 22:18 UTC (4+ messages)
` [PATCH v6 3/7] soc: qcom: add QCOM PBS driver
[PATCH 1/3] clk: qcom: gcc-ipq6018: Use floor ops for sdcc clocks
2023-10-31 19:46 UTC (3+ messages)
` [PATCH 3/3] arm64: dts: qcom: ipq6018: add SDHCI node
[PATCH] drm/msm/dpu: Add missing safe_lut_tbl in sc8280xp catalog
2023-10-31 18:12 UTC (2+ messages)
[PATCH v2 0/5] media: qcom: camss: Introduce support for named power-domains
2023-10-31 17:10 UTC (4+ messages)
` [PATCH v2 5/5] media: qcom: camss: Add "
[PATCH v13 00/56] Add DELETE_BUF ioctl
2023-10-31 16:37 UTC (3+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox