messages from 2025-02-19 00:48:32 to 2025-02-20 10:53:09 UTC [more...]
[PATCH v3 00/25] drm/dumb-buffers: Fix and improve buffer-size calculation
2025-02-20 10:53 UTC (12+ messages)
` [PATCH v3 02/25] drm/dumb-buffers: Provide helper to set pitch and size
` [PATCH v3 06/25] drm/armada: Compute dumb-buffer sizes with drm_mode_size_dumb()
` [PATCH v3 23/25] drm/xe: "
[PATCH 0/6] PCI: qcom-ep: add support for using the EP on SAR2130P and SM8450
2025-02-20 10:50 UTC (10+ messages)
` [PATCH 1/6] dt-bindings: PCI: qcom-ep: describe optional IOMMU
` [PATCH 2/6] dt-bindings: PCI: qcom-ep: enable DMA for SM8450
` [PATCH 3/6] dt-bindings: PCI: qcom-ep: add SAR2130P compatible
` [PATCH 4/6] PCI: dwc: pcie-qcom-ep: enable EP support for SAR2130P
[PATCH 0/5] clk: qcom: Add support to attach multiple power domains in cc probe
2025-02-20 10:48 UTC (22+ messages)
` [PATCH 3/5] clk: qcom: common: Attach clock power domains conditionally
` [PATCH 4/5] clk: qcom: videocc: Add support to attach multiple power domains
` [PATCH 5/5] arm64: dts: qcom: Add MXC power domain to videocc nodes
[PATCH v2 0/5] drm/msm/dsi: Add DSC support to 2 panels in dual DSI mode
2025-02-20 10:38 UTC (9+ messages)
` [PATCH v2 1/5] drm/msm/dsi: add support VBIF_CTRL_PRIORITY to v2.8.0 controller
` [PATCH v2 2/5] drm/msm/dsi: check DSC width for the bonded DSI case
` [PATCH v2 3/5] drm/msm/dsi: support DSC configurations with slice_per_pkt > 1
` [PATCH v2 4/5] dt-bindings: display/msm: dsi-controller-main: Document dual panel property
` [PATCH v2 5/5] drm/msm/dsi: Support DSC for dual panel case
[PATCH v3] arm64: dts: qcom: x1e80100-qcp: Add WiFi/BT pwrseq
2025-02-20 10:28 UTC (2+ messages)
[PATCH 0/7] drm/msm/dpu: improve CTL handling on DPU >= 5.0 platforms
2025-02-20 10:26 UTC (8+ messages)
` [PATCH 1/7] drm/msm/dpu: don't overwrite CTL_MERGE_3D_ACTIVE register
` [PATCH 2/7] drm/msm/dpu: program master INTF value
` [PATCH 3/7] drm/msm/dpu: pass master interface to CTL configuration
` [PATCH 4/7] drm/msm/dpu: use single CTL if it is the only CTL returned by RM
` [PATCH 5/7] drm/msm/dpu: don't select single flush for active CTL blocks
` [PATCH 6/7] drm/msm/dpu: allocate single CTL for DPU >= 5.0
` [PATCH 7/7] drm/msm/dpu: remove DPU_CTL_SPLIT_DISPLAY from CTL blocks on "
[PATCH v4 0/2] phy: qcom: qmp-pcie: Add PCIe PHY no_csr reset support
2025-02-20 10:22 UTC (3+ messages)
` [PATCH v4 1/2] phy: qcom: pcie: Determine has_nocsr_reset dynamically
` [PATCH v4 2/2] phy: qcom: qmp-pcie: Add PHY register retention support
[PATCH 0/8] dmaengine: qcom: bam_dma: Fix DT error handling for num-channels/ees
2025-02-20 10:09 UTC (8+ messages)
` [PATCH 7/8] dt-bindings: dma: qcom: bam-dma: Add missing required properties
[PATCH 0/3] i2c: qup: Allow scaling power domains and interconnect
2025-02-20 9:47 UTC (8+ messages)
` [PATCH 3/3] i2c: qup: Vote for interconnect bandwidth to DRAM
[PATCH v11 0/7] Add PCIe support for Qualcomm IPQ5332
2025-02-20 9:42 UTC (8+ messages)
` [PATCH v11 1/7] dt-bindings: phy: qcom,uniphy-pcie: Document PCIe uniphy
` [PATCH v11 2/7] phy: qcom: Introduce PCIe UNIPHY 28LP driver
` [PATCH v11 3/7] dt-bindings: PCI: qcom: Use sdx55 reg description for ipq9574
` [PATCH v11 4/7] arm64: dts: qcom: ipq9574: Reorder reg and reg-names
` [PATCH v11 5/7] dt-bindings: PCI: qcom: Document the IPQ5332 PCIe controller
` [PATCH v11 6/7] arm64: dts: qcom: ipq5332: Add PCIe related nodes
` [PATCH v11 7/7] arm64: dts: qcom: ipq5332-rdp441: Enable PCIe phys and controllers
[RFC PATCH v5 05/15] KVM: guest_memfd: Folio mappability states and functions that manage their transition
2025-02-20 9:26 UTC (3+ messages)
[PATCH 0/9] crypto: qce - refactor the driver
2025-02-20 9:14 UTC (9+ messages)
` [PATCH 9/9] crypto: qce - switch to using a mutex
[PATCH v2 0/4] arm64: dts: qcom: sm8750: Initial audio support (not yet complete)
2025-02-20 8:49 UTC (5+ messages)
` [PATCH v2 1/4] arm64: dts: qcom: sm8750: Add IPCC, SMP2P, AOSS and ADSP
` [PATCH v2 2/4] arm64: dts: qcom: sm8750: Add LPASS macro codecs and pinctrl
` [PATCH v2 3/4] arm64: dts: qcom: sm8750-mtp: Enable ADSP
` [PATCH v2 4/4] arm64: dts: qcom: sm8750-qrd: "
[PATCH net-next v4 00/15] Introduce an ethernet port representation
2025-02-20 8:35 UTC (4+ messages)
` [PATCH net-next v4 15/15] dt-bindings: net: Introduce the phy-port description
[BUG REPORT] MHI's resume from hibernate is broken
2025-02-20 7:50 UTC (4+ messages)
[PATCH 0/4] Add MST support for qcs8300 platform
2025-02-20 7:33 UTC (27+ messages)
` [PATCH 1/4] dt-bindings: display/msm: Redocument the dp-controller for QCS8300
` [PATCH 2/4] dt-bindings: display/msm: Add stream 1 pixel clock "
` [PATCH 4/4] arm64: dts: qcom: qcs8300: Add support for stream 1 clk for DP MST
[PATCH 0/4] PCI: dwc: Add PTM sysfs support
2025-02-20 7:27 UTC (11+ messages)
` [PATCH 1/4] perf/dwc_pcie: Move common DWC struct definitions to 'pcie-dwc.h'
` [PATCH 3/4] PCI: dwc: Add sysfs support for PTM
[PATCH v4 0/4] Update LPASS Audio clock driver for QCM6490 board
2025-02-20 4:45 UTC (8+ messages)
` [PATCH v4 1/4] dt-bindings: clock: qcom: Add compatible for QCM6490 boards
` [PATCH v4 2/4] clk: qcom: lpassaudiocc-sc7280: Add support for LPASS resets for QCM6490
` [PATCH v4 3/4] arm64: dts: qcom: qcm6490-idp: Update the LPASS audio node
` [PATCH v4 4/4] arm64: dts: qcom: qcs6490-rb3gen2: "
[PATCH v2 0/5] drm/msm/dpu: enable CDM for all supported platforms
2025-02-20 3:59 UTC (6+ messages)
` [PATCH v2 1/5] drm/msm/dpu: rename CDM block definition
` [PATCH v2 2/5] drm/msm/dpu: enable CDM_0 for DPUs 5.x+
` [PATCH v2 3/5] drm/msm/dpu: enable CDM_0 for DPUs 1.x - 4.x
` [PATCH v2 4/5] drm/msm/dpu: enable CDM_0 for SC8280XP platform
` [PATCH v2 5/5] drm/msm/dpu: enable CDM_0 for X Elite platform
[PATCH net-next 0/3] net: stmmac: further cleanups
2025-02-20 3:10 UTC (6+ messages)
` [PATCH net-next 2/3] net: stmmac: remove useless priv->flow_ctrl
` [PATCH net-next 3/3] net: stmmac: "speed" passed to fix_mac_speed is an int
[PATCH v2 00/16] drm/msm: Add support for SM8750
2025-02-20 0:50 UTC (32+ messages)
` [PATCH v2 01/16] dt-bindings: display/msm: dsi-controller-main: Combine if:then: entries
` [PATCH v2 02/16] dt-bindings: display/msm: dsi-controller-main: Add missing minItems
` [PATCH v2 03/16] dt-bindings: display/msm: dsi-phy-7nm: Add SM8750
` [PATCH v2 04/16] dt-bindings: display/msm: dsi-controller-main: "
` [PATCH v2 05/16] dt-bindings: display/msm: dp-controller: "
` [PATCH v2 06/16] dt-bindings: display/msm: qcom,sm8650-dpu: "
` [PATCH v2 07/16] dt-bindings: display/msm: qcom,sm8750-mdss: "
` [PATCH v2 08/16] drm/msm/dpu: Drop useless comments
` [PATCH v2 09/16] drm/msm/dpu: Add LM_7, DSC_[67], PP_[67] and MERGE_3D_5
` [PATCH v2 10/16] drm/msm/dpu: Add handling of LM_6 and LM_7 bits in pending flush mask
` [PATCH v2 11/16] drm/msm/dsi/phy: Add support for SM8750
` [PATCH v2 15/16] drm/msm/dpu: Implement new v12.0 DPU differences
[PATCH] MAINTAINERS: Update my email address
2025-02-19 21:41 UTC
[PATCH net-next 0/8] net: phy: move PHY package code to its own source file
2025-02-19 21:08 UTC (9+ messages)
` [PATCH net-next 1/8] net: phy: move PHY package code from phy_device.c to "
` [PATCH net-next 2/8] net: phy: move PHY package related code from phy.h to phy_package.c
` [PATCH net-next 3/8] net: phy: add getters for public members of struct phy_package_shared
` [PATCH net-next 4/8] net: phy: qca807x: use new phy_package_shared getters
` [PATCH net-next 5/8] net: phy: micrel: "
` [PATCH net-next 6/8] net: phy: mtk-ge-soc: "
` [PATCH net-next 7/8] net: phy: mscc: "
` [PATCH net-next 8/8] net: phy: make struct phy_package_shared private to phylib
[PATCH v3 0/5] drm/msm: add a display mmu fault handler
2025-02-19 20:41 UTC (7+ messages)
` [PATCH v3 1/5] drm/msm: register a fault handler for display mmu faults
` [PATCH v3 2/5] drm/msm/iommu: rename msm_fault_handler to msm_gpu_fault_handler
` [PATCH v3 3/5] drm/msm/iommu: introduce msm_iommu_disp_new() for msm_kms
` [PATCH v3 4/5] drm/msm: switch msm_kms to use msm_iommu_disp_new()
` [PATCH v3 5/5] drm/msm/dpu: rate limit snapshot capture for mmu faults
[PATCH] drm/msm/dsi: Add check for devm_kstrdup()
2025-02-19 20:09 UTC (3+ messages)
[PATCH V3 0/2] schemas: pci: bridge: Document PCI L0s & L1 entry delay and N_FTS
2025-02-19 19:49 UTC (2+ messages)
[PATCH 4/8] PCI: dwc: qcom: Update ICC & OPP votes based upon the requested speed
2025-02-19 18:27 UTC (3+ messages)
[PATCH 0/4] thermal: qcom-spmi-temp-alarm: Add support for new TEMP_ALARM subtypes
2025-02-19 18:16 UTC (4+ messages)
` [PATCH 4/4] thermal: qcom-spmi-temp-alarm: add support for LITE PMIC peripherals
[PATCH 0/8] bus: mhi: host: Add support for mhi bus bw
2025-02-19 18:02 UTC (9+ messages)
` [PATCH 2/8] PCI/bwctrl: Add support to scale bandwidth before & after link re-training
` [PATCH 6/8] bus: mhi: host: Add support for Bandwidth scale
` [PATCH 7/8] PCI: Make pcie_link_speed variable public & export pci_set_target_speed()
[PATCH 1/1] scsi: ufs: qcom: Remove dead code in ufs_qcom_cfg_timers()
2025-02-19 17:27 UTC (2+ messages)
[PATCH v5 0/2] drm/msm/dsi/phy: Improvements around concurrent PHY_CMN_CLK_CFG[01]
2025-02-19 17:11 UTC (5+ messages)
` [PATCH v5 1/2] drm/msm/dsi/phy: Use dsi_pll_cmn_clk_cfg1_update() when registering PLL
` [PATCH v5 2/2] drm/msm/dsi/phy: Define PHY_CMN_CLK_CFG[01] bitfields and simplify saving
[PATCH 0/4] arm64: dts: qcom: x1e80100: Fix thermal trip points
2025-02-19 16:28 UTC (11+ messages)
` [PATCH 1/4] arm64: dts: qcom: x1e80100: Fix video thermal zone
` [PATCH 2/4] arm64: dts: qcom: x1e80100: Apply consistent critical thermal shutdown
` [PATCH 3/4] arm64: dts: qcom: x1e80100: Add GPU cooling
` [PATCH 4/4] arm64: dts: qcom: x1e80100: Drop unused passive thermal trip points for CPU
[PATCH v4 0/5] nvmem: qfprom: add Qualcomm SAR2130P support
2025-02-19 15:14 UTC (4+ messages)
` [PATCH v4 2/5] nvmem: core: verify cell's raw_len
[PATCH] arm64: dts: qcom: Drop `tx-sched-sp` property
2025-02-19 14:42 UTC (2+ messages)
[PATCH 0/2] bus: mhi: host: pci_generic: Couple of recovery fixes
2025-02-19 14:14 UTC (6+ messages)
` [PATCH 1/2] bus: mhi: host: pci_generic: Use pci_try_reset_function() to avoid deadlock
[net PATCH] net: phy: qcom: qca807x fix condition for DAC_DSP_BIAS_CURRENT
2025-02-19 13:59 UTC (2+ messages)
[PATCH v2 0/6] arm64: dts: qcom: x1e80100: enable rtc
2025-02-19 13:41 UTC (7+ messages)
` [PATCH v2 1/6] dt-bindings: rtc: qcom-pm8xxx: document qcom,no-alarm flag
` [PATCH v2 2/6] rtc: pm8xxx: add support for uefi offset
` [PATCH v2 3/6] rtc: pm8xxx: mitigate flash wear
` [PATCH v2 4/6] rtc: pm8xxx: implement qcom,no-alarm flag for non-HLOS owned alarm
` [PATCH v2 5/6] arm64: dts: qcom: sc8280xp-x13s: switch to uefi rtc offset
` [PATCH v2 6/6] arm64: dts: qcom: x1e80100: enable rtc
[PATCH 0/7] arm64: dts: qcom: x1e80100: enable rtc
2025-02-19 13:37 UTC (3+ messages)
[PATCH net-next v3 00/14] Add PPE driver for Qualcomm IPQ9574 SoC
2025-02-19 13:00 UTC (4+ messages)
` [PATCH net-next v3 04/14] net: ethernet: qualcomm: Initialize PPE buffer management for IPQ9574
[PATCH v3 0/2] drm/bridge: reuse DRM HDMI Audio helpers for DisplayPort bridges
2025-02-19 13:00 UTC (3+ messages)
` [PATCH v3 1/2] drm/bridge: split HDMI Audio from DRM_BRIDGE_OP_HDMI
` [PATCH v3 2/2] drm/msm/dp: reuse generic HDMI codec implementation
[PATCH v35 00/31] Introduce QC USB SND audio offloading support
2025-02-19 11:24 UTC (6+ messages)
` [PATCH v35 16/31] ASoC: usb: Create SOC USB SND jack kcontrol
` [PATCH v35 19/31] ASoC: doc: Add documentation for SOC USB
` [PATCH v35 28/31] ALSA: usb-audio: qcom: Introduce QC USB SND offloading support
` [PATCH v35 30/31] ALSA: usb-audio: qcom: Add USB offload route kcontrol
[PATCH net-next v5 0/5] Add PCS support for Qualcomm IPQ9574 SoC
2025-02-19 10:46 UTC (4+ messages)
[PATCH 1/2] arm64: dts: qcom: sm8750: Change labels to lower-case
2025-02-19 9:14 UTC (4+ messages)
` [PATCH 2/2] arm64: dts: qcom: Corret white-space style
[PATCH] media: iris: rename module file
2025-02-19 8:01 UTC
[PATCH v12 0/7] Coresight: Add Coresight TMC Control Unit driver
2025-02-19 0:59 UTC (3+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox