messages from 2025-03-20 15:57:58 to 2025-03-24 08:45:48 UTC [more...]
[PATCH v3 00/10] phy: samsung: add Exynos2200 SNPS eUSB2 driver
2025-03-24 8:45 UTC (20+ messages)
` [PATCH v3 01/10] dt-bindings: phy: add exynos2200 eusb2 phy support
` [PATCH v3 02/10] dt-bindings: phy: samsung,usb3-drd-phy: add exynos2200 support
` [PATCH v3 03/10] phy: move phy-qcom-snps-eusb2 out of its vendor sub-directory
` [PATCH v3 04/10] phy: phy-snps-eusb2: refactor constructs names
` [PATCH v3 05/10] phy: phy-snps-eusb2: split phy init code
` [PATCH v3 06/10] phy: phy-snps-eusb2: make repeater optional
` [PATCH v3 07/10] phy: phy-snps-eusb2: make reset control optional
` [PATCH v3 08/10] phy: phy-snps-eusb2: refactor reference clock init
` [PATCH v3 09/10] phy: phy-snps-eusb2: add support for exynos2200
` [PATCH v3 10/10] phy: exynos5-usbdrd: support Exynos USBDRD 3.2 4nm controller
[PATCH v2 0/4] Add video clock controller for SM6350
2025-03-24 8:41 UTC (5+ messages)
` [PATCH v2 1/4] arm64: dts: qcom: sm6350: Align reg properties with latest style
` [PATCH v2 2/4] dt-bindings: clock: add SM6350 QCOM video clock bindings
` [PATCH v2 3/4] clk: qcom: Add video clock controller driver for SM6350
` [PATCH v2 4/4] arm64: dts: qcom: sm6350: Add video clock controller
[PATCH 0/3] Add video clock controller for SM6350
2025-03-24 8:35 UTC (10+ messages)
` [PATCH 1/3] dt-bindings: clock: add SM6350 QCOM video clock bindings
` [PATCH 2/3] clk: qcom: Add video clock controller driver for SM6350
` [PATCH 3/3] arm64: dts: qcom: sm6350: Add video clock controller
[PATCH 0/3] ASoC: codec: wcd93xx: Convert to GPIO descriptors
2025-03-24 8:34 UTC (17+ messages)
` [PATCH 1/3] ASoC: codec: wcd939x: "
` [PATCH 2/3] ASoC: codec: wcd938x: "
` [PATCH 3/3] ASoC: codec: wcd9335: "
[PATCH v6 0/6] Enable IPQ5018 PCI support
2025-03-24 8:06 UTC (18+ messages)
` [PATCH v6 1/6] dt-bindings: phy: qcom: uniphy-pcie: Add ipq5018 compatible
` [PATCH v6 2/6] phy: qualcomm: qcom-uniphy-pcie 28LP add support for IPQ5018
` [PATCH v6 3/6] dt-bindings: PCI: qcom: Add IPQ5018 SoC
` [PATCH v6 4/6] PCI: qcom: Add support for IPQ5018
` [PATCH v6 5/6] arm64: dts: qcom: ipq5018: Add PCIe related nodes
` [PATCH v6 6/6] arm64: dts: qcom: ipq5018: Enable PCIe
[PATCH V4 0/3] scsi: ufs-qcom: Enable Hibern8, MCQ, and Testbus registers Dump
2025-03-24 7:41 UTC (2+ messages)
[PATCH V3 0/3] scsi: ufs-qcom: Enable Dumping of Hibern8, MCQ, and Testbus Registers
2025-03-24 7:39 UTC (5+ messages)
` [PATCH V3 2/3] scsi: ufs-qcom: Add support for dumping MCQ registers
[PATCH v1 0/3] arm64: qcom: x1e80100-qcp: Add power supply and sideband signals config for PCIe3
2025-03-24 7:38 UTC (18+ messages)
` [PATCH v1 1/3] arm64: defconfig: enable PCI Power Control "
` [PATCH v1 3/3] arm64: dts: qcom: x1e80100-qcp: Add power control and sideband signals "
` [PATCH v1 2/3] arm64: dts: qcom: x1e80100: add bus topology for PCIe domain 3
[PATCH v3 5/6] arm64: dts: qcom: ipq5018: Add PCIe related nodes
2025-03-24 7:33 UTC (4+ messages)
[PATCH v2 0/7] media: qcom: iris: add support for SM8650
2025-03-24 7:23 UTC (3+ messages)
` [PATCH v2 1/7] dt-bindings: media: qcom,sm8550-iris: document SM8650 IRIS accelerator
[PATCH v3 0/2] Enable WLAN for qcs8300-ride
2025-03-24 7:16 UTC (4+ messages)
` [PATCH v3 2/2] arm64: dts: qcom: qcs8300-ride: enable WLAN on qcs8300-ride
[PATCH v4] arm64: dts: qcom: Add industrial mezzanine support for qcs6490-rb3gen2
2025-03-23 22:34 UTC (2+ messages)
contact formulier Dubbelgoed, reactie
2025-03-23 12:39 UTC
[PATCH] drm/msm/adreno: Drop fictional address_space_size
2025-03-23 1:18 UTC (2+ messages)
[PATCH v1 1/1] i2c: qcom-geni: Use generic definitions for bus frequencies
2025-03-22 16:18 UTC (2+ messages)
[GIT PULL] Qualcomm clock updates for v6.15
2025-03-22 13:34 UTC
[PATCH 0/3] PCI: qcom: Move PERST# GPIO & phy retrieval from controller to PCIe bridge node
2025-03-22 3:00 UTC (4+ messages)
` [PATCH 1/3] dt-bindings: PCI: qcom: Move phy, wake & reset gpio's to root port
` [PATCH 2/3] arm64: qcom: sc7280: Move phy, perst to root port node
` [PATCH 3/3] PCI: qcom: Add support for multi-root port
[PATCH v2 0/5] ASoC: wcd938x: enable t14s audio headset
2025-03-21 22:00 UTC (19+ messages)
` [PATCH v2 1/5] dt-bindings: mux: add optional regulator binding to gpio mux
` [PATCH v2 2/5] mux: gpio: add optional regulator support
` [PATCH v2 3/5] ASoC: dt-bindings: wcd93xx: add bindings for audio mux controlling hp
` [PATCH v2 4/5] ASoC: codecs: wcd938x: add mux control support for hp audio mux
` [PATCH v2 5/5] arm64: dts: qcom: x1e78100-t14s: Enable audio headset support
[PATCH v5 0/7] usb: dwc3: qcom: Flatten dwc3 structure
2025-03-21 21:52 UTC (15+ messages)
` [PATCH v5 1/7] usb: dwc3: qcom: Snapshot driver for backwards compatibilty
` [PATCH v5 2/7] dt-bindings: usb: Introduce qcom,snps-dwc3
` [PATCH v5 3/7] usb: dwc3: core: Expose core driver as library
` [PATCH v5 4/7] usb: dwc3: core: Don't touch resets and clocks
` [PATCH v5 5/7] usb: dwc3: qcom: Don't rely on drvdata during probe
` [PATCH v5 6/7] usb: dwc3: qcom: Transition to flattened model
[PATCH v6 0/7] KVM: Restricted mapping of guest_memfd at the host and arm64 support
2025-03-21 20:09 UTC (3+ messages)
` [PATCH v6 5/7] KVM: guest_memfd: Restore folio state after final folio_put()
[PATCH v36 00/31] Introduce QC USB SND audio offloading support
2025-03-21 20:06 UTC (3+ messages)
[PATCH v2] bus: mhi: host: Address conflict between power_up and syserr
2025-03-21 17:40 UTC
[PATCH v2 00/10] Add DSI display support for SA8775P target
2025-03-21 17:37 UTC (5+ messages)
` [PATCH v2 08/10] drm/bridge: anx7625: enable HPD interrupts
[PATCH v3 0/3] media: qcom: iris: add support for SA8775P
2025-03-21 17:24 UTC (7+ messages)
` [PATCH v3 1/3] dt-bindings: media: qcom,sm8550-iris: document SA8775p IRIS accelerator
` [PATCH v3 2/3] arm64: dts: qcom: sa8775p: add support for video node
` [PATCH v3 3/3] arm64: dts: qcom: sa8775p-ride: enable video
[PATCH] arm64: dts: qcom: sm6350: add APR and some audio-related services
2025-03-21 17:20 UTC (2+ messages)
[PATCH] bus: mhi: host: Address conflict between power_up and syserr
2025-03-21 16:24 UTC (5+ messages)
[PATCH RFC] ufs: delegate the interrupt service routine to a threaded irq handler
2025-03-21 16:20 UTC (2+ messages)
[PATCH] remoteproc: sysmon: Update qcom_add_sysmon_subdev() comment
2025-03-21 16:16 UTC (2+ messages)
[PATCH] arm64: dts: qcom: Add device tree for TUXEDO Elite 14 Gen1
2025-03-21 15:51 UTC (7+ messages)
[PATCH v2 0/3] Add support for gpdsp remoteproc on sa8775p
2025-03-21 14:07 UTC (9+ messages)
` [PATCH v2 2/3] misc: fastrpc: add support for gpdsp remoteproc
` [PATCH v2 3/3] dt-bindings: misc: qcom,fastrpc: Add GPDSPs label
[PATCH v3 0/7] Provides support for Trigger Generation Unit
2025-03-21 14:00 UTC (4+ messages)
[PATCH 0/3] of: Common "memory-region" parsing
2025-03-21 13:14 UTC (8+ messages)
` [PATCH 3/3] remoteproc: Use of_reserved_mem_region_* functions for "memory-region"
` [Linux-stm32] "
[PATCH v2 0/5] misc: fastrpc: Add invokeV2 to support new features
2025-03-21 13:13 UTC (11+ messages)
` [PATCH v2 4/5] misc: fastrpc: Add polling mode support for fastRPC driver
[PATCH 0/4] Add CMN PLL clock controller support for IPQ5424
2025-03-21 12:49 UTC (5+ messages)
` [PATCH 1/4] dt-bindings: clock: qcom: Add CMN PLL support for IPQ5424 SoC
` [PATCH 2/4] clk: qcom: cmnpll: Add IPQ5424 SoC support
` [PATCH 3/4] arm64: dts: ipq5424: Add CMN PLL node
` [PATCH 4/4] arm64: dts: qcom: Update IPQ5424 xo_board to use fixed factor clock
[PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615
2025-03-21 12:19 UTC (13+ messages)
[PATCH v5 0/6] Enable IPQ5018 PCI support
2025-03-21 10:43 UTC (9+ messages)
` [PATCH v5 1/6] dt-bindings: phy: qcom: uniphy-pcie: Add ipq5018 compatible
` [PATCH v5 2/6] phy: qualcomm: qcom-uniphy-pcie 28LP add support for IPQ5018
` [PATCH v5 3/6] dt-bindings: PCI: qcom: Add IPQ5018 SoC
` [PATCH v5 4/6] PCI: qcom: Add support for IPQ5018
` [PATCH v5 5/6] arm64: dts: qcom: ipq5018: Add PCIe related nodes
` [PATCH v5 6/6] arm64: dts: qcom: ipq5018: Enable PCIe
[PATCH v1 0/3] drm/ci: uprev mesa, IGT
2025-03-21 10:26 UTC (3+ messages)
` [PATCH v1 1/3] drm/ci: uprev mesa
[PATCH 0/1] Pass down connector to drm bridge detect hook
2025-03-21 10:05 UTC (4+ messages)
` [PATCH 1/1] drm/bridge: "
` "
[PATCH v7 0/8] dmaengine: qcom: bam_dma: add command descriptor support
2025-03-21 9:06 UTC (2+ messages)
[PATCH v5] clk: qcom: Add support for Camera Clock Controller on QCS8300
2025-03-21 3:56 UTC
[PATCH v4 0/3] media: qcom: iris: add support for SA8775P
2025-03-21 3:19 UTC (4+ messages)
` [PATCH v4 1/3] dt-bindings: media: qcom,sm8550-iris: document SA8775p IRIS accelerator
` [PATCH v4 2/3] arm64: dts: qcom: sa8775p: add support for video node
` [PATCH v4 3/3] arm64: dts: qcom: sa8775p-ride: enable video
[PATCH] arm64: dts: qcom: x1e80100-hp-omnibook-x14: Enable SMB2360 0 and 1
2025-03-20 22:31 UTC (3+ messages)
[PATCH] pinctrl: qcom: Clear latched interrupt status when changing IRQ type
2025-03-20 22:20 UTC (4+ messages)
[PATCH 0/2] arm64: dts: qcom: x1e80100-dell-xps13-9345: Enable fingerprint sensor
2025-03-20 22:16 UTC (3+ messages)
` [PATCH 2/2] "
[PATCH v2 0/3] media: qcom: iris: add support for SA8775P
2025-03-20 21:43 UTC (4+ messages)
` [PATCH v2 1/3] dt-bindings: media: qcom,sm8550-iris: document SA8775p IRIS accelerator
[PATCH v1] i2c: qcom-geni: Update i2c frequency table to match hardware guidance
2025-03-20 21:15 UTC (2+ messages)
[PATCH v3 0/5 RESEND] thermal: qcom-spmi-temp-alarm: Add support for new TEMP_ALARM subtypes
2025-03-20 20:24 UTC (6+ messages)
` [PATCH v3 1/5 RESEND] thermal: qcom-spmi-temp-alarm: enable stage 2 shutdown when required
` [PATCH v3 2/5 RESEND] thermal: qcom-spmi-temp-alarm: Add temp alarm data struct based on HW subtype
` [PATCH v3 3/5 RESEND] thermal: qcom-spmi-temp-alarm: Prepare to support additional Temp Alarm subtypes
` [PATCH v3 4/5 RESEND] thermal: qcom-spmi-temp-alarm: add support for GEN2 rev 2 PMIC peripherals
` [PATCH v3 5/5 RESEND] thermal: qcom-spmi-temp-alarm: add support for LITE "
[PATCH next] spi: spi-qpic-snand: use kmalloc() for OOB buffer allocation
2025-03-20 18:11 UTC
[GIT PULL] Qualcomm Arm64 DeviceTree updates for v6.15
2025-03-20 16:56 UTC (3+ messages)
[PATCH v2 0/8] clk: qcom: Add support to attach multiple power domains in cc probe
2025-03-20 16:29 UTC (4+ messages)
` [PATCH v2 2/8] clk: qcom: common: Add support to configure PLL
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox