messages from 2026-02-25 05:46:35 to 2026-02-26 06:11:08 UTC [more...]
[PATCH v11 0/7] Provide support for Trigger Generation Unit
2026-02-26 6:11 UTC (10+ messages)
` [PATCH v11 1/7] dt-bindings: arm: Add support for Qualcomm TGU trace
` [PATCH v11 2/7] qcom-tgu: Add TGU driver
` [PATCH v11 3/7] qcom-tgu: Add signal priority support
` [PATCH v11 4/7] qcom-tgu: Add TGU decode support
` [PATCH v11 5/7] qcom-tgu: Add support to configure next action
` [PATCH v11 6/7] qcom-tgu: Add timer/counter functionality for TGU
` [PATCH v11 7/7] qcom-tgu: Add reset node to initialize
[PATCH v4 0/3] Enable tertiary USB controller in OTG mode
2026-02-26 6:08 UTC (4+ messages)
` [PATCH v4 1/3] arm64: dts: qcom: lemans-evk: Enable GPIO expander interrupt for Lemans EVK
` [PATCH v4 2/3] arm64: dts: qcom: lemans: Add role-switch support and HS endpoint for tertiary USB controller
` [PATCH v4 3/3] arm64: dts: qcom: lemans-evk: Enable the "
[PATCH v2] arm64: dts: qcom: hamoa: Add PSCI SYSTEM_RESET2 types
2026-02-26 5:41 UTC
[PATCH v4 0/2] arm64: dts: qcom: Introduce sa8255p platform device tree
2026-02-26 4:51 UTC (3+ messages)
` [PATCH v4 1/2] dt-bindings: arm: qcom: add SA8255p Ride board
` [PATCH v4 2/2] arm64: dts: qcom: add initial support for qcom sa8255p-ride
[PATCH v3 0/3] Add support for GPUCC and GXCLK for SM8750
2026-02-26 4:45 UTC (4+ messages)
` [PATCH v3 2/3] clk: qcom: Add a driver for SM8750 GPU clocks
[PATCH v5 00/13] Enable I2C on SA8255p Qualcomm platforms
2026-02-26 3:52 UTC (8+ messages)
` [PATCH v5 05/13] soc: qcom: geni-se: Add resources activation/deactivation helpers
` [PATCH v5 07/13] soc: qcom: geni-se: Introduce helper APIs for performance control
[PATCH v2 0/6] Enable UFS support on Milos
2026-02-26 3:36 UTC (9+ messages)
` [PATCH v2 2/6] scsi: ufs: qcom,sc7180-ufshc: dt-bindings: Document the Milos UFS Controller
[PATCH RFC] arm64: dts: qcom: qcs6490-rb3gen2: Enable uPD720201 and GL3590
2026-02-26 3:35 UTC (4+ messages)
[PATCH v6 00/10] arm64: dts: qcom: kaanapali: Add more features
2026-02-26 3:27 UTC (12+ messages)
` [PATCH v6 01/10] arm64: dts: qcom: kaanapali: add coresight nodes
` [PATCH v6 02/10] arm64: dts: qcom: kaanapali: Add QUPv3 configuration for serial engines
` [PATCH v6 03/10] arm64: dts: qcom: kaanapali: Add TSENS and thermal zones
` [PATCH v6 04/10] arm64: dts: qcom: kaanapali: Add ADSP and CDSP for Kaanapali SoC
` [PATCH v6 05/10] arm64: dts: qcom: kaanapali: Add support for audio
` [PATCH v6 06/10] arm64: dts: qcom: kaanapali-mtp: Enable ADSP and CDSP
` [PATCH v6 07/10] arm64: dts: qcom: kaanapali-qrd: "
` [PATCH v6 08/10] arm64: dts: qcom: kaanapali-mtp: Add audio support (WSA8845, WCD9395, DMIC)
` [PATCH v6 09/10] arm64: dts: qcom: kaanapali: Add support for MM clock controllers for Kaanapali
` [PATCH v6 10/10] arm64: defconfig: Enable Kaanapali clock controllers
[PATCH] drm/msm: enable separate_gpu_kms by default
2026-02-26 3:23 UTC (4+ messages)
[PATCH net-next] MAINTAINERS: Update maintainer entry for QUALCOMM ETHQOS ETHERNET DRIVER
2026-02-26 3:20 UTC (2+ messages)
[PATCH 0/5] Add DSI display support for SC8280XP
2026-02-26 3:16 UTC (10+ messages)
` [PATCH 1/5] dt-bindings: display: msm-dsi-phy-7nm: Add SC8280XP
` [PATCH 2/5] dt-bindings: display/msm: dsi-controller-main: "
` [PATCH 4/5] drm/msm/dsi: Add DSI PHY configuration on SC8280XP
` [PATCH] arm64: dts: qcom: sc8280xp: Add dsi nodes "
[PATCH v3 0/3] Enable tertiary USB controller in OTG mode
2026-02-26 3:14 UTC (8+ messages)
` [PATCH v3 1/3] arm64: dts: qcom: lemans-evk: Enable GPIO expander interrupt for Lemans EVK
` [PATCH v3 2/3] arm64: dts: qcom: lemans: Add role-switch support and HS endpoint for tertiary USB controller
` [PATCH v3 3/3] arm64: dts: qcom: lemans-evk: Enable the "
[PATCH] firmware: qcom: scm: Allow QSEECOM on Glymur CRD
2026-02-26 2:29 UTC (2+ messages)
[PATCH V3] arm64: dts: qcom: qcs8300-ride: Enable Bluetooth support
2026-02-26 2:27 UTC (3+ messages)
[PATCH v2 0/5] media: qcom: camss: Add PIX support for CSID/VFE‑340
2026-02-26 0:16 UTC (7+ messages)
` [PATCH v2 1/5] media: qcom: camss: csid-340: Switch to generic CSID_CFG/CTRL registers
` [PATCH v2 2/5] media: camss: csid-340: Add VC-to-interface mapping
` [PATCH v2 3/5] media: qcom: camss: csid-340: Enable PIX interface routing
` [PATCH v2 4/5] media: qcom: camss: vfe-340: Proper client handling
` [PATCH v2 5/5] media: qcom: camss: vfe-340: Support for PIX client
[PATCH RFC 00/18] accel/qda: Introduce Qualcomm DSP Accelerator driver
2026-02-25 23:18 UTC (23+ messages)
` [PATCH RFC 01/18] accel/qda: Add Qualcomm QDA DSP accelerator driver docs
` [PATCH RFC 02/18] accel/qda: Add Qualcomm DSP accelerator driver skeleton
` [PATCH RFC 03/18] accel/qda: Add RPMsg transport for Qualcomm DSP accelerator
` [PATCH RFC 04/18] accel/qda: Add built-in compute CB bus for QDA and integrate with IOMMU
[PATCH v3 0/9] dmaengine: Add new API to combine configuration and descriptor preparation
2026-02-25 22:49 UTC (4+ messages)
[PATCH v2 0/3] Add support for the Samsung S6E8FCO display panel
2026-02-25 21:24 UTC (12+ messages)
` [PATCH v2 1/3] dt-bindings: display: panel: Add Samsung S6E8FCO
` [PATCH v2 2/3] drm: "
[PATCH v2 0/9] PCI: endpoint: Differentiate between disabled and reserved BARs
2026-02-25 20:27 UTC (4+ messages)
` [PATCH v2 1/9] PCI: endpoint: Introduce pci_epc_bar_type BAR_64BIT_UPPER
` [PATCH v2 6/9] PCI: dwc: Disable BARs in common code instead of in each glue driver
[PATCH] dt-bindings: display/msm: qcom,sm8750-mdss: Fix model typo
2026-02-25 19:42 UTC (2+ messages)
[PATCH] MAINTAINERS: add myself as a CAMSS patch reviewer
2026-02-25 17:37 UTC (3+ messages)
[PATCH] media: qcom: camss: Add debug message to camss-video format check
2026-02-25 17:26 UTC (5+ messages)
[PATCH 0/3] Add support for the Samsung S6E8FCO display panel
2026-02-25 16:35 UTC (4+ messages)
` [PATCH 3/3] arm64: dts: qcom: sm6125-xiaomi-laurel-sprout: Enable MDSS and add panel
[PATCH v8 00/18] Add dt-bindings and dtsi changes for CAMSS on x1e80100 silicon
2026-02-25 15:11 UTC (19+ messages)
` [PATCH v8 01/18] dt-bindings: media: qcom,x1e80100-camss: Assign correct main register bank to first address
` [PATCH v8 02/18] dt-bindings: media: qcom,x1e80100-camss: Convert from inline PHY definitions to PHY handles
` [PATCH v8 03/18] dt-bindings: media: qcom,x1e80100-camss: Add support for combo-mode endpoints
` [PATCH v8 04/18] dt-bindings: media: qcom,x1e80100-camss: Reduce iommus to five
` [PATCH v8 05/18] media: qcom: camss: Add legacy_phy flag to SoC definition structures
` [PATCH v8 06/18] media: qcom: camss: Add support for PHY API devices
` [PATCH v8 07/18] media: qcom: camss: Drop legacy PHY descriptions from x1e
` [PATCH v8 08/18] arm64: dts: qcom: x1e80100: Add CAMCC block definition
` [PATCH v8 09/18] arm64: dts: qcom: x1e80100: Add CCI definitions
` [PATCH v8 10/18] arm64: dts: qcom: x1e80100: Add MIPI CSI PHY nodes
` [PATCH v8 11/18] arm64: dts: qcom: x1e80100: Add CAMSS block definition
` [PATCH v8 12/18] arm64: dts: qcom: x1e80100-crd: Add pm8010 CRD pmic,id=m regulators
` [PATCH v8 13/18] arm64: dts: qcom: x1e80100-crd: Add ov08x40 RGB sensor on CSIPHY4
` [PATCH v8 14/18] arm64: dts: qcom: x1e80100-t14s: Add pm8010 camera PMIC with voltage levels for IR and RGB camera
` [PATCH v8 15/18] arm64: dts: qcom: x1e80100-t14s: Add on ov02c10 RGB sensor on CSIPHY4
` [PATCH v8 16/18] arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: Add pm8010 camera PMIC with voltage levels for IR and RGB camera
` [PATCH v8 17/18] arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: Add ov02c10 RGB sensor on CSIPHY4
` [PATCH v8 18/18] arm64: dts: qcom: x1e80100-dell-inspiron14-7441: Switch on CAMSS RGB sensor
[PATCH v2 0/2] phy: qcom-mipi-csi2: Add a CSI2 MIPI DPHY driver
2026-02-25 14:59 UTC (3+ messages)
` [PATCH v2 1/2] dt-bindings: phy: qcom: Add CSI2 C-PHY/DPHY schema
` [PATCH v2 2/2] phy: qcom-mipi-csi2: Add a CSI2 MIPI DPHY driver
[PATCH] arm64: dts: qcom: msm8939-asus-z00t: add ambient light and proximity sensor
2026-02-25 14:48 UTC (2+ messages)
[PATCH v3 00/12] Enable I2C on SA8255p Qualcomm platforms
2026-02-25 14:25 UTC (9+ messages)
` [PATCH v3 06/12] soc: qcom: geni-se: Introduce helper APIs for performance control
[PATCH v3] arm64: dts: qcom: sm8750: Add camera clock controller
2026-02-25 14:18 UTC (2+ messages)
[PATCH v6 0/4] Enable ICE clock scaling
2026-02-25 14:12 UTC (5+ messages)
` [PATCH v6 3/4] ufs: host: Add ICE clock scaling during UFS clock changes
[PATCH v2 0/2] phy: qcom-mipi-csi2: Add a CSI2 MIPI DPHY driver
2026-02-25 14:02 UTC (2+ messages)
=?y?q?=5BPATCH=200/3=5D=20media=3A=20qcom=3A=20camss=3A=20Add=20PIX=20support=20for=20CSID/VFE=E2=80=91340?=
2026-02-25 13:30 UTC (12+ messages)
` [PATCH 1/3] media: qcom: camss: vfe-340: Proper client handling
` [PATCH 3/3] media: qcom: camss: vfe-340: Support for PIX client
[PATCH v7 0/5] Add support to read the watchdog bootstatus from IMEM
2026-02-25 13:25 UTC (12+ messages)
` [PATCH v7 1/5] dt-bindings: sram: describe the IPQ5424 IMEM as mmio-sram
` [PATCH v7 2/5] arm64: dts: qcom: ipq5424: Add the IMEM node
` [PATCH v7 3/5] dt-bindings: watchdog: qcom-wdt: Document sram property
` [PATCH v7 4/5] watchdog: qcom: add support to get the bootstatus from IMEM
` [PATCH v7 5/5] arm64: dts: qcom: ipq5424: add support to get watchdog "
[PATCH v10] arm64: dts: qcom: qcs8300-ride: enable WLAN on qcs8300-ride
2026-02-25 12:27 UTC (2+ messages)
[PATCH v3 00/10] Fix up WCN6855 RFA power supply name
2026-02-25 12:23 UTC (11+ messages)
` [PATCH v3 01/10] dt-bindings: net: bluetooth: qualcomm: Fix WCN6855 regulator names
` [PATCH v3 02/10] arm64: dts: qcom: qcs615-ride: Fix BT RFA supply name
` [PATCH v3 03/10] arm64: dts: qcom: sc8280xp-crd: "
` [PATCH v3 04/10] arm64: dts: qcom: sc8280xp-gaokun3: "
` [PATCH v3 05/10] arm64: dts: qcom: sc8280xp-x13s: "
` [PATCH v3 06/10] arm64: dts: qcom: sc8280xp-blackrock: "
` [PATCH v3 07/10] arm64: dts: qcom: sm8450-hdk: "
` [PATCH v3 08/10] arm64: dts: qcom: x1-omnibook-x14: "
` [PATCH v3 09/10] arm64: dts: qcom: x1-zenbook-a14: "
` [PATCH v3 10/10] arm64: dts: qcom: lemans-ride-common: Fix up WCN power grid
[PATCH RFT v2 0/3] arm64: dts: qcom: glymur: Add USB support
2026-02-25 12:16 UTC (3+ messages)
` [PATCH RFT v2 3/3] arm64: dts: qcom: glymur-crd: Enable "
[PATCH 0/4] hwmon: Add Qualcomm PMIC BCL hardware monitor driver
2026-02-25 11:47 UTC (9+ messages)
` [PATCH 3/4] arm64: dts: qcom: pm7250b: Enable Qualcomm BCL device
[PATCH RFC net-next 0/7] net: stmmac: improve PCS support
2026-02-25 11:45 UTC (8+ messages)
` [PATCH RFC net-next 1/7] net: stmmac: add BASE-X support to integrated PCS
` [PATCH RFC net-next 2/7] net: stmmac: qcom-ethqos: enable 2500BASE-X
` [PATCH RFC net-next 3/7] net: stmmac: use integrated PCS for BASE-X modes
` [PATCH RFC net-next 4/7] net: stmmac: add struct stmmac_pcs_info
` [PATCH RFC net-next 5/7] net: stmmac: add support for reading inband SGMII status
` [PATCH RFC net-next 6/7] net: stmmac: configure SGMII AN control according to phylink
` [PATCH RFC net-next 7/7] net: stmmac: report PCS configuration changes
[PATCH] drm/msm/a6xx: Fix the bogus protect error on X2-85
2026-02-25 11:32 UTC (2+ messages)
[PATCH v5 0/9] Add support for handling PCIe M.2 Key E connectors in devicetree
2026-02-25 11:22 UTC (3+ messages)
` [PATCH v5 9/9] power: sequencing: pcie-m2: Create serdev device for WCN7850 bluetooth
[PATCH net-next 0/9] net: stmmac: qcom-ethqos: further serdes reorganisation
2026-02-25 10:59 UTC (15+ messages)
` [PATCH net-next 1/8] net: stmmac: qcom-ethqos: move ethqos_set_serdes_speed()
` [PATCH net-next 2/8] phy: qcom-sgmii-eth: add .set_mode() and .validate() methods
` [PATCH net-next 3/8] net: stmmac: qcom-ethqos: convert to use phy_set_mode_ext()
` [PATCH net-next 4/8] phy: qcom-sgmii-eth: remove .set_speed() implementation
` [PATCH net-next 5/8] phy: qcom-sgmii-eth: use PHY interface mode for SerDes settings
` [PATCH net-next 6/8] phy: qcom-sgmii-eth: remove qcom_dwmac_sgmii_phy_interface()
` [PATCH net-next 7/8] phy: qcom-sgmii-eth: relax order of .power_on() vs .set_mode*()
` [PATCH net-next 8/8] net: stmmac: qcom-ethqos: remove phy_set_mode_ext() after phy_power_on()
[PATCH 0/3] arm64: dts: qcom: Add base support for Eliza SoC and its MTP board
2026-02-25 10:55 UTC (3+ messages)
` [PATCH 1/3] dt-bindings: arm: qcom: Document Eliza "
[PATCH v9 03/11] dmaengine: qcom: bam_dma: implement support for BAM locking
2026-02-25 9:52 UTC (11+ messages)
[PATCH v14 0/3] Add Qualcomm Technologies, Inc. Talos EVK SMARC support
2026-02-25 9:46 UTC (4+ messages)
` [PATCH v14 3/3] arm64: dts: qcom: talos-evk: Add support for QCS615 talos evk board
[PATCH V5 0/3] Add UFS support for x1e80100 SoC
2026-02-25 8:58 UTC (3+ messages)
[PATCH 0/3] phy: qcom: edp: Add DP/eDP switch for phys
2026-02-25 8:00 UTC (11+ messages)
` [PATCH 2/3] phy: qcom: edp: Add per-version LDO configuration callback
` [PATCH 3/3] phy: qcom: edp: Add eDP phy mode switch support
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox