messages from 2026-02-24 09:50:00 to 2026-02-25 15:11:33 UTC [more...]
[PATCH v8 00/18] Add dt-bindings and dtsi changes for CAMSS on x1e80100 silicon
2026-02-25 15:11 UTC (5+ messages)
` [PATCH v8 01/18] dt-bindings: media: qcom,x1e80100-camss: Assign correct main register bank to first address
` [PATCH v8 02/18] dt-bindings: media: qcom,x1e80100-camss: Convert from inline PHY definitions to PHY handles
` [PATCH v8 03/18] dt-bindings: media: qcom,x1e80100-camss: Add support for combo-mode endpoints
` [PATCH v8 04/18] dt-bindings: media: qcom,x1e80100-camss: Reduce iommus to five
[PATCH v2 0/5] media: qcom: camss: Add PIX support for CSID/VFE‑340
2026-02-25 15:01 UTC (6+ messages)
` [PATCH v2 1/5] media: qcom: camss: csid-340: Switch to generic CSID_CFG/CTRL registers
` [PATCH v2 2/5] media: camss: csid-340: Add VC-to-interface mapping
` [PATCH v2 3/5] media: qcom: camss: csid-340: Enable PIX interface routing
` [PATCH v2 4/5] media: qcom: camss: vfe-340: Proper client handling
` [PATCH v2 5/5] media: qcom: camss: vfe-340: Support for PIX client
[PATCH v2 0/2] phy: qcom-mipi-csi2: Add a CSI2 MIPI DPHY driver
2026-02-25 14:59 UTC (3+ messages)
` [PATCH v2 1/2] dt-bindings: phy: qcom: Add CSI2 C-PHY/DPHY schema
` [PATCH v2 2/2] phy: qcom-mipi-csi2: Add a CSI2 MIPI DPHY driver
[PATCH] arm64: dts: qcom: msm8939-asus-z00t: add ambient light and proximity sensor
2026-02-25 14:48 UTC (2+ messages)
[PATCH v5 00/13] Enable I2C on SA8255p Qualcomm platforms
2026-02-25 14:38 UTC (7+ messages)
` [PATCH v5 05/13] soc: qcom: geni-se: Add resources activation/deactivation helpers
` [PATCH v5 07/13] soc: qcom: geni-se: Introduce helper APIs for performance control
[PATCH v3 00/12] Enable I2C on SA8255p Qualcomm platforms
2026-02-25 14:25 UTC (9+ messages)
` [PATCH v3 06/12] soc: qcom: geni-se: Introduce helper APIs for performance control
[PATCH RFC 00/18] accel/qda: Introduce Qualcomm DSP Accelerator driver
2026-02-25 14:20 UTC (10+ messages)
` [PATCH RFC 01/18] accel/qda: Add Qualcomm QDA DSP accelerator driver docs
` [PATCH RFC 02/18] accel/qda: Add Qualcomm DSP accelerator driver skeleton
[PATCH v3] arm64: dts: qcom: sm8750: Add camera clock controller
2026-02-25 14:18 UTC (2+ messages)
[PATCH v6 0/4] Enable ICE clock scaling
2026-02-25 14:12 UTC (5+ messages)
` [PATCH v6 3/4] ufs: host: Add ICE clock scaling during UFS clock changes
[PATCH v2 0/2] phy: qcom-mipi-csi2: Add a CSI2 MIPI DPHY driver
2026-02-25 14:02 UTC (2+ messages)
=?y?q?=5BPATCH=200/3=5D=20media=3A=20qcom=3A=20camss=3A=20Add=20PIX=20support=20for=20CSID/VFE=E2=80=91340?=
2026-02-25 13:30 UTC (12+ messages)
` [PATCH 1/3] media: qcom: camss: vfe-340: Proper client handling
` [PATCH 3/3] media: qcom: camss: vfe-340: Support for PIX client
[PATCH v7 0/5] Add support to read the watchdog bootstatus from IMEM
2026-02-25 13:25 UTC (12+ messages)
` [PATCH v7 1/5] dt-bindings: sram: describe the IPQ5424 IMEM as mmio-sram
` [PATCH v7 2/5] arm64: dts: qcom: ipq5424: Add the IMEM node
` [PATCH v7 3/5] dt-bindings: watchdog: qcom-wdt: Document sram property
` [PATCH v7 4/5] watchdog: qcom: add support to get the bootstatus from IMEM
` [PATCH v7 5/5] arm64: dts: qcom: ipq5424: add support to get watchdog "
[PATCH V3] arm64: dts: qcom: qcs8300-ride: Enable Bluetooth support
2026-02-25 12:27 UTC (2+ messages)
[PATCH v10] arm64: dts: qcom: qcs8300-ride: enable WLAN on qcs8300-ride
2026-02-25 12:27 UTC (2+ messages)
[PATCH v3 00/10] Fix up WCN6855 RFA power supply name
2026-02-25 12:23 UTC (11+ messages)
` [PATCH v3 01/10] dt-bindings: net: bluetooth: qualcomm: Fix WCN6855 regulator names
` [PATCH v3 02/10] arm64: dts: qcom: qcs615-ride: Fix BT RFA supply name
` [PATCH v3 03/10] arm64: dts: qcom: sc8280xp-crd: "
` [PATCH v3 04/10] arm64: dts: qcom: sc8280xp-gaokun3: "
` [PATCH v3 05/10] arm64: dts: qcom: sc8280xp-x13s: "
` [PATCH v3 06/10] arm64: dts: qcom: sc8280xp-blackrock: "
` [PATCH v3 07/10] arm64: dts: qcom: sm8450-hdk: "
` [PATCH v3 08/10] arm64: dts: qcom: x1-omnibook-x14: "
` [PATCH v3 09/10] arm64: dts: qcom: x1-zenbook-a14: "
` [PATCH v3 10/10] arm64: dts: qcom: lemans-ride-common: Fix up WCN power grid
[PATCH RFT v2 0/3] arm64: dts: qcom: glymur: Add USB support
2026-02-25 12:16 UTC (6+ messages)
` [PATCH RFT v2 1/3] dt-bindings: usb: qcom,dwc3: Allow high-speed interrupt on Glymur, Hamoa and Milos
` [PATCH RFT v2 3/3] arm64: dts: qcom: glymur-crd: Enable USB support
[PATCH] firmware: qcom: scm: Allow QSEECOM on Glymur CRD
2026-02-25 12:07 UTC
[PATCH v2 0/3] Add support for the Samsung S6E8FCO display panel
2026-02-25 11:50 UTC (2+ messages)
[PATCH 0/4] hwmon: Add Qualcomm PMIC BCL hardware monitor driver
2026-02-25 11:47 UTC (9+ messages)
` [PATCH 3/4] arm64: dts: qcom: pm7250b: Enable Qualcomm BCL device
[PATCH RFC net-next 0/7] net: stmmac: improve PCS support
2026-02-25 11:45 UTC (8+ messages)
` [PATCH RFC net-next 1/7] net: stmmac: add BASE-X support to integrated PCS
` [PATCH RFC net-next 2/7] net: stmmac: qcom-ethqos: enable 2500BASE-X
` [PATCH RFC net-next 3/7] net: stmmac: use integrated PCS for BASE-X modes
` [PATCH RFC net-next 4/7] net: stmmac: add struct stmmac_pcs_info
` [PATCH RFC net-next 5/7] net: stmmac: add support for reading inband SGMII status
` [PATCH RFC net-next 6/7] net: stmmac: configure SGMII AN control according to phylink
` [PATCH RFC net-next 7/7] net: stmmac: report PCS configuration changes
[PATCH v3 0/3] Enable tertiary USB controller in OTG mode
2026-02-25 11:34 UTC (6+ messages)
` [PATCH v3 1/3] arm64: dts: qcom: lemans-evk: Enable GPIO expander interrupt for Lemans EVK
` [PATCH v3 2/3] arm64: dts: qcom: lemans: Add role-switch support and HS endpoint for tertiary USB controller
` [PATCH v3 3/3] arm64: dts: qcom: lemans-evk: Enable the "
[PATCH] drm/msm/a6xx: Fix the bogus protect error on X2-85
2026-02-25 11:32 UTC (2+ messages)
[PATCH v5 0/9] Add support for handling PCIe M.2 Key E connectors in devicetree
2026-02-25 11:22 UTC (7+ messages)
` [PATCH v5 2/9] serdev: Add an API to find the serdev controller associated with the devicetree node
` [PATCH v5 9/9] power: sequencing: pcie-m2: Create serdev device for WCN7850 bluetooth
[PATCH 0/5] Add DSI display support for SC8280XP
2026-02-25 11:02 UTC (10+ messages)
` [PATCH 1/5] dt-bindings: display: msm-dsi-phy-7nm: Add SC8280XP
` [PATCH 2/5] dt-bindings: display/msm: dsi-controller-main: "
` [PATCH 3/5] dt-bindings: display: msm: Document DSI controller and DSI PHY on SC8280XP
` [PATCH 4/5] drm/msm/dsi: Add DSI PHY configuration "
` [PATCH] arm64: dts: qcom: sc8280xp: Add dsi nodes "
[PATCH net-next 0/9] net: stmmac: qcom-ethqos: further serdes reorganisation
2026-02-25 10:59 UTC (15+ messages)
` [PATCH net-next 1/8] net: stmmac: qcom-ethqos: move ethqos_set_serdes_speed()
` [PATCH net-next 2/8] phy: qcom-sgmii-eth: add .set_mode() and .validate() methods
` [PATCH net-next 3/8] net: stmmac: qcom-ethqos: convert to use phy_set_mode_ext()
` [PATCH net-next 4/8] phy: qcom-sgmii-eth: remove .set_speed() implementation
` [PATCH net-next 5/8] phy: qcom-sgmii-eth: use PHY interface mode for SerDes settings
` [PATCH net-next 6/8] phy: qcom-sgmii-eth: remove qcom_dwmac_sgmii_phy_interface()
` [PATCH net-next 7/8] phy: qcom-sgmii-eth: relax order of .power_on() vs .set_mode*()
` [PATCH net-next 8/8] net: stmmac: qcom-ethqos: remove phy_set_mode_ext() after phy_power_on()
[PATCH 0/3] arm64: dts: qcom: Add base support for Eliza SoC and its MTP board
2026-02-25 10:55 UTC (9+ messages)
` [PATCH 1/3] dt-bindings: arm: qcom: Document Eliza "
` [PATCH 2/3] arm64: dts: qcom: Introduce Eliza Soc base dtsi
` [PATCH 3/3] arm64: dts: qcom: eliza: Enable Eliza MTP board support
[PATCH v9 03/11] dmaengine: qcom: bam_dma: implement support for BAM locking
2026-02-25 9:52 UTC (11+ messages)
[PATCH v14 0/3] Add Qualcomm Technologies, Inc. Talos EVK SMARC support
2026-02-25 9:46 UTC (4+ messages)
` [PATCH v14 3/3] arm64: dts: qcom: talos-evk: Add support for QCS615 talos evk board
[PATCH] drm/msm: enable separate_gpu_kms by default
2026-02-25 9:28 UTC (3+ messages)
[PATCH v2 0/6] Enable UFS support on Milos
2026-02-25 9:06 UTC (8+ messages)
` [PATCH v2 2/6] scsi: ufs: qcom,sc7180-ufshc: dt-bindings: Document the Milos UFS Controller
[PATCH V5 0/3] Add UFS support for x1e80100 SoC
2026-02-25 8:58 UTC (3+ messages)
[PATCH 0/3] phy: qcom: edp: Add DP/eDP switch for phys
2026-02-25 8:00 UTC (11+ messages)
` [PATCH 2/3] phy: qcom: edp: Add per-version LDO configuration callback
` [PATCH 3/3] phy: qcom: edp: Add eDP phy mode switch support
[PATCH v6 00/10] arm64: dts: qcom: kaanapali: Add more features
2026-02-25 7:19 UTC (11+ messages)
` [PATCH v6 01/10] arm64: dts: qcom: kaanapali: add coresight nodes
` [PATCH v6 02/10] arm64: dts: qcom: kaanapali: Add QUPv3 configuration for serial engines
` [PATCH v6 03/10] arm64: dts: qcom: kaanapali: Add TSENS and thermal zones
` [PATCH v6 04/10] arm64: dts: qcom: kaanapali: Add ADSP and CDSP for Kaanapali SoC
` [PATCH v6 05/10] arm64: dts: qcom: kaanapali: Add support for audio
` [PATCH v6 06/10] arm64: dts: qcom: kaanapali-mtp: Enable ADSP and CDSP
` [PATCH v6 07/10] arm64: dts: qcom: kaanapali-qrd: "
` [PATCH v6 08/10] arm64: dts: qcom: kaanapali-mtp: Add audio support (WSA8845, WCD9395, DMIC)
` [PATCH v6 09/10] arm64: dts: qcom: kaanapali: Add support for MM clock controllers for Kaanapali
` [PATCH v6 10/10] arm64: defconfig: Enable Kaanapali clock controllers
[PATCH RFC] arm64: dts: qcom: qcs6490-rb3gen2: Enable uPD720201 and GL3590
2026-02-25 3:40 UTC (3+ messages)
[PATCH net-next 00/10] net: stmmac: qcom-ethqos: cleanups and re-organise SerDes handling
2026-02-25 1:50 UTC (6+ messages)
` [PATCH net-next 08/10] net: stmmac: qcom-ethqos: use phy interface mode for inband
[PATCH v3 0/4] soc: qcom: ice: Fix race between qcom_ice_probe() and of_qcom_ice_get()
2026-02-24 21:30 UTC (3+ messages)
` [PATCH v3 4/4] scsi: ufs: ufs-qcom: Remove NULL check from devm_of_qcom_ice_get()
[PATCH v2] remoteproc: qcom_wcnss: Fix handling the lack of PD regulators in v3
2026-02-24 18:45 UTC (3+ messages)
[PATCH v2] dt-bindings: arm: cpus: Deprecate Qualcomm generic compatibles
2026-02-24 18:26 UTC (2+ messages)
[PATCH 0/37] PCI/MSI: Enforce explicit IRQ vector management by removing devres auto-free
2026-02-24 16:20 UTC (8+ messages)
` [PATCH 01/37] PCI/MSI: Add Devres managed IRQ vectors allocation
[PATCH v5 0/4] drm/atomic: Allocate drm_private_state through a callback
2026-02-24 16:10 UTC (2+ messages)
` [PATCH v5 4/4] drm/atomic: Remove state argument to drm_atomic_private_obj_init
[PATCH v3 0/2] Add Xiaomi 12 Lite 5G (taoyao) device tree
2026-02-24 15:36 UTC (4+ messages)
` [PATCH v3 1/2] dt-bindings: arm: qcom: Add SM7325 Xiaomi 12 Lite 5G (taoyao)
` [PATCH v3 2/2] arm64: dts: qcom: Add Xiaomi 12 Lite 5G (taoyao) DTS
[PATCH v2 0/3] Add wiko-chuppito devictree
2026-02-24 14:30 UTC (6+ messages)
` [PATCH v2 1/3] dt-bindings: vendor-prefixes: add WIKO SAS
[PATCH 0/9] PCI: endpoint differentiate between disabled and reserved BARs
2026-02-24 13:54 UTC (5+ messages)
` [PATCH 1/9] PCI: endpoint: Introduce pci_epc_bar_type BAR_64BIT_UPPER
[PATCH v3 0/3] Add CAMSS support for SM6350
2026-02-24 13:43 UTC (6+ messages)
[PATCH v3 0/2] pmdomain: qcom: Add support for Eliza SoC
2026-02-24 13:41 UTC (4+ messages)
` [PATCH v3 2/2] pmdomain: qcom: rpmhpd: Add Eliza RPMh Power Domains
[PATCH v9] arm64: dts: qcom: qcs8300-ride: enable WLAN on qcs8300-ride
2026-02-24 13:34 UTC (4+ messages)
[PATCH v5 0/4] Enable ICE clock scaling
2026-02-24 13:31 UTC (11+ messages)
` [PATCH v5 2/4] soc: qcom: ice: Add OPP-based clock scaling support for ICE
[PATCH net-next] MAINTAINERS: Update maintainer entry for QUALCOMM ETHQOS ETHERNET DRIVER
2026-02-24 13:25 UTC (2+ messages)
[PATCH v5 0/6] clk: qcom: Add support for basic clocks providers on Eliza SoC
2026-02-24 13:19 UTC (3+ messages)
` [PATCH v5 5/6] clk: qcom: Add support for Global clock controller on Eliza
[PATCH v2 0/8] Add RemoteProc cooling support
2026-02-24 12:52 UTC (12+ messages)
` [PATCH v2 2/8] dt-bindings: thermal: Add qcom,qmi-cooling yaml bindings
[PATCH v2 0/5] arm64: dts: arduino-imola: add support for sound
2026-02-24 12:28 UTC (8+ messages)
` [PATCH v2 1/5] clk: qcom: fix SM6115 lpasscc register offset
` [PATCH v2 3/5] arm64: dts: qcom: agatti: add LPASS devices
` [PATCH v2 4/5] arm64: dts: arduino-imola: add support for sound
[PATCH v4 0/2] interconnect: qcom: Add Eliza support
2026-02-24 11:43 UTC (3+ messages)
` [PATCH v4 1/2] dt-bindings: interconnect: document the RPMh Network-On-Chip interconnect in Eliza SoC
` [PATCH v4 2/2] interconnect: qcom: Add Eliza interconnect provider driver
[net-next PATCH v5 0/3] Grab IPA IMEM slice through DT
2026-02-24 11:34 UTC (4+ messages)
` [PATCH net-next v5 1/3] dt-bindings: sram: qcom,imem: Allow modem-tables subnode
` [PATCH net-next v5 2/3] dt-bindings: net: qcom,ipa: Add sram property for describing IMEM slice
` [PATCH net-next v5 3/3] net: ipa: Grab IMEM slice base/size from DTS
[PATCH] crypto: qce - Replace snprintf("%s") with strscpy
2026-02-24 11:30 UTC (2+ messages)
[PATCH] ARM: dts: qcom: msm8960: expressatt: Add coreriver,tc360-touchkey
2026-02-24 11:28 UTC (8+ messages)
[PATCH] soc: qcom: pd-mapper: Simplify code using of_root to get root device tree node
2026-02-24 11:26 UTC (2+ messages)
[PATCH v2 00/14] ASoC: qcom: q6dsp: few fixes and enhancements
2026-02-24 10:16 UTC (5+ messages)
` [PATCH v2 11/14] ASoC: qcom: qdapm-lpass-dai: correct the error message
` [PATCH v2 14/14] ASoC: qcom: q6apm: Add support for early buffer mapping on DSP
[PATCH v3 0/4] arm64: qcom: x1-vivobook-s15: add X1P42100 variant, restructure dts files
2026-02-24 9:58 UTC (3+ messages)
` [PATCH v3 4/4] arm64: dts: qcom: x1-vivobook-s15: add Purwa-compatible device tree
[PATCH 0/6] Support for the Pixel 3a XL with the Tianma panel
2026-02-24 9:55 UTC (5+ messages)
` [PATCH 3/6] drm/panel: Add Novatek/Tianma NT37700F panel
[PATCH 0/3] arm64: dts: qcom: msm8916-samsung-coreprimeltevzw: add device tree
2026-02-24 9:52 UTC (5+ messages)
` [PATCH 1/3] arm64: dts: qcom: msm8916-samsung-fortuna: Move SM5504 from rossa and refactor MUIC
` [PATCH 3/3] arm64: dts: qcom: msm8916-samsung-coreprimeltevzw: add device tree
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox