messages from 2026-06-01 13:19:13 to 2026-06-02 10:27:00 UTC [more...]
[PATCH 1/2] dt-bindings: media: qcom,sm8550-iris: Allow IOVA reservation memory-region
2026-06-02 10:26 UTC (4+ messages)
` [PATCH 2/2] arm64: dts: qcom: hamoa: Reserve low IOVA range for Iris
[PATCH] iommu/arm-smmu: pass smmu->dev to report_iommu_fault
2026-06-02 10:25 UTC (3+ messages)
[PATCH] clk: qcom: gcc-ipq5424: drop the CLK_IGNORE_UNUSED flag
2026-06-02 10:06 UTC (6+ messages)
[PATCH v9 0/4] Add Qualcomm extended CTI support
2026-06-02 9:53 UTC (6+ messages)
` [PATCH v9 4/4] coresight: cti: expose banked sysfs registers for Qualcomm extended CTI
[PATCH v2] arm64: dts: qcom: glymur-crd: merge duplicate &pmh0101_gpios node extensions
2026-06-02 9:48 UTC
[PATCH v7 0/5] misc: fastrpc: Add missing bug fixes
2026-06-02 9:41 UTC (8+ messages)
` [PATCH v7 1/5] misc: fastrpc: Fix initial memory allocation for Audio PD memory pool
` [PATCH v7 2/5] misc: fastrpc: Remove buffer from list prior to unmap operation
` [PATCH v7 3/5] misc: fastrpc: Fail Audio PD init when reserved memory is missing
` [PATCH v7 4/5] misc: fastrpc: Allocate entire reserved memory for Audio PD in probe
` [PATCH v7 5/5] misc: fastrpc: Allow fastrpc_buf_free() to accept NULL
[PATCH] dt-bindings: PCI: qcom,pcie-ipq9574: Add IPQ9650 compatible
2026-06-02 9:36 UTC
[PATCH 0/2] Add EPSS L3 provider support on Qualcomm Shikra SoC
2026-06-02 9:27 UTC (4+ messages)
` [PATCH 1/2] dt-bindings: interconnect: qcom,shikra-epss-l3: Add EPSS L3 DT binding
[PATCH 0/2] Add support for the REFGEN in the IPQ9650 SoC
2026-06-02 9:22 UTC (3+ messages)
` [PATCH 1/2] regulator: dt-bindings: qcom,sdm845-refgen-regulator: Document IPQ9650
` [PATCH 2/2] regulator: qcom-refgen: add support for the IPQ9650 SoC
[PATCH v6 00/15] drm/msm/dp: Prerequisite cleanup for upcoming MST support
2026-06-02 9:11 UTC (16+ messages)
` [PATCH v6 01/15] drm/msm/dp: remove cached drm_edid from panel
` [PATCH v6 02/15] drm/msm/dp: drop deprecated .mode_set() and use .atomic_enable
` [PATCH v6 03/15] drm/msm/dp: move mode setup into msm_dp_panel_init_panel_info()
` [PATCH v6 04/15] drm/msm/dp: split msm_dp_ctrl_config_ctrl() into link parts and stream parts
` [PATCH v6 05/15] drm/msm/dp: extract MISC1_MISC0 configuration into a separate function
` [PATCH v6 06/15] drm/msm/dp: split link setup from source params
` [PATCH v6 07/15] drm/msm/dp: move the pixel clock control to its own API
` [PATCH v6 08/15] drm/msm/dp: break up dp_display_enable into two parts
` [PATCH v6 09/15] drm/msm/dp: re-arrange dp_display_disable() into functional parts
` [PATCH v6 10/15] drm/msm/dp: allow dp_ctrl stream APIs to use any panel passed to it
` [PATCH v6 11/15] drm/msm/dp: split dp_ctrl_off() into stream and link parts
` [PATCH v6 12/15] drm/msm/dp: simplify link and clock disable sequence
` [PATCH v6 13/15] drm/msm/dp: make bridge helpers use dp_display to allow re-use
` [PATCH v6 14/15] drm/msm/dp: separate dp_display_prepare() into its own API
` [PATCH v6 15/15] drm/msm/dp: pass panel to display enable/disable helpers
[PATCH 0/2] Add support for the QMP PCIe PHYs in Qualcomm IPQ9650
2026-06-02 9:10 UTC (3+ messages)
` [PATCH 1/2] dt-bindings: phy: qcom,ipq8074-qmp-pcie: document IPQ9650 QMP PCIe PHYs
` [PATCH 2/2] phy: qcom: qmp-pcie: Add IPQ9650 PCIe PHY support
[PATCH v5 0/6] media: qcom: iris: add support for decoding 10bit formats
2026-06-02 8:39 UTC (7+ messages)
` [PATCH v5 1/6] media: qcom: iris: add helpers for 8bit and "
` [PATCH v5 2/6] media: qcom: iris: add QC10C & P010 buffer size calculations
` [PATCH v5 3/6] media: qcom: iris: gen2: add support for 10bit decoding
` [PATCH v5 4/6] media: qcom: iris: vdec: update size and stride calculations for 10bit formats
` [PATCH v5 5/6] media: qcom: iris: vdec: update find_format to handle 8bit and "
` [PATCH v5 6/6] media: qcom: iris: vdec: allow GEN2 decoding into 10bit format
[PATCH 00/23] driver core: count references of the platform device's fwnode, not OF node
2026-06-02 8:24 UTC (5+ messages)
` [PATCH 09/23] of: platform: use platform_device_set_of_node()
` [PATCH 22/23] reset: rzg2l: use platform_device_set_of_node_from_dev()
[PATCH 0/6] arm64: dts: qcom: sc8280xp: set GPI DMA channels according to DSDT
2026-06-02 8:14 UTC (7+ messages)
` [PATCH 1/6] arm64: dts: qcom: sc8280xp-crd: set GPI DMA channels
` [PATCH 2/6] arm64: dts: qcom: sc8280xp-huawei-gaokun3: "
` [PATCH 3/6] arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: "
` [PATCH 4/6] arm64: dts: qcom: sc8280xp-microsoft-arcata: "
` [PATCH 5/6] arm64: dts: qcom: sc8280xp-microsoft-blackrock: "
` [PATCH 6/6] arm64: dts: qcom: sc8280xp: remove GPI DMA channel masks
[PATCH v8 0/2] phy: qcom-mipi-csi2: Add a CSI2 MIPI DPHY driver
2026-06-02 8:18 UTC (3+ messages)
` [PATCH v8 2/2] "
[PATCH v5 0/7] clk: qcom: Add common clkref support and migrate Glymur and Mahua
2026-06-02 8:02 UTC (8+ messages)
` [PATCH v5 1/7] dt-bindings: clock: qcom: Move glymur TCSR to own binding and add mahua
` [PATCH v5 2/7] clk: qcom: Add generic clkref_en support
` [PATCH v5 3/7] clk: qcom: tcsrcc-glymur: Migrate tcsr_pcie_N_clkref_en to clk_ref common helper
` [PATCH v5 4/7] clk: qcom: tcsrcc-glymur: Add Mahua QREF regulator support
` [PATCH v5 5/7] arm64: dts: qcom: glymur: Add QREF regulator supplies to TCSR
` [PATCH v5 6/7] arm64: dts: qcom: mahua: "
` [PATCH v5 7/7] arm64: dts: qcom: mahua: Switch pcie5_phy ref clock to RPMH_CXO_CLK
[PATCH v5 00/15] drm/msm/dp: Prerequisite cleanup for upcoming MST support
2026-06-02 8:03 UTC (7+ messages)
` [PATCH v5 04/15] drm/msm/dp: split msm_dp_ctrl_config_ctrl() into link parts and stream parts
` [PATCH v5 10/15] drm/msm/dp: allow dp_ctrl stream APIs to use any panel passed to it
[PATCH 0/7] arm64: dts: qcom: enable WiFi/BT on SM8350 HDK
2026-06-02 8:00 UTC (14+ messages)
` [PATCH 2/7] wifi: ath11k: enable support for WCN6851
` [PATCH 3/7] regulator: dt-bindings: qcom,qca6390-pmu: document WCN6851
` [PATCH 4/7] dt-bindings: bluetooth: qcom,wcn6855-bt: "
` [PATCH 5/7] arm64: dts: qcom: sm8350: expand UART18 to 4 pins config
` [PATCH 6/7] arm64: dts: qcom: sm8350: modernize PCIe entries
` [PATCH 7/7] arm64: dts: qcom: sm8350-hdk: describe WiFi/BT chip
[PATCH v6 0/6] Add binding and driver for Kaanapali SoCCP
2026-06-02 7:49 UTC (4+ messages)
` [PATCH v6 5/6] remoteproc: qcom: pas: Add late attach support for subsystems
[PATCH v2 0/4] pinctrl: qcom: spmi-gpio: Add bidirectional level-shifter function support
2026-06-02 7:29 UTC (9+ messages)
` [PATCH v2 1/4] soc: qcom: rpmh: Allow non-child devices to issue write commands
` [PATCH v2 2/4] dt-bindings: pinctrl: qcom,pmic-gpio: Add level-shifter function
[PATCH 0/8] ras: aest: extend AEST support to Device Tree frontend
2026-06-02 7:29 UTC (2+ messages)
[PATCH 1/3] dt-bindings: clock: qcom: add mmcc-msm8660 clock IDs
2026-06-02 7:14 UTC (6+ messages)
` [PATCH 2/3] dt-bindings: reset: qcom: add mmcc-msm8660 reset IDs
` [PATCH 3/3] clk: qcom: add MSM8x60 MMCC driver
` [PATCH 0/3] clk: qcom: add MSM8x60 Multimedia Clock Controller (MMCC) driver
[PATCH] arm64: dts: qcom: monaco-arduino-monza: Add QCNFA725B support
2026-06-02 7:10 UTC
[PATCH v4] arm64: dts: qcom: monaco-arduino-monza: Add QCNFA725B support
2026-06-02 7:05 UTC
[PATCH] dmaengine: qcom: gpi: set DMA_PRIVATE capability
2026-06-02 7:03 UTC
[PATCH v4] arm64: dts: qcom: monaco-arduino-monza: Add QCNFA725B WiFi support
2026-06-02 7:03 UTC (6+ messages)
[PATCH 0/3] IPQ5018: Add and enable GEPHY RX and TX clocks
2026-06-02 6:54 UTC (7+ messages)
` [PATCH 1/3] dt-bindings: net: qca,ipq5018: Split IPQ5018 PHY bindings from ar803x
` [PATCH 2/3] arm64: qcom: ipq5018: Add GEPHY RX and TX clocks
` [PATCH 3/3] net: phy: qca,at803x: add RX and TX clock management for IPQ5018 PHY
[PATCH v2] dt-bindings: interconnect: qcom-bwmon: Add Maili cpu-bwmon compatible
2026-06-02 6:54 UTC
[PATCH v2] dt-bindings: misc: qcom,fastrpc: Add Maili FastRPC compatible
2026-06-02 6:51 UTC
[PATCH v2 0/4] IPQ5018: Add and enable GEPHY RX and TX clocks
2026-06-02 6:50 UTC (5+ messages)
` [PATCH v2 1/4] dt-bindings: net: ethernet-phy: move clocks property to invidivual PHY bindings
` [PATCH v2 2/4] dt-bindings: net: qca,ar803x: Add clocks property for IPQ5018 PHY
` [PATCH v2 3/4] arm64: qcom: ipq5018: Add GEPHY RX and TX clocks
` [PATCH v2 4/4] net: phy: at803x: add RX and TX clock management for IPQ5018 PHY
[PATCH 1/2] clk: qcom: gcc-msm8660: register CE2 H clock
2026-06-02 6:49 UTC (4+ messages)
` [PATCH 2/2] clk: qcom: gcc-msm8660: register PLL4_VOTE for LPASS
[PATCH] clk: qcom: clk-pll: reject vote enable on orphan parent
2026-06-02 6:29 UTC
[PATCH] misc: fastrpc: take fl->lock when moving mmaps on interrupted invoke
2026-06-02 5:29 UTC
[PATCH v10 0/3] Add support to read the watchdog bootstatus from IMEM
2026-06-02 5:09 UTC (2+ messages)
[PATCH 1/2] clk: qcom: gdsc: add LEGACY_FOOTSWITCH support for MSM8x60
2026-06-02 5:08 UTC (2+ messages)
` [PATCH 2/2] clk: qcom: gdsc: add RPM_ALWAYS_ON flag
[PATCH 0/3] Enable icc-clk support for Qualcomm IPQ9650
2026-06-02 5:08 UTC (2+ messages)
[PATCH 1/3] clk: qcom: lcc-msm8960: check regmap_read/regmap_write return values in probe
2026-06-02 4:50 UTC (3+ messages)
` [PATCH 2/3] clk: qcom: lcc-msm8960: serialise probe and block sysfs rebind
` [PATCH 3/3] clk: qcom: lcc-msm8960: re-apply PLL4 mux on resume
[PATCH v8 0/6] arm64: dts: qcom: Support AYN QCS8550 Devices
2026-06-02 4:53 UTC (2+ messages)
[PATCH] PCI: qcom: Handle mixed PERST#/PHY DT configuration
2026-06-02 4:34 UTC (3+ messages)
[PATCH] net: qrtr: fix node refcount leak on ctrl packet alloc failure
2026-06-02 3:10 UTC (2+ messages)
[PATCH] arm64: dts: qcom: sdm670-google: add lpi reserved gpios
2026-06-02 2:17 UTC
[PATCH 00/16] lib/cpumask: get rid of cpumap_print_to_pagebuf()
2026-06-02 0:38 UTC (7+ messages)
` [PATCH 05/16] ACPI: pad: Use sysfs_emit() for idlecpus show
` [PATCH 11/16] nvdimm: Use sysfs_emit() for cpumask show callback
` [PATCH 14/16] powercap: intel_rapl: Use sysfs_emit() for cpumask show
[PATCH v5 0/5] media: qcom: camss: Add SM8750 support
2026-06-02 0:32 UTC (6+ messages)
` [PATCH v5 1/5] media: dt-bindings: Add CAMSS device for SM8750
` [PATCH v5 2/5] media: qcom: camss: Add SM8750 compatible camss driver
` [PATCH v5 3/5] media: qcom: camss: csiphy: Add support for v2.3.0 two-phase CSIPHY
` [PATCH v5 4/5] media: qcom: camss: csid: Add support for CSID 980
` [PATCH v5 5/5] media: qcom: camss: vfe: Add support for VFE 980
[PATCH 0/3] usb: dwc3: add snps,reinit-phy-on-resume quirk for USB2 PHY power loss during S3
2026-06-01 23:12 UTC (4+ messages)
` [PATCH 1/3] dt-bindings: usb: dwc3: document snps,reinit-phy-on-resume
` [PATCH 2/3] usb: dwc3: add reinit-phy-on-resume quirk
` [PATCH 3/3] arm64: dts: qcom: x1e80100-microsoft-romulus: add phy-reinit-on-resume
[PATCH v2 0/6] ASoC: qcom: qdsp6: add push/pull module support
2026-06-01 21:37 UTC (3+ messages)
` [PATCH v2 2/6] ASoC: qcom: q6apm: return error code to consumers on failures
[PATCH] media: qcom: camss: csid: Consolidate CSI2_RX_CFG0_PHY_SEL_BASE_IDX definition
2026-06-01 20:29 UTC (5+ messages)
[PATCH v2 0/4] PCI: Introduce pci_suspend_retains_context() API
2026-06-01 19:16 UTC (2+ messages)
[PATCH 0/2] Bluetooth: hci_qca: fix NULL pointer dereferences for non-serdev devices
2026-06-01 19:10 UTC (2+ messages)
[PATCH v4 0/6] media: qcom: iris: add support for decoding 10bit formats
2026-06-01 18:59 UTC (4+ messages)
[PATCH v3 00/12] clk: qcom: Add DISPCC and GPUCC support for the Qualcomm Shikra SoC
2026-06-01 18:21 UTC (13+ messages)
` [PATCH v3 01/12] clk: qcom: gcc-qcm2290: Keep the critical clocks always-on from probe
` [PATCH v3 02/12] dt-bindings: clock: qcom,qcm2290-dispcc: Add DSI1 PHY and sleep clocks
` [PATCH v3 03/12] dt-bindings: clock: qcom: Add Qualcomm Shikra Display clock controller
` [PATCH v3 04/12] dt-bindings: clock: qcom: Add Qualcomm Shikra GPU "
` [PATCH v3 05/12] clk: qcom: dispcc-qcm2290: Move to the latest common qcom_cc_probe() model
` [PATCH v3 06/12] clk: qcom: dispcc-qcm2290: Switch to DT index based clk lookup
` [PATCH v3 07/12] clk: qcom: dispcc-qcm2290: Update GDSC *wait_val values and flags
` [PATCH v3 08/12] clk: qcom: gpucc-qcm2290: Move to the latest common qcom_cc_probe() model
` [PATCH v3 09/12] clk: qcom: gpucc-qcm2290: Park RCG's clk source at XO during disable
` [PATCH v3 10/12] clk: qcom: gpucc-qcm2290: Update GDSC *wait_val values and flags
` [PATCH v3 11/12] clk: qcom: Add support for Qualcomm GPU Clock Controller on Shikra
` [PATCH v3 12/12] arm64: dts: qcom: agatti: Add DSI1 PHY and sleep clocks to DISPCC node
[PATCH v3 0/2] Add support for Microsoft Surface Pro 12in
2026-06-01 18:18 UTC (2+ messages)
` (subset) "
[PATCH v2 0/3] PCI: qcom: Add support for Eliza
2026-06-01 17:29 UTC (4+ messages)
` [PATCH v2 1/3] dt-bindings: phy: sc8280xp-qmp-pcie: Document Eliza PCIe phy
` [PATCH v2 2/3] dt-bindings: PCI: qcom,pcie-sm8550: Add Eliza compatible
` [PATCH v2 3/3] phy: qcom: qmp-pcie: Add QMP PCIe PHY support for Eliza
[PATCH v3 00/10] ARM: qcom: msm8960: enable WCNSS (Bluetooth & Wi-Fi)
2026-06-01 13:36 UTC (4+ messages)
` [PATCH v3 04/10] clk: qcom: clk-rpm: add msm8960 compatible
[PATCH WIP v5 0/9] media: camss: Add support for C-PHY configuration on Qualcomm platforms
2026-06-01 17:02 UTC (13+ messages)
` [PATCH WIP v5 1/9] media: qcom: camss: csiphy: Introduce PHY configuration
` [PATCH WIP v5 2/9] media: qcom: camss: csiphy-3ph: Use odd bits for configuring C-PHY lanes
` [PATCH WIP v5 6/9] media: qcom: camss: csiphy-3ph: Update Gen2 v1.1 MIPI CSI-2 C-PHY init
` [PATCH WIP v5 9/9] media: qcom: camss: Enable C-PHY where available
[PATCH v4 0/3] Add support and enable the debug UART in the Pixel 3a and Pixel 3a XL
2026-06-01 16:55 UTC (4+ messages)
` [PATCH v4 1/3] arm64: dts: qcom: sdm670: add default uart pinctrl nodes
` [PATCH v4 2/3] arm64: dts: qcom: sdm670: add debug uart soc node
` [PATCH v4 3/3] arm64: dts: qcom: sdm670-google-common: enable debug uart
[PATCH v3 0/3] Add support and enable the debug UART in the Pixel 3a and Pixel 3a XL
2026-06-01 16:54 UTC (4+ messages)
` [PATCH v3 1/3] arm64: dts: qcom: sdm670: add default uart pinctrl nodes
` [PATCH v3 2/3] arm64: dts: qcom: sdm670: add debug uart soc node
` [PATCH v3 3/3] arm64: dts: qcom: sdm670-google-common: enable debug uart
[PATCH V1 0/2] scsi: ufs: ufs-qcom: Fix OCP issue during powerdown
2026-06-01 16:17 UTC (3+ messages)
` [PATCH V1 2/2] scsi: ufs: ufs-qcom: Enable SKIP DEVICE RESET Quirk
[PATCH v4 0/5] media: qcom: camss: Add SM8750 support
2026-06-01 15:42 UTC (6+ messages)
` [PATCH v4 1/5] media: dt-bindings: Add CAMSS device for SM8750
` [PATCH v4 2/5] media: qcom: camss: Add SM8750 compatible camss driver
` [PATCH v4 3/5] media: qcom: camss: csiphy: Add support for v2.3.0 two-phase CSIPHY
` [PATCH v4 4/5] media: qcom: camss: csid: Add support for CSID 980
` [PATCH v4 5/5] media: qcom: camss: vfe: Add support for VFE 980
[PATCH v14 0/5] media: qcom: camss: Add Kaanapali support
2026-06-01 15:31 UTC (6+ messages)
` [PATCH v14 1/5] media: dt-bindings: Add CAMSS device for Kaanapali
` [PATCH v14 2/5] media: qcom: camss: Add Kaanapali compatible camss driver
` [PATCH v14 3/5] media: qcom: camss: csiphy: Add support for v2.4.0 two-phase CSIPHY
` [PATCH v14 4/5] media: qcom: camss: csid: Add support for CSID gen4
` [PATCH v14 5/5] media: qcom: camss: vfe: Add support for VFE gen4
[PATCH v8 0/2] Add Xiaomi 12 Lite 5G (taoyao) device tree
2026-06-01 15:07 UTC (3+ messages)
` [PATCH v8 1/2] dt-bindings: arm: qcom: Add SM7325 Xiaomi 12 Lite 5G (taoyao)
` [PATCH v8 2/2] arm64: dts: qcom: Add Xiaomi 12 Lite 5G (taoyao) DTS
[PATCH 0/8] Add CAMSS and IMX577 sensor support for Shikra EVK
2026-06-01 14:58 UTC (12+ messages)
` [PATCH 3/8] media: qcom: camss: add support for QCM2390 camss
` [PATCH 4/8] arm64: dts: qcom: shikra: Add CAMSS node
improve the kmem_cache_alloc_bulk API v2
2026-06-01 14:39 UTC (10+ messages)
` [PATCH] mm/slab: improve kmem_cache_alloc_bulk
[PATCH 0/6] Add CAMSS support for Qualcomm Glymur
2026-06-01 14:38 UTC (15+ messages)
` [PATCH 1/6] dt-bindings: media: Add bindings for qcom,glymur-camss
` [PATCH 5/6] media: qcom: camss: enable vfe for Glymur
` [PATCH 6/6] media: qcom: camss: Enumerate resources "
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox