messages from 2026-08-24 05:20:10 to 2026-08-24 13:06:15 UTC [more...]
[PATCH v5 00/13] Add initial support for Qualcomm SM7250 SoC
2026-08-24 13:04 UTC (8+ messages)
` [PATCH v5 01/13] dt-bindings: arm: qcom,ids: Add SoC ID for SM7250
` [PATCH v5 02/13] soc: qcom: socinfo: Add SM7250 SoC ID
` [PATCH v5 03/13] dt-bindings: clock: Add SM7250 global clock controller
` [PATCH v5 04/13] clk: qcom: Add Global Clock Controller (GCC) driver for SM7250
` [PATCH v5 05/13] dt-bindings: clock: qcom,rpmhcc: Document RPMHCC compatible "
` [PATCH v5 06/13] clk: qcom: rpmh: Add SM7250 rpmh clocks
` [PATCH v5 07/13] dt-bindings: power: qcom,rpmhpd: Document RPMh power domain for SM7250
[PATCH] serial: qcom-geni: Drop unsafe rx_buf realloc from setup_fifos()
2026-08-24 12:56 UTC (2+ messages)
[PATCH] spi: qcom-geni: rename setup_fifo_params() to setup_spi_params() and make it void
2026-08-24 12:55 UTC (2+ messages)
[PATCH v2] tee: qcomtee: fix kernel-doc warnings
2026-08-24 12:51 UTC (2+ messages)
[REGRESSION] PCIe/qcom: on-board WCN7850 link stuck in Polling on X1E80100 (Surface Pro 11)
2026-08-24 12:46 UTC (3+ messages)
[PATCH v5 3/4] drm/prime: use dma_buf_fd_install() to preserve export tracing
2026-08-24 12:42 UTC (3+ messages)
` [PATCH v7 0/4] dma-buf: fix fd leak when copy_to_user() fails after fd_install()
[PATCH v3 0/3] firmware: arm_scmi: fix module auto-loading
2026-08-24 12:22 UTC (3+ messages)
` [PATCH v3 1/3] module: add SCMI device table alias support
[PATCH v3 00/47] clk: qcom: Tie CX power domains to GCCs
2026-08-24 11:54 UTC (48+ messages)
` [PATCH v3 01/47] dt-bindings: clock: qcom: gcc-sdm845: Add CX power domain
` [PATCH v3 02/47] dt-bindings: clock: qcom: gcc-sm8150: "
` [PATCH v3 03/47] dt-bindings: clock: qcom: gcc-sm8250: "
` [PATCH v3 04/47] dt-bindings: clock: qcom: gcc-sm8350: "
` [PATCH v3 05/47] dt-bindings: clock: qcom: gcc-sm8450: "
` [PATCH v3 06/47] dt-bindings: clock: qcom: qcs615-gcc: "
` [PATCH v3 07/47] dt-bindings: clock: qcom: sm8550-gcc: "
` [PATCH v3 08/47] dt-bindings: clock: qcom: sm8650-gcc: "
` [PATCH v3 09/47] dt-bindings: clock: qcom: sm8750-gcc: "
` [PATCH v3 10/47] clk: qcom: gcc-eliza: Tie the CX power domain to controller
` [PATCH v3 11/47] clk: qcom: gcc-kaanapali: "
` [PATCH v3 12/47] clk: qcom: gcc-qcs615: "
` [PATCH v3 13/47] clk: qcom: gcc-qcs8300: "
` [PATCH v3 14/47] clk: qcom: gcc-qdu1000: "
` [PATCH v3 15/47] clk: qcom: gcc-sa8775p: "
` [PATCH v3 16/47] clk: qcom: gcc-sar2130p: "
` [PATCH v3 17/47] clk: qcom: gcc-sc7180: "
` [PATCH v3 18/47] clk: qcom: gcc-sc7280: "
` [PATCH v3 19/47] clk: qcom: gcc-sdm670: "
` [PATCH v3 20/47] clk: qcom: gcc-sdm845: "
` [PATCH v3 21/47] clk: qcom: gcc-sdx75: "
` [PATCH v3 22/47] clk: qcom: gcc-sm4450: "
` [PATCH v3 23/47] clk: qcom: gcc-sm6350: "
` [PATCH v3 24/47] clk: qcom: gcc-sm8150: "
` [PATCH v3 25/47] clk: qcom: gcc-sm8250: "
` [PATCH v3 26/47] clk: qcom: gcc-sm8350: "
` [PATCH v3 27/47] clk: qcom: gcc-sm8450: "
` [PATCH v3 28/47] clk: qcom: gcc-sm8550: "
` [PATCH v3 29/47] clk: qcom: gcc-sm8650: "
` [PATCH v3 30/47] clk: qcom: gcc-sm8750: "
` [PATCH v3 31/47] clk: qcom: gcc-x1e80100: "
` [PATCH v3 32/47] arm64: dts: qcom: kaanapali: Add GCC CX power domain
` [PATCH v3 33/47] arm64: dts: qcom: monaco: "
` [PATCH v3 34/47] arm64: dts: qcom: qdu1000: "
` [PATCH v3 35/47] arm64: dts: qcom: sar2130p: "
` [PATCH v3 36/47] arm64: dts: qcom: sdm670: "
` [PATCH v3 37/47] arm64: dts: qcom: sdx75: "
` [PATCH v3 38/47] arm64: dts: qcom: sm4450: "
` [PATCH v3 39/47] arm64: dts: qcom: sm6350: "
` [PATCH v3 40/47] arm64: dts: qcom: sm8150: "
` [PATCH v3 41/47] arm64: dts: qcom: sm8250: "
` [PATCH v3 42/47] arm64: dts: qcom: sm8350: "
` [PATCH v3 43/47] arm64: dts: qcom: sm8450: "
` [PATCH v3 44/47] arm64: dts: qcom: sm8550: "
` [PATCH v3 45/47] arm64: dts: qcom: sm8650: "
` [PATCH v3 46/47] arm64: dts: qcom: sm8750: "
` [PATCH v3 47/47] arm64: dts: qcom: talos: "
[PATCH 0/7] soc: qcom: geni: Derive SE clock configuration from OPP table on SA8255P
2026-08-24 11:52 UTC (8+ messages)
` [PATCH 3/7] soc: qcom: geni-se: Add helper to set SE clock rate via OPP
` [PATCH 4/7] serial: qcom-geni: Use geni_se_set_rate() for source clock configuration
` [PATCH 5/7] spi: qcom-geni: Use geni_se_set_rate() for setting source clock frequency
[PATCH 0/2] firmware: qcom: scm locking improvements
2026-08-24 11:35 UTC (3+ messages)
` [PATCH 1/2] firmware: qcom: scm: Introduce new locking mechanism for SCM driver
` [PATCH 2/2] firmware: qcom: scm: Allow the SMC request to freeze and kill
[PATCH] usb: typec: tbt: Correct swapped TBT adapter type values
2026-08-24 11:31 UTC (3+ messages)
[PATCH v2 0/3] arm64: dts: qcom: shikra: Add CYPD6129/CYPD6229 Type-C controller support
2026-08-24 11:30 UTC (3+ messages)
` [PATCH v2 2/3] usb: typec: ucsi: ccg: Add support for cypd6129/cypd6229
[PATCH 0/4] drm/msm/dp, phy: qcom: improve DP Type-C reconnect handling
2026-08-24 11:28 UTC (5+ messages)
` [PATCH 1/4] phy: qcom: qmp-combo: delay Type-C mux switch while DP PHY is initializing
` [PATCH 2/4] drm/msm/dp: clear force_link_train flag when link training succeeds
` [PATCH 3/4] drm/msm/dp: skip LTTPR init when no LTTPRs are present
` [PATCH 4/4] drm/msm/dp: continue link training downgrade when cable is still plugged
[PATCH 00/70] drm/crtc: Convert all drivers to atomic_create_state and remove reset
2026-08-24 11:28 UTC (2+ messages)
[PATCH 0/2] i2c: Add I2C High-Speed mode support for qcom-geni
2026-08-24 11:25 UTC (3+ messages)
` [PATCH 1/2] dmaengine: qcom-gpi: Add I2C High-Speed mode configuration support
` [PATCH 2/2] i2c: qcom-geni: Add support for I2C High-Speed mode
[PATCH] usb: typec: qcom-pmic: cancel reset_work on stop
2026-08-24 11:22 UTC (2+ messages)
[PATCH v3 0/3] misc: fastrpc: fix ADSP duplicate session creation
2026-08-24 10:49 UTC (4+ messages)
` [PATCH v3 1/3] misc: fastrpc: iterate CB nodes manually instead of of_platform_populate
` [PATCH v3 2/3] misc: fastrpc: move ADSP duplicate session creation to the driver
` [PATCH v3 3/3] dt-bindings: misc: qcom,fastrpc: deprecate qcom,nsessions
[PATCH v12] misc: fastrpc: Allocate entire reserved memory for Audio PD in probe
2026-08-24 10:39 UTC (3+ messages)
[PATCH] clk: qcom: ipq-cmn-pll: keep the CMN block bus clocks enabled
2026-08-24 10:28 UTC (8+ messages)
[PATCH v9 0/2] Enable sdhc inline crypto engine for kodiak and monaco
2026-08-24 10:18 UTC (5+ messages)
[PATCH v3 0/9] ASoC: qcom: Add QAIF driver for Shikra audio platform
2026-08-24 10:10 UTC (16+ messages)
` [PATCH v3 1/9] ASoC: dt-bindings: qcom,qaif-cpu: Add binding
` [PATCH v3 2/9] ASoC: qcom: Add QAIF shared data structures and variant interface
` [PATCH v3 3/9] ASoC: qcom: Add QAIF hardware register map
` [PATCH v3 4/9] ASoC: qcom: Add QAIF CPU DAI ops, regmap, DT parsing and platform init
` [PATCH v3 5/9] ASoC: soc-core: Add snd_soc_of_xlate_dai_name() generic helper
` [PATCH v3 6/9] ASoC: qcom: Add QAIF PCM operations
` [PATCH v3 7/9] ASoC: qcom: Add QAIF IRQ handling, suspend/resume and platform register
` [PATCH v3 8/9] ASoC: qcom: Add Shikra QAIF support
` [PATCH v3 9/9] MAINTAINERS: Add Qualcomm QAIF driver entry
[PATCH] arm64: dts: qcom: sdm845-sony-xperia-tama: Fix Bluetooth UART pinctrl
2026-08-24 10:09 UTC (4+ messages)
[PATCH v7 0/2] i2c: Add dynamic transfer timeout based on message length and frequency
2026-08-24 10:06 UTC (6+ messages)
` [PATCH v7 1/2] i2c: core: Add i2c_update_timeout() helper for dynamic transfer timeouts
` [PATCH v7 2/2] i2c: qcom-geni: Add dynamic transfer timeout based on transfer length and frequency
[PATCH] media: qcom: iris: add firmware debug logging support
2026-08-24 10:05 UTC (3+ messages)
[PATCH 00/12] iommu: qcom_iommu: implement support for instances on MSM8974
2026-08-24 10:04 UTC (4+ messages)
[PATCH v6 0/2] Add LPASS VA CSR HeartBeat pulse clock support
2026-08-24 9:52 UTC (3+ messages)
` [PATCH v6 2/2] clk: qcom: Add LPASS VA CSR heartbeat pulse clock
[PATCH v3 0/3] media: i2c: Add imx576 camera sensor driver
2026-08-24 9:46 UTC (3+ messages)
` [PATCH v3 3/3] arm64: dts: qcom: sm7225-fairphone-fp4: Add Sony IMX576 front camera support
[PATCH 2/2] arm64: dts: qcom: monaco-pmics: Enable PMIC MBG thermal monitor
2026-08-24 9:45 UTC (2+ messages)
[PATCH 1/2] arm64: dts: qcom: lemans-pmics: Enable PMIC MBG thermal monitor
2026-08-24 9:45 UTC (2+ messages)
[PATCH v2 00/14] Enable USB3 for Qualcomm IPQ5018 and IPQ5332
2026-08-24 9:38 UTC (14+ messages)
` [PATCH v2 04/14] arm64: dts: qcom: ipq5332: Flatten usb controller node
` [PATCH v2 05/14] arm64: dts: qcom: ipq5018: "
` [PATCH v2 08/14] arm64: dts: qcom: ipq5332: Add clocks required for USB3 support
` [PATCH v2 09/14] arm64: dts: qcom: ipq5018: "
` [PATCH v2 13/14] arm64: dts: qcom: ipq5018: Enable USB Super-Speed PHY
[PATCH v2 0/2] I2C SCL counter updates for Qualcomm IPQ5424 SoC
2026-08-24 9:24 UTC (7+ messages)
` [PATCH v2 1/2] i2c: qcom-geni: update frequency table to fix timing parameters
` [PATCH v2 2/2] i2c: qcom-geni: add I2C frequency table for 32 MHz firmware-based SEs
[PATCH v5 0/2] arm64: dts: qcom: Introduce support for Monaco-ac-sku Evaluation Kit
2026-08-24 9:22 UTC (3+ messages)
` [PATCH v5 2/3] arm64: dts: qcom: monaco: Add monaco-ac EVK board
[PATCH v4 00/13] Add initial support for Qualcomm SM7250 SoC
2026-08-24 9:18 UTC (10+ messages)
` [PATCH v4 06/13] clk: qcom: rpmh: Add SM7250 rpmh clocks
` [PATCH v4 08/13] pmdomain: qcom: rpmhpd: Add RMPh power domains for SM7250
` [PATCH v4 12/13] dt-bindings: cpufreq: qcom-hw: Document SM7250 cpufreq hardware
` [PATCH v4 13/13] arm64: dts: qcom: Add SM7250 devicetree file
[PATCH v2 0/4] power: reset: add NVMEM recorder provider for PSCRR
2026-08-24 9:17 UTC (4+ messages)
` [PATCH v2 4/4] arm64: dts: qcom: lemans: Add PSCRR NVMEM recorder node
[PATCH v6 0/9] Improve Qualcomm EUD driver and platform support
2026-08-24 9:14 UTC (3+ messages)
` [PATCH v6 3/9] usb: misc: qcom_eud: add per-path High-Speed PHY control
[PATCH v2 00/13] Add initial support for Qualcomm SM7250 SoC
2026-08-24 9:11 UTC (5+ messages)
` [PATCH v2 06/13] clk: qcom: rpmh: Add SM7250 rpmh clocks
` [PATCH v2 08/13] pmdomain: qcom: rpmhpd: Add RMPh power domains for SM7250
[PATCH v2 0/4] arm: ras: Add DT frontend support for ARM RAS
2026-08-24 9:11 UTC (4+ messages)
` [PATCH v2 3/4] arm64: dts: qcom: monaco: add RAS error source nodes
[PATCH v3 0/3] clk: qcom: gcc-glymur: Tie the CX power domain to controller
2026-08-24 9:04 UTC (7+ messages)
[PATCH 0/3] nfc: st-nci: Fairphone 5 NFC bring-up (ST21NFCD)
2026-08-24 8:57 UTC (4+ messages)
` [PATCH v2 "
` [PATCH v2 3/3] arm64: dts: qcom: qcm6490-fairphone-fp5: add ST21NFCD NFC
[PATCH] pinctrl: qcom: nord: Split QUP1 SE2/SE3 into lane-pair functions
2026-08-24 8:44 UTC (4+ messages)
[PATCH] remoteproc: qcom_q6v5_mss: Don't require PAS for memory protection
2026-08-24 8:26 UTC (3+ messages)
[PATCH 0/2] clk: qcom: Add EMAC CNOC APB clocks for Nord SoC
2026-08-24 8:12 UTC (5+ messages)
` [PATCH 1/2] dt-bindings: clock: qcom: Add EMAC CNOC APB clocks for Nord
` [PATCH 2/2] clk: qcom: segcc-nord: Add EMAC CNOC APB clocks for Nord SoC
[PATCH v12 0/6] Enable ICE clock scaling
2026-08-24 8:05 UTC (11+ messages)
` [PATCH v12 1/6] soc: qcom: ice: Add OPP-based clock scaling support for ICE
` [PATCH v12 2/6] ufs: host: Add ICE clock scaling during UFS clock changes
` [PATCH v12 3/6] mmc: sdhci-msm: Set ICE clk to TURBO at sdhci ICE init
` [PATCH v12 5/6] arm64: dts: qcom: monaco: Add OPP-table for ICE UFS and ICE SDHC nodes
` [PATCH v12 6/6] arm64: dts: qcom: lemans: Add OPP-table for ICE UFS device node
[PATCH v3 00/15] Add initial support for Qualcomm Kuno SoC
2026-08-24 7:59 UTC (15+ messages)
` [PATCH v3 01/15] soc: qcom: geni-se: allow selection on 32-bit ARM Qualcomm SoCs
` [PATCH v3 03/15] pmdomain: qcom: rpmhpd: Add power domains for Kuno
` [PATCH v3 05/15] clk: qcom: clk-rpmh: Add support for Kuno RPMh clocks
` [PATCH v3 07/15] interconnect: qcom: Add Kuno interconnect provider driver
` [PATCH v3 09/15] pinctrl: qcom: Add Kuno pinctrl driver
` [PATCH v3 11/15] clk: qcom: Add Global Clock Controller driver for Kuno
` [PATCH v3 15/15] ARM: dts: qcom: Add initial device tree for Kuno SoC
[PATCH] arm64: dts: qcom: pm8005: Add pmic cooling maps
2026-08-24 7:36 UTC (3+ messages)
[PATCH 0/2] arm64: dts: qcom: sc8280xp-microsoft-blackrock: DP audio + 4-lane altmode
2026-08-24 7:34 UTC (5+ messages)
` [PATCH 1/2] arm64: dts: qcom: sc8280xp-microsoft-blackrock: enable DisplayPort audio
` [PATCH 2/2] arm64: dts: qcom: sc8280xp-microsoft-blackrock: enable 4-lane DP altmode
[PATCH] drm/msm/dpu: advertise linear-only modifiers on platforms without UBWC
2026-08-24 7:31 UTC (2+ messages)
[PATCH] PCI: qcom: Add register dump support for PCIe Link Down events
2026-08-24 7:17 UTC (3+ messages)
[PATCH v2 0/2] rpmsg: glink: Fix version handshake race against a late RX interrupt
2026-08-24 7:05 UTC (3+ messages)
` [PATCH v2 1/2] rpmsg: glink: Split protocol start out of native_probe
` [PATCH v2 2/2] rpmsg: glink: Request the RX interrupt already enabled
[PATCH] arm64: dts: qcom: glymur: Fix missing SMMU stream IDs for ADSP
2026-08-24 6:51 UTC (3+ messages)
[PATCH 0/3] Add Himax HX83112A support for Fairphone 4 touchscreen
2026-08-24 6:49 UTC (3+ messages)
` [PATCH 3/3] arm64: dts: qcom: sm7225-fairphone-fp4: Enable touchscreen
[PATCH] arm64: dts: qcom: sm7325-nothing-spacewar: Add ath11k calibration-variant
2026-08-24 6:45 UTC (4+ messages)
[PATCH v3 0/2] PCI: qcom: Implement shutdown() to avoid SMMU/NoC errors on reboot
2026-08-24 6:42 UTC (4+ messages)
` [PATCH v3 1/2] PCI: dwc: Force L2 link entry on shutdown/reboot without D3cold check
` [PATCH v3 2/2] PCI: qcom: Implement shutdown() callback
[PATCH 0/5] Add support for USB phys in IPQ9650
2026-08-24 6:37 UTC (6+ messages)
` [PATCH 1/5] dt-bindings: phy: qcom,qmp-usb: Add IPQ9650 USB3 PHY
` [PATCH 2/5] dt-bindings: phy: qcom,usb-snps-femto-v2: Add IPQ9650 compatible
` [PATCH 3/5] phy: qcom: qmp-usb: Add IPQ9650 USB3 PHY configuration
` [PATCH 4/5] phy: qcom: snps-femto-v2: Move PHY init registers to config tables
` [PATCH 5/5] phy: qcom: snps-femto-v2: Add IPQ9650 support
[PATCH v5 0/3] Enable DW9714V camera focus coils on SHIFT 6MQ
2026-08-24 6:32 UTC (3+ messages)
` [PATCH v5 3/3] arm64: dts: qcom: sdm845-shift-axolotl: Add actuator for second rear camera
[PATCH v2 00/11] ASoC: qcom: Add QAIF driver for Shikra audio platform
2026-08-24 6:30 UTC (14+ messages)
` [PATCH v2 01/11] dt-bindings: sound: qcom,qaif-cpu: Add binding
` [PATCH v2 06/11] ASoC: qcom: Add generic of_xlate_dai_name helper and use it in lpass-cpu and qaif-cpu
` [PATCH v2 07/11] ASoC: qcom: Add QAIF regmap, DT parsing and platform init
` [PATCH v2 10/11] ASoC: qcom: Add Shikra QAIF support
[PATCH v4 0/3] arm64: dts: qcom: Refine device support for Xiaomi Redmi 5A
2026-08-24 6:29 UTC (7+ messages)
` [PATCH v4 1/3] arm64: dts: qcom: msm8917-xiaomi-riva: Enable debug UART console
` [PATCH v4 2/3] arm64: dts: qcom: msm8917-xiaomi-riva: Add GPIO haptic vibrator
` [PATCH v4 3/3] arm64: dts: qcom: msm8917-xiaomi-riva: Add notification LED support
[PATCH] drm/msm/adreno: fix autosuspend cleanup during teardown
2026-08-24 6:17 UTC (3+ messages)
[PATCH] drm/msm/adreno: Only check for PAS when a zap shader is present
2026-08-24 6:12 UTC (2+ messages)
[PATCH] phy: qualcomm: qmp-combo: update DP PHY PLL programming on Glymur
2026-08-24 5:59 UTC (3+ messages)
[PATCH v2 0/5] media: iris: Fix DMA coherency, power-off ordering, and frame interval issues
2026-08-24 5:21 UTC (7+ messages)
` [PATCH v2 2/5] dt-bindings: media: qcom,sc7280-venus: Add dma-coherent property
` [PATCH v2 3/5] arm64: dts: qcom: sc7280: Add dma-coherent property into venus node
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox