messages from 2026-09-04 02:42:39 to 2026-09-05 10:58:09 UTC [more...]
[PATCH v6 00/15] QRTR Multi-endpoint support
2026-09-05 10:55 UTC (6+ messages)
` [PATCH v6 13/15] net: qrtr: limit endpoint range to 16 bits on 32-bit machines
[PATCH] soc: qcom: dcc: Remove the debugfs ABI document left behind by the driver removal
2026-09-05 10:25 UTC
[PATCH 0/7] arm64: dts: qcom: IdeaCentre Mini 01Q8X10 Hamoa + Purwa
2026-09-05 9:29 UTC (8+ messages)
` [PATCH 1/7] dt-bindings: arm: qcom: Distinguish IdeaCentre Mini 01Q8X10 SKUs
` [PATCH 2/7] arm64: dts: qcom: Split IdeaCentre Mini into a common DTSI
` [PATCH 3/7] arm64: dts: qcom: Add Purwa IdeaCentre Mini 01Q8X10
` [PATCH 4/7] arm64: dts: qcom: ideacentre-mini: Build the Hamoa EL2 DTB
` [PATCH 5/7] arm64: dts: qcom: ideacentre-mini: Fix the second M.2 3V3 rail
` [PATCH 6/7] arm64: dts: qcom: ideacentre-mini: Wire up DP sound names and VA macro
` [PATCH 7/7] arm64: dts: qcom: ideacentre-mini: Drop the unused USB MP port
[PATCH 0/4] dma: use designated initializers for acpi_device_id
2026-09-05 8:12 UTC (7+ messages)
` [PATCH 1/4] dma: dw: "
` [PATCH 2/4] dma: loongson: use named "
` [PATCH 3/4] dma: qcom: "
` [PATCH 4/4] dma: xgene-dmac: "
drm/msm: unrecoverable a8xx hang-recovery loop on Glymur ("cx gdsc didn't collapse"); killing the offending client does not stop the loop
2026-09-05 6:54 UTC (3+ messages)
[PATCH v2 00/11] drm/panel: Add 5 DDIC panel drivers for 14 Sony phones
2026-09-05 5:54 UTC (4+ messages)
[PATCH 0/4] clk: qcom: glymur: Add rpmh LNBB clks support and update UFS clk ops
2026-09-05 5:52 UTC (8+ messages)
` [PATCH 1/4] dt-bindings: clock: qcom: Add TCSR_UFS_CLKREF_EN definition
` [PATCH 2/4] clk: qcom: rpmhcc: Add LNBB clocks support for Glymur
` [PATCH 3/4] clk: qcom: gcc-glymur: Use clk_regmap_phy_mux_ops for GCC UFS muxes
` [PATCH 4/4] clk: qcom: gcc-glymur: use shared ops for GCC UFS RCGs
[PATCH] firmware: qcom: tzmem: use sleepable variant of DO_ONCE()
2026-09-05 3:04 UTC
[PATCH v2 0/3] arm64: dts: qcom: hamoa-crd: Introduce thermistor-based CPU throttling
2026-09-05 3:05 UTC (4+ messages)
` [PATCH v2 1/3] arm64: dts: qcom: hamoa-pmics: Mark pmk8550_vadc thermal sensor provider
` [PATCH v2 2/3] arm64: dts: qcom: hamoa-crd: Add thermal control
` [PATCH v2 3/3] arm64: defconfig: Enable PMIC5 Gen3 ADC thermal monitor
[PATCH v3 0/5] watchdog: qcom: Support NMI pretimeout warnings
2026-09-05 1:52 UTC (20+ messages)
` [PATCH v3 1/5] genirq: Synchronize in-flight handlers during NMI teardown
` [PATCH v3 3/5] genirq: Export NMI APIs
` [PATCH v3 5/5] watchdog: qcom: Register pretimeout interrupt as NMI
[PATCH v3 0/3] arm64: dts: qcom: Add LVDS display overlays for lemans, monaco and rb3gen2
2026-09-05 1:30 UTC (4+ messages)
` [PATCH v3 1/3] arm64: dts: qcom: lemans-evk: Add LVDS display overlay
` [PATCH v3 2/3] arm64: dts: qcom: monaco-evk: "
` [PATCH v3 3/3] arm64: dts: qcom: qcs6490-rb3gen2: "
[PATCH v2] PCI: qcom: Add register dump support for PCIe Link Down events
2026-09-05 1:29 UTC
[PATCH v5 0/3] PCI: qcom: Implement shutdown() to avoid SMMU/NoC errors on reboot
2026-09-05 0:48 UTC (4+ messages)
` [PATCH v5 1/3] PCI: host-common: Fix early bus-walk exit in d3cold_possible()
` [PATCH v5 2/3] PCI: dwc: Force L2 link entry on shutdown/reboot without D3cold check
` [PATCH v5 3/3] PCI: qcom: Implement shutdown() callback
[PATCH v4 0/2] power: supply: qcom_smbx: add SMB5 support
2026-09-05 0:17 UTC (4+ messages)
` [PATCH v4 2/2] "
[PATCH v6 0/5] Modify interrupt handling for eUSB2 Phy targets
2026-09-04 23:07 UTC (10+ messages)
` [PATCH v6 2/5] include: linux: phy: Add phy attribute "type" and associated helpers
` [PATCH v6 3/5] phy: snps-eusb2: Set phy type to EUSB2
` [PATCH v6 4/5] phy: qcom: m31-eusb2: "
` [PATCH v6 5/5] usb: dwc3: qcom: Modify interrupt handling for eUSB2 Phy targets
[PATCH net] net: wwan: qcom_bam_dmux: account network packets
2026-09-04 22:24 UTC (2+ messages)
[PATCH 0/4] Add supply names for PM6350 RPMh regulators on Fairphone 4
2026-09-04 18:45 UTC (2+ messages)
` (subset) "
[PATCH v3 0/2] spi: qcom-geni: Add shutdown and panic notifier support
2026-09-04 17:02 UTC (2+ messages)
[PATCH net-next 0/9] net: stmmac: qcom-ethqos: add Shikra EMAC support
2026-09-04 21:05 UTC (2+ messages)
[PATCH v5 00/13] arm64: dts: qcom: Add x1e/Hamoa camera DTSI
2026-09-04 19:55 UTC (18+ messages)
` [PATCH v5 01/13] dt-bindings: media: qcom,x1e80100-camss: Describe iommu entries
` [PATCH v5 02/13] dt-bindings: media: qcom,x1e80100-camss: Make vdd-csiphy supplies optional
` [PATCH v5 03/13] arm64: dts: qcom: x1e80100: Add CAMCC block definition
` [PATCH v5 04/13] arm64: dts: qcom: x1e80100: Add CCI definitions
` [PATCH v5 05/13] arm64: dts: qcom: x1e80100: Add CAMSS block definition
` [PATCH v5 06/13] arm64: dts: qcom: x1e80100-crd: Add pm8010 CRD pmic,id=m regulators
` [PATCH v5 07/13] arm64: dts: qcom: x1e80100-crd: Add ov08x40 RGB sensor on CSIPHY4
` [PATCH v5 08/13] arm64: dts: qcom: x1e80100-t14s: Add pm8010 camera PMIC with voltage levels for IR and RGB camera
` [PATCH v5 09/13] arm64: dts: qcom: x1e80100-t14s: Add on ov02c10 RGB sensor on CSIPHY4
` [PATCH v5 10/13] arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: Add pm8010 camera PMIC with voltage levels for IR and RGB camera
` [PATCH v5 11/13] arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: Add l7b_2p8 voltage regulator for "
` [PATCH v5 12/13] arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: Add ov02c10 RGB sensor on CSIPHY4
` [PATCH v5 13/13] arm64: dts: qcom: x1e80100-dell-inspiron14-7441: Switch on CAMSS RGB sensor
[PATCH v2 0/3] arm64: dts: qcom: Add LVDS display overlays for lemans, monaco and rb3gen2
2026-09-04 19:37 UTC (4+ messages)
` [PATCH v2 1/3] arm64: dts: qcom: lemans-evk: Add LVDS display overlay
[PATCH] spi: spi-qpic-snand: publish the ECC context to snandc->qspi
2026-09-04 18:38 UTC (5+ messages)
[PATCH net v4] net: wwan: qcom_bam_dmux: account network packets
2026-09-04 18:37 UTC
[PATCH v3 0/5] PCI/pwrctrl: tc9563: introduce support for embedded GPIO controller
2026-09-04 17:15 UTC (6+ messages)
` [PATCH v3 1/5] dt-bindings: PCI: toshiba,tc9563: Document "
` [PATCH v3 2/5] gpio: tc9563: Add support for the "
` [PATCH v3 3/5] PCI/pwrctrl: tc9563: Add GPIO auxiliary device support
` [PATCH v3 4/5] PCI/pwrctrl: tc9563: Switch per-port reset to GPIO descriptor API
` [PATCH v3 5/5] arm64: dts: qcom: qcs6490-rb3gen2: Enable TC9563 embedded GPIO controller
[PATCH v2] Bluetooth: btqcomsmd: destroy RPMsg endpoints before freeing hci_dev
2026-09-04 16:56 UTC (2+ messages)
[PATCH v2 0/5] pmdomain/cpuidle-psci: Fix behaviours for CPU PM domains
2026-09-04 16:26 UTC (3+ messages)
` [PATCH v2 2/5] pmdomain: core: Allow a non-CPU device in a CPU PM domain to do power on
[PATCH 00/26] dmaengine: Remove redundant error messages on IRQ request failure
2026-09-04 16:02 UTC (3+ messages)
` [PATCH 00/26] dmaengine: Remove redundant dev_err()/dev_err_probe() calls
[PATCH v6 00/11] arm64: dts: monaco-arduino-monza: Add support for LGA WiFi/BT module
2026-09-04 15:42 UTC (12+ messages)
` [PATCH v6 01/11] Bluetooth: hci_qca: Add M.2 Bluetooth device support using pwrseq
` [PATCH v6 02/11] Bluetooth: hci_qca: Rename 'power_ctrl_enabled' to 'bt_en_available'
` [PATCH v6 03/11] power: sequencing: Add pwrseq_is_controllable() API
` [PATCH v6 04/11] power: sequencing: pcie-m2: Report power controllability
` [PATCH v6 05/11] power: sequencing: qcom-wcn: "
` [PATCH v6 06/11] Bluetooth: hci_qca: Set 'bt_en_available' based on pwrseq "
` [PATCH v6 07/11] Bluetooth: hci_qca: Embed bt_power in struct qca_serdev
` [PATCH v6 08/11] Bluetooth: hci_qca: Support QCA2066 on M.2 connector via pwrseq
` [PATCH v6 09/11] Bluetooth: hci_qca: Flatten struct qca_power into struct qca_serdev
` [PATCH v6 10/11] dt-bindings: connector: pcie-m2-e: Add vendor LGA connector compatible
` [PATCH v6 11/11] arm64: dts: qcom: monaco-arduino-monza: Add QCA2066 M.2 WiFi/BT support
[PATCH v3] tty: serial: qcom_geni: don't ida_free() the console port line
2026-09-04 15:19 UTC
[PATCH v2 0/2] Add automotive SMEM hardening for Qualcomm platforms
2026-09-04 15:18 UTC (3+ messages)
` [PATCH v2 1/2] soc: qcom: smem: add boundary checks for partitions
` [PATCH v2 2/2] soc: qcom: smem: ignore multi remote host partitions
[PATCH v5 00/15] Add initial support for Qualcomm Kuno SoC
2026-09-04 14:51 UTC (4+ messages)
` [PATCH v5 12/15] dt-bindings: interrupt-controller: qcom,pdc: Add Kuno compatible string
[PATCH v2 4/5] PCI/pwrctrl: tc9563: switch per-port reset to GPIO descriptor API
2026-09-04 14:35 UTC (3+ messages)
[PATCH] soc: qcom: smd-rpm: Add trace events for SMD-RPM messages
2026-09-04 14:23 UTC
[PATCH v24 00/12] Implement PSCI reboot mode driver for PSCI resets
2026-09-04 13:59 UTC (4+ messages)
[PATCH v2 0/5] PCI/pwrctrl: tc9563: introduce support for embedded GPIO controller
2026-09-04 13:59 UTC (6+ messages)
` [PATCH v2 3/5] PCI/pwrctrl: tc9563: add GPIO auxiliary device support
[PATCH] drm/msm/a6xx: check pm_runtime_resume_and_get() during resume
2026-09-04 12:55 UTC
[PATCH v4 0/2] Add pinctrl support for MSM8952
2026-09-04 12:55 UTC (3+ messages)
` [PATCH v4 1/2] dt-bindings: pinctrl: qcom: Add MSM8952 pinctrl
` [PATCH v4 2/2] pinctrl: qcom: Add MSM8952 tlmm pinctrl driver
[PATCH] mhi: fix typo "intented" in comment
2026-09-04 12:47 UTC
[PATCH v15 0/4] Add phy_get_by_of_node and devm helper
2026-09-04 12:40 UTC (6+ messages)
` [PATCH v15 1/4] phy: core: Fix use-after-free in phy_get paths
` [PATCH v15 2/4] phy: core: Add phy_get_by_of_node()
` [PATCH v15 3/4] phy: core: Add devm_phy_get_by_of_node()
` [PATCH v15 4/4] media: qcom: camss: Add support for PHY API devices
[PATCH v14 0/4] Add phy_get_by_of_node and devm helper
2026-09-04 12:39 UTC (5+ messages)
` [PATCH v14 1/4] phy: core: Fix use-after-free in phy_get paths
[PATCH v6 0/3] arm64: dts: qcom: eliza: Add CDSP support and enable it on MTP and CQS SoM
2026-09-04 12:21 UTC (4+ messages)
` [PATCH v6 1/3] arm64: dts: qcom: eliza: Describe the CDSP remoteproc
` [PATCH v6 2/3] arm64: dts: qcom: eliza-mtp: Enable "
` [PATCH v6 3/3] arm64: dts: qcom: eliza-cqs-som: "
[PATCH v2] tty: serial: qcom_geni: don't ida_free() the console port line
2026-09-04 12:21 UTC (3+ messages)
[PATCH] ASoC: fix typos in comments
2026-09-04 12:16 UTC (2+ messages)
[PATCH v3 0/2] Add pinctrl support for MSM8952
2026-09-04 12:15 UTC (3+ messages)
` [PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add MSM8952 pinctrl
` [PATCH v3 2/2] pinctrl: qcom: Add MSM8952 tlmm pinctrl driver
[PATCH 1/2] drm/msm: fix typos in comments
2026-09-04 12:05 UTC (2+ messages)
` [PATCH 2/2] drm: fix repeated words "
[PATCH] interconnect: qcom: use 64-bit SMD RPM bus votes
2026-09-04 11:55 UTC
[PATCH] crypto: fix typos in comments
2026-09-04 11:43 UTC
[PATCH v3 0/6] Add audio support for QCS6490 Rubik Pi 3
2026-09-04 10:02 UTC (7+ messages)
` [PATCH v3 1/6] ASoC: dt-bindings: es8316: Document jack detect inversion
` [PATCH v3 2/6] ASoC: dt-bindings: qcom,sm8250: Add RubikPi 3 sound card
` [PATCH v3 3/6] ASoC: qcom: common: Add generic headset jack helpers
` [PATCH v3 4/6] ASoC: qcom: sc8280xp: Add per-DAI board configuration
` [PATCH v3 5/6] ASoC: qcom: sc8280xp: Add RubikPi 3 sound card support
` [PATCH v3 6/6] arm64: dts: qcom: qcs6490-rubikpi3: Add audio support
[PATCH] interconnect: fix typo "commited" in comments
2026-09-04 11:16 UTC
[PATCH] drm/msm/dsi: round the byte clock rate after reparenting to the PHY PLL
2026-09-04 10:22 UTC (2+ messages)
[PATCH] crypto: qce - simplify control flow in register functions
2026-09-04 10:01 UTC (2+ messages)
[PATCH v2 0/6] arm64: dts: qcom: nord: Add remoteproc and PMIC support
2026-09-04 10:00 UTC (9+ messages)
` [PATCH v2 1/6] arm64: dts: qcom: nord: Add support for ADSP and CDSPs
` [PATCH v2 2/6] arm64: dts: qcom: nord-rrd: Enable "
` [PATCH v2 3/6] arm64: dts: qcom: nord: Add the SPMI PMIC arbiter
` [PATCH v2 4/6] arm64: dts: qcom: nord: Add PMAU0102 and PMM8650AU PMIC support
` [PATCH v2 5/6] dt-bindings: arm: qcom: Document Nord Ride Embedded board
` [PATCH v2 6/6] arm64: dts: qcom: Add initial support for "
[PATCH 0/2] platform: arm64: Add Radxa SVC GLINK support
2026-09-04 9:44 UTC (3+ messages)
` [PATCH 1/2] platform: arm64: Add Radxa SVC GLINK driver
[PATCH v2 0/2] Add pinctrl support for MSM8952
2026-09-04 9:43 UTC (5+ messages)
` [PATCH v2 2/2] pinctrl: qcom: Add MSM8952 tlmm pinctrl driver
[PATCH RFC v2 0/6] Speakers for Pixel 3 / 3 XL
2026-09-04 9:26 UTC (5+ messages)
` [PATCH RFC v2 5/6] ASoC: cs35l36: Implement set_tdm_slot to program RX and TX slots
[PATCH v2 0/9] soc: qcom: geni: Derive SE clock configuration from OPP table on SA8255P
2026-09-04 9:01 UTC (11+ messages)
` [PATCH v2 3/9] soc: qcom: geni-se: Add helper to set SE clock rate via OPP
` [PATCH v2 4/9] soc: qcom: geni-se: Remove OPP rate reset from resource deactivation
` [PATCH v2 7/9] i2c: qcom-geni: Vote for SE clock rate using OPP
[PATCH v10 00/10] Support for block device NVMEM providers
2026-09-04 8:49 UTC (3+ messages)
` [PATCH v10 01/10] dt-bindings: mmc: Document fixed-layout NVMEM provider support
[PATCH v4 0/5] USB4 mode programming for QMMPHY on X1E
2026-09-04 8:05 UTC (5+ messages)
` [PATCH v4 3/5] phy: qualcomm: qmp-combo: Add preliminary USB4 support
[PATCH] tty: serial: qcom_geni: don't ida_free() the console port line
2026-09-04 8:04 UTC (4+ messages)
[PATCH] dt-bindings: rtc: qcom-pm8xxx: Document PMM8654AU RTC
2026-09-04 7:45 UTC
[PATCH v2 0/7] usb: dwc3: qcom: Add firmware-managed resource support for SA8255P
2026-09-04 6:09 UTC (3+ messages)
` [PATCH v2 5/7] usb: dwc3: add xhci-reset-on-resume property for power-loss resume
[PATCH v4 1/1] bus: mhi: pci_generic: fix Rolling Wireless RW151 MBIM channel ring size
2026-09-04 4:42 UTC (2+ messages)
` [PATCH v5 1/1] bus: mhi: pci_generic: add Rolling Wireless RW151 1501/1502 PCI IDs
[PATCH RFC 00/15] arm-mpam: Add basic device tree support for resctrl
2026-09-04 3:27 UTC (15+ messages)
` [PATCH RFC 06/15] arm_mpam: Fix cache ID sentinel from ~0UL to U32_MAX to match u32 return type
` [PATCH RFC 08/15] arm_mpam: Fix ris_idx type to prevent range check bypass on truncation
` [PATCH RFC 09/15] arm_mpam: Fix MSC MMIO window size to use resource_size() instead of end - start
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox