messages from 2026-10-23 11:07:26 to 2026-10-24 03:02:32 UTC [more...]
[PATCH v5 08/11] phy: qualcomm: qmp-combo: Remove VCO_DIV programming from qmp_v8_configure_dp_clocks()
2026-10-24 3:01 UTC (2+ messages)
[PATCH v5 07/11] phy: qualcomm: qmp-combo: Extract common DP PHY init sequence
2026-10-24 3:01 UTC (2+ messages)
[PATCH v5 06/11] phy: qualcomm: qmp-combo: Add v8 PCS-level drive level tables for Glymur
2026-10-24 3:01 UTC (2+ messages)
[PATCH v5 05/11] phy: qualcomm: qmp-combo: Add hardware-specific dp_aux_cfg2 and dp_phy_cfg1 fields
2026-10-24 3:01 UTC (2+ messages)
[PATCH v5 04/11] phy: qualcomm: qmp-combo: Ignore Type-C orientation for Glymur DP mode
2026-10-24 3:01 UTC (2+ messages)
[PATCH v5 03/11] phy: qualcomm: qmp-combo: Update link rate specific DP PHY tables
2026-10-24 3:01 UTC (2+ messages)
[PATCH v5 02/11] phy: qualcomm: qmp-combo: Update DP PHY common init tables
2026-10-24 3:01 UTC (2+ messages)
[PATCH v5 01/11] phy: qualcomm: qmp-combo: Add DP COM v8 header and fix register layout
2026-10-24 3:01 UTC (2+ messages)
[PATCH 5/5] arm64: dts: qcom: mahua: Support GPU and GMU
2026-10-24 3:01 UTC (2+ messages)
[PATCH 3/5] drm/msm/a8xx: Add Mahua GPU support
2026-10-24 3:01 UTC (2+ messages)
[PATCH v2] drm/msm/dp: hold one runtime PM reference per plugged state
2026-10-24 2:58 UTC (2+ messages)
` [v2] "
[PATCH] clk: qcom: gcc-glymur: Use PWRSTS_RET_ON flag for USB GDSCs
2026-10-24 2:53 UTC (2+ messages)
[PATCH] scsi: ufs: core: Fix a deadlock between clock scaling and device commands
2026-10-24 2:42 UTC (2+ messages)
[PATCH v5 0/2] media: venus: fix HFI teardown races
2026-10-24 2:40 UTC (3+ messages)
` [PATCH v5 1/2] media: venus: hfi: disable IRQ before freeing HFI device
` [PATCH v5 2/2] media: venus: disable recovery work before HFI teardown
[PATCH v3 0/2] media: venus: fix HFI teardown races
2026-10-24 2:33 UTC (5+ messages)
` [PATCH v4 "
` [PATCH v4 2/2] media: venus: disable recovery work before HFI teardown
[PATCH v2] iio: adc: qcom-spmi-adc5-gen3: fix lock annotations on mutex helpers
2026-10-24 2:30 UTC (6+ messages)
HP OmniBook X 16 (X2 Elite, Mahua): DT bring-up report and questions
2026-10-24 1:06 UTC (5+ messages)
[PATCH v3 0/4] Fix PSCI on MSM8917 and MSM8937
2026-10-24 0:59 UTC (4+ messages)
` [PATCH v3 3/4] arm64: dts: qcom: msm8917: Use a shallower cluster state to fix unresponsive idle
[PATCH RFC RFT] drm/msm: adreno: attach the GMU device to a driver
2026-10-24 0:41 UTC (2+ messages)
[PATCH v8 0/9] drm: handle IRQ_HPD events correctly
2026-10-24 0:35 UTC (10+ messages)
` [PATCH v8 1/9] drm/connector: report out-of-band IRQ_HPD events
` [PATCH v8 2/9] drm/connector: pass down IRQ_HPD to the drivers
` [PATCH v8 3/9] drm/bridge: "
` [PATCH v8 4/9] drm/bridge: pass extra events to the HPD callback
` [PATCH v8 5/9] drm/bridge: aux-hpd: let drivers pass IRQ_HPD events
` [PATCH v8 6/9] drm/msm/dp: don't take extra references on multiple plug events
` [PATCH v8 7/9] drm/msm/dp: handle the IRQ_HPD events reported by USB-C
` [PATCH v8 8/9] soc: qcom: pmic-glink-altmode: pass down HPD_IRQ events
` [PATCH v8 9/9] usb: typec: ucsi: huawei-gaokun: "
[PATCH 0/3] phy: core, qcom-mipi-csi2: add generic MIPI C-PHY support
2026-10-23 23:46 UTC (9+ messages)
` [PATCH 1/3] phy: core: add generic MIPI C-PHY configuration API
` [PATCH 2/3] phy: qcom-mipi-csi2: Add sa8775p C-PHY support
[RFC PATCH 00/13] Enable LPAC on a7xx series GPUs
2026-10-23 23:36 UTC (12+ messages)
` [PATCH RFC 03/13] drm/msm: look for lpac from dts
[PATCH v5 00/10] drm/msm: fix SMMU fault dumps
2026-10-23 23:25 UTC (11+ messages)
` [PATCH v5 01/10] drm/msm: serialise framebuffer pin state
` [PATCH v5 02/10] drm/msm: fix framebuffer pin refcount leak on prepare failure
` [PATCH v5 03/10] drm/msm: release scanout framebuffers only after a vblank
` [PATCH v5 04/10] drm/msm/mdp5: flush the interface before starting the timing engine
` [PATCH v5 05/10] drm/msm/dpu: clear the CWB blocks left by a previous reservation
` [PATCH v5 06/10] drm/msm/dpu: clear the CDM block "
` [PATCH v5 07/10] drm/msm/dpu: clear the DSPP pointer when no DSPP is assigned
` [PATCH v5 08/10] drm/msm/dpu: clear the DSC blocks left by a previous reservation
` [PATCH v5 09/10] drm/msm/dpu: only reassign resources when the encoder is reprogrammed
` [PATCH v5 10/10] drm/ci: mark pixel-format tests as passing on SC7180
[PATCH v3 00/14] drm/msm: fix the error handling of the KMS init
2026-10-23 23:19 UTC (15+ messages)
` [PATCH v3 01/14] drm/msm: fail the snapshot init when its worker cannot be created
` [PATCH v3 02/14] drm/msm/mdp5: forget the hardware blocks of a previous bind
` [PATCH v3 03/14] drm/msm: unwind msm_drm_kms_init() on failure
` [PATCH v3 04/14] drm/msm: order the display snapshot sources around its worker
` [PATCH v3 05/14] drm/msm: clean up after a failed msm_kms_init()
` [PATCH v3 06/14] drm/msm: let the kms drivers clean up a failed kms_init()
` [PATCH v3 07/14] drm/msm/mdp5: unwind a failed mdp5_kms_init()
` [PATCH v3 08/14] drm/msm/mdp4: unwind a failed mdp4_kms_init()
` [PATCH v3 09/14] drm/msm/dpu: don't tear down a failed hw_init twice
` [PATCH v3 10/14] drm/msm: tear down only a successfully initialised KMS
` [PATCH v3 11/14] drm/msm/dpu: clean up the self-refresh helpers on teardown
` [PATCH v3 12/14] drm/msm/dpu: unwind a failed dpu_kms_hw_init() step by step
` [PATCH v3 13/14] drm/msm/mdp4: disable the vdd regulator on teardown
` [PATCH v3 14/14] drm/msm: drop the runtime PM flags from the KMS teardown
[PATCH bluetooth] Bluetooth: qca: Fix the WCN3950 NVM baud rate offset
2026-10-23 23:16 UTC (3+ messages)
[PATCH 0/7] media: qcom: camss: Add Waipio CAMSS support
2026-10-23 22:44 UTC (10+ messages)
` [PATCH 1/7] dt-bindings: phy: qcom,x1e80100-csi2-phy: Add Waipio compatible
` [PATCH 2/7] arm64: dts: qcom: sm8450: Add CSI2 PHY device tree nodes
` [PATCH 3/7] dt-bindings: media: Add description of Qualcomm Waipio CAMSS IP
` [PATCH 4/7] arm64: dts: qcom: sm8450: Add CAMSS device tree node
` [PATCH 5/7] arm64: dts: qcom: sm8450: Add description of pins with MCLK function
` [PATCH 6/7] media: qcom: camss: Allow CSI2 PHY devices without CSIPHY resources
` [PATCH 7/7] media: qcom: camss: Add Waipio CAMSS support
[PATCH 0/4] media: qcom: camss: share VFE clock sources on SM8250
2026-10-23 21:44 UTC (13+ messages)
` [PATCH 1/4] media: qcom: camss: clamp VFE clock rates to the highest level
` [PATCH 2/4] media: qcom: camss: sm8250: do not set VFE core clock rates from CSID
` [PATCH 3/4] media: qcom: camss: share VFE clock sources by the highest rate
` [PATCH 4/4] media: qcom: camss: sm8250: set the camera NoC AXI rate from the VFE
[PATCH v3 0/4] drm/msm/adreno: Add Adreno 620
2026-10-23 21:09 UTC (3+ messages)
` [PATCH v3 1/4] dt-bindings: display: msm: Document Adreno 620 and its GMU
[PATCH RFC 0/2] interconnect: qcom: sdm845: Drop the bootloader vote on ALC
2026-10-23 20:02 UTC (3+ messages)
[PATCH v2 0/2] dmaengine: qcom: bam_dma: Fixes for unbind
2026-10-23 19:38 UTC (3+ messages)
` [PATCH v2 1/2] dmaengine: qcom: bam_dma: Take a PM ref at remove()
[RFC] drm/msm/dpu: glymur (DPU 12.2) second DSC block at +0x84000?
2026-10-23 18:39 UTC
[PATCH v5 0/2] Add device tree for Acer Swift Go Pro AI (SFA14-11)
2026-10-23 18:05 UTC (3+ messages)
` [PATCH v5 1/2] dt-bindings: arm: qcom: Add "
` [PATCH v5 2/2] arm64: dts: qcom: Add support for "
[PATCH] ASoC: codecs: lpass-macro: release macro and dcodec clocks in runtime suspend
2026-10-23 17:32 UTC
[RFC PATCH 00/23] ASoC: qcom: AudioReach Active speaker protection for WSA884x
2026-10-23 17:14 UTC (24+ messages)
` [RFC PATCH 01/23] ASoC: soc-core: allow default ch_maps on links with more than 8 DAIs
` [RFC PATCH 02/23] ASoC: soc-pcm: add multi_direction_codecs link flag
` [RFC PATCH 03/23] ASoC: qcom: sdw: add per-direction stream runtimes for multi_direction links
` [RFC PATCH 04/23] ASoC: dt-bindings: qcom,wsa8840: allow one sound DAI cell
` [RFC PATCH 05/23] ASoC: codecs: wsa884x: add VI sense capture DAI
` [RFC PATCH 06/23] ASoC: codecs: wsa884x: register the die temperature as a thermal zone
` [RFC PATCH 07/23] ASoC: qcom: audioreach: add control link support to graphs
` [RFC PATCH 08/23] ASoC: qcom: audioreach: run VI module in calibration mode with per-speaker events
` [RFC PATCH 09/23] ASoC: qcom: q6apm-dai: add S32_LE format support
` [RFC PATCH 10/23] ASoC: qcom: audioreach: support up to four speakers in VI feedback
` [RFC PATCH 11/23] ASoC: qcom: audioreach: cache VI calibration results per speaker
` [RFC PATCH 12/23] ASoC: qcom: audioreach: make the speaker protection operation mode configurable
` [RFC PATCH 13/23] ASoC: qcom: audioreach: send cached R0/T0 to the VI module in normal mode
` [RFC PATCH 14/23] ASoC: qcom: audioreach: send static cfg blobs to speaker protection modules
` [RFC PATCH 15/23] ASoC: qcom: audioreach: add speaker protection mixer controls
` [RFC PATCH 16/23] ASoC: qcom: audioreach: pin SPEAKER_PROTECTION_VI media format
` [RFC PATCH 17/23] ASoC: qcom: audioreach: add live speaker temperature (T0) readback
` [RFC PATCH 18/23] ASoC: qcom: audioreach: add speaker protection calibration state control
` [RFC PATCH 19/23] ASoC: qcom: audioreach: keep the last VI calibration result until the DSP reports
` [RFC PATCH 20/23] ASoC: qcom: x1e80100: carry WSA VI feedback on the WSA Playback BE link
` [RFC PATCH 21/23] ASoC: qcom: x1e80100: register WSA speaker thermal zones for speaker protection
` [RFC PATCH 22/23] arm64: dts: qcom: glymur-crd: add WSA speaker protection VI feedback
` [RFC PATCH 23/23] arm64: dts: qcom: mahua-t14s: "
[PATCH 0/7] ASoC: qcom: AudioReach and WSA88xx fixes
2026-10-23 17:13 UTC (8+ messages)
` [PATCH 1/7] ASoC: qcom: audioreach: fix module cfg blob size handling
` [PATCH 2/7] ASoC: codecs: wsa884x: Accept temperatures across the full trim range
` [PATCH 3/7] ASoC: codecs: wsa883x: "
` [PATCH 4/7] ASoC: codecs: wsa884x: disable runtime PM on unbind
` [PATCH 5/7] ASoC: codecs: wsa883x: "
` [PATCH 6/7] ASoC: codecs: wsa884x: Fix VI sense port channel count
` [PATCH 7/7] ASoC: codecs: wsa883x: "
[PATCH 0/2] arm64: dts: qcom: sdm630: Fix the CPU idle states
2026-10-23 16:27 UTC (6+ messages)
` [PATCH 1/2] arm64: dts: qcom: sdm630: Drop the cluster "
[PATCH v5 00/13] media: iris: Migrate iommus to iris sub nodes
2026-10-23 15:41 UTC (3+ messages)
` [PATCH v5 04/13] iommu: of_iommu: Add support for "iommu-ranges" on a device node
[PATCH v2 00/14] drm/msm: fix the error handling of the KMS init
2026-10-23 15:31 UTC (15+ messages)
` [PATCH v2 01/14] drm/msm: fail the snapshot init when its worker cannot be created
` [PATCH v2 02/14] drm/msm/mdp5: forget the hardware blocks of a previous bind
` [PATCH v2 03/14] drm/msm: unwind msm_drm_kms_init() on failure
` [PATCH v2 04/14] drm/msm: order the display snapshot sources around its worker
` [PATCH v2 05/14] drm/msm: clean up after a failed msm_kms_init()
` [PATCH v2 06/14] drm/msm: let the kms drivers clean up a failed kms_init()
` [PATCH v2 07/14] drm/msm/mdp5: unwind a failed mdp5_kms_init()
` [PATCH v2 08/14] drm/msm/mdp4: unwind a failed mdp4_kms_init()
` [PATCH v2 09/14] drm/msm/dpu: don't tear down a failed hw_init twice
` [PATCH v2 10/14] drm/msm: tear down only a successfully initialised KMS
` [PATCH v2 11/14] drm/msm/dpu: clean up the self-refresh helpers on teardown
` [PATCH v2 12/14] drm/msm/dpu: unwind a failed dpu_kms_hw_init() step by step
` [PATCH v2 13/14] drm/msm/mdp4: disable the vdd regulator on teardown
` [PATCH v2 14/14] drm/msm: drop the runtime PM flags from the KMS teardown
[PATCH v11 0/9] media: qcom: camss: CAMSS Offline Processing Engine support
2026-10-23 15:16 UTC (11+ messages)
` [PATCH v11 1/9] media: qcom: camss: Add V4L2 meta format for CAMSS ISP parameters
` [PATCH v11 2/9] dt-bindings: media: qcom: Add CAMSS Offline Processing Engine (OPE)
` [PATCH v11 3/9] dt-bindings: media: qcom,qcm2290-camss-ope: Document shikra compatible
` [PATCH v11 4/9] media: uapi: Add CAMSS ISP configuration definition
` [PATCH v11 5/9] media: Documentation: uapi: Add qcom-camss ISP params documentation
` [PATCH v11 6/9] media: qcom: camss: Add CAMSS Offline Processing Engine driver
` [PATCH v11 7/9] arm64: dts: qcom: agatti: Add OPE node
` [PATCH v11 8/9] arm64: dts: qcom: shikra: "
` [PATCH v11 9/9] arm64: defconfig: Enable Qualcomm CAMSS OPE driver
Adreno 829 (SM8845) zap shader: PAS init rejected by TZ under Gunyah
2026-10-23 15:10 UTC (2+ messages)
[PATCH v3 0/4] arm64: dts: qcom: ipq5018: add Ubiquiti UniFi U6 Enterprise
2026-10-23 14:02 UTC (7+ messages)
` [PATCH v3 1/4] dt-bindings: net: wireless: qcom,ath11k-pci: add QCN9074
` [PATCH v3 2/4] dt-bindings: arm: qcom: add Ubiquiti UniFi U6 Enterprise
` [PATCH v3 3/4] arm64: dts: qcom: ipq5018: enable the PRNG by default
` [PATCH v3 4/4] arm64: dts: qcom: ipq5018: add Ubiquiti UniFi U6 Enterprise
[PATCH v7 0/9] drm: handle IRQ_HPD events correctly
2026-10-23 13:58 UTC (11+ messages)
` [PATCH v7 1/9] drm/connector: report out-of-band IRQ_HPD events
` [PATCH v7 2/9] drm/connector: pass down IRQ_HPD to the drivers
` [PATCH v7 3/9] drm/bridge: "
` [PATCH v7 4/9] drm/bridge: pass extra events to the HPD callback
` [PATCH v7 5/9] drm/bridge: aux-hpd: let drivers pass IRQ_HPD events
` [PATCH v7 6/9] drm/msm/dp: don't take extra references on multiple plug events
` [PATCH v7 7/9] drm/msm/dp: handle the IRQ_HPD events reported by USB-C
` [PATCH v7 8/9] soc: qcom: pmic-glink-altmode: pass down HPD_IRQ events
` [PATCH v7 9/9] usb: typec: ucsi: huawei-gaokun: "
[PATCH] power: supply: qcom_battmgr: do not report power_now on SM8750
2026-10-23 13:55 UTC (12+ messages)
` [Regression v3] SM8750: cambistmclkcc + camcc together hard-reset the SoC on display blank
[REPORT] SM8750 bonded dual-DSI + NT36536: first DCS command-DMA timeout on cold boot (DMA engine stays latched; DSI-side reset does not clear it)
2026-10-23 13:49 UTC (3+ messages)
` [REPORT] SM8750 bonded dual-DSI + NT36536: first DCS command-DMA timeout on cold boot
[PATCH v2 0/3] arm64: dts: qcom: ipq5018: add Ubiquiti UniFi U6 Enterprise
2026-10-23 13:28 UTC (4+ messages)
` [PATCH v2 3/3] "
[PATCH v4 0/2] Add device tree for Acer Swift Go Pro AI (SFA14-11)
2026-10-23 13:00 UTC (7+ messages)
` [PATCH v4 0/2] Add device tree for Acer Swift Go Pro AI
[PATCH v1 0/2] i2c: qcom-cci, media: ov02c10: Fix camera power cycling
2026-10-23 12:53 UTC (3+ messages)
` [PATCH v1 2/2] media: ov02c10: Fix sensor power sequencing
[PATCH v5] arm64: dts: qcom: x1e78100-thinkpad-t14s: Add thermal zones for PMICs
2026-10-23 12:39 UTC
[PATCH] phy: qcom: qmp-combo: Leave the USB PCS alone in DP-only mode
2026-10-23 12:36 UTC (4+ messages)
[PATCH v2] phy: qcom: qmp-combo: Leave the USB PCS alone in DP-only mode
2026-10-23 12:35 UTC
[PATCH] scsi: ufs: qcom: Reprogram ESI after a host controller reset
2026-10-23 12:34 UTC (3+ messages)
[PATCH RFC] phy: qcom: snps-femto-v2: clear charger-detection state on entry to host mode
2026-10-23 12:31 UTC
[PATCH 0/3] arm64: dts: qcom: sa8255p: add ethernet nodes
2026-10-23 12:32 UTC (8+ messages)
` [PATCH 1/3] arm64: dts: qcom: lemans: fix iommus SID mask for "
` [PATCH 2/3] arm64: dts: qcom: lemans: make the emac compatible specific to the embedded variant
` [PATCH 3/3] arm64: dts: qcom: lemans-sa8255p: add ethernet nodes
[PATCH v2 0/8] Enable more nodes for the Xperia 10 III
2026-10-23 12:05 UTC (3+ messages)
` [PATCH v2 2/8] arm64: dts: qcom: sm6350-lena: Add qcom,rmtfs-mem node
[PATCH v3 0/8] arm-mpam: Add basic device tree support for resctrl
2026-10-23 12:03 UTC (9+ messages)
` [PATCH DNM v3 8/8] arm64: dts: qcom: kaanapali: Add MPAM MSC nodes for the L2 caches
[PATCH] serial: qcom-geni: Add tracepoints for SE reg dump
2026-10-23 12:02 UTC (2+ messages)
[PATCH v2 0/3] i2c: qcom-geni: Add I2C bus recovery support
2026-10-23 11:57 UTC (4+ messages)
` [PATCH v2 1/3] dmaengine: qcom: gpi: Add I2C bus recovery opcode support
` [PATCH v2 2/3] i2c: qcom-geni: Add bus recovery support for FIFO mode
` [PATCH v2 3/3] i2c: qcom-geni: Add bus recovery support for GPI DMA mode
[PATCH net-next v3 0/2] net: wwan: qcom_bam_dmux: Add restricted DMA pool support
2026-10-23 11:57 UTC (3+ messages)
` [PATCH net-next v3 1/2] dt-bindings: net: qcom,bam-dmux: Add memory-region and qcom,vmid properties
[PATCH v4 0/5] Add UFS support for Glymur Qualcomm SoC
2026-10-23 11:55 UTC (3+ messages)
` [PATCH v4 3/5] arm64: dts: qcom: glymur: Add UFS nodes
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox