Re: [PATCH v5 7/7] arm64: dts: sdm845: Add tsens nodes

[Amit Kucheria <amit.kucheria@linaro.org>]

On Mon, Jul 9, 2018 at 4:57 PM, Amit Kucheria <amit.kucheria@linaro.org> wrote:
> SDM845 has two tsens blocks, one with 13 sensors and the other with 8
> sensors. It uses version 2 of the TSENS IP, so use the fallback property to
> allow more common code.
>
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index cdaabeb..d97ee00 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -221,6 +221,22 @@
>                         #interrupt-cells = <2>;
>                 };
>
> +               tsens0: tsens@c222000 {

Oops, sending out v6 to fix this.

> +                       compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
> +                       reg = <0xc263000 0x1ff>, /* TM */
> +                             <0xc222000 0x1ff>; /* SROT */
> +                       #qcom,sensors = <13>;
> +                       #thermal-sensor-cells = <1>;
> +               };
> +
> +               tsens1: tsens@c223000 {
> +                       compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
> +                       reg = <0xc265000 0x1ff>, /* TM */
> +                             <0xc223000 0x1ff>; /* SROT */
> +                       #qcom,sensors = <8>;
> +                       #thermal-sensor-cells = <1>;
> +               };
> +
>                 spmi_bus: spmi@c440000 {
>                         compatible = "qcom,spmi-pmic-arb";
>                         reg = <0xc440000 0x1100>,
> --
> 2.7.4
>