From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Shawn Guo <shawn.guo@linaro.org>
Cc: Andy Gross <agross@kernel.org>,
Akash Asthana <akashast@codeaurora.org>,
linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH] soc: qcom: geni: shield ICC calls for ACPI boot
Date: Wed, 13 Jan 2021 22:12:51 -0600 [thread overview]
Message-ID: <X//Ew1EvY47UgTf9@builder.lan> (raw)
In-Reply-To: <20201228135625.4971-1-shawn.guo@linaro.org>
On Mon 28 Dec 07:56 CST 2020, Shawn Guo wrote:
> Currently, GENI devices like i2c-qcom-geni fails to probe in ACPI boot,
> if interconnect support is enabled. That's because interconnect driver
> only supports DT right now. As interconnect is not necessarily required
> for basic function of GENI devices, let's shield those ICC calls to get
> GENI devices probe for ACPI boot.
>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---
> drivers/soc/qcom/qcom-geni-se.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
> index f42954e2c98e..9feb1d78a5df 100644
> --- a/drivers/soc/qcom/qcom-geni-se.c
> +++ b/drivers/soc/qcom/qcom-geni-se.c
> @@ -760,6 +760,9 @@ int geni_icc_get(struct geni_se *se, const char *icc_ddr)
> int i, err;
> const char *icc_names[] = {"qup-core", "qup-config", icc_ddr};
>
> + if (has_acpi_companion(se->dev))
> + return 0;
> +
> for (i = 0; i < ARRAY_SIZE(se->icc_paths); i++) {
> if (!icc_names[i])
> continue;
> @@ -785,6 +788,9 @@ int geni_icc_set_bw(struct geni_se *se)
> {
> int i, ret;
>
> + if (has_acpi_companion(se->dev))
Can't we simply rely on the fact that icc_set_bw(), icc_enable() and
icc_disable() all return successfully when passed a path of NULL?
That would reduce this patch to only modifying geni_icc_get(), which
presumably would be the place the modify once there is a mechanism to
acquire paths in ACPI (if that ends up look anything like the of-based
case).
Regards,
Bjorn
> + return 0;
> +
> for (i = 0; i < ARRAY_SIZE(se->icc_paths); i++) {
> ret = icc_set_bw(se->icc_paths[i].path,
> se->icc_paths[i].avg_bw, se->icc_paths[i].avg_bw);
> @@ -803,6 +809,9 @@ void geni_icc_set_tag(struct geni_se *se, u32 tag)
> {
> int i;
>
> + if (has_acpi_companion(se->dev))
> + return;
> +
> for (i = 0; i < ARRAY_SIZE(se->icc_paths); i++)
> icc_set_tag(se->icc_paths[i].path, tag);
> }
> @@ -813,6 +822,9 @@ int geni_icc_enable(struct geni_se *se)
> {
> int i, ret;
>
> + if (has_acpi_companion(se->dev))
> + return 0;
> +
> for (i = 0; i < ARRAY_SIZE(se->icc_paths); i++) {
> ret = icc_enable(se->icc_paths[i].path);
> if (ret) {
> @@ -830,6 +842,9 @@ int geni_icc_disable(struct geni_se *se)
> {
> int i, ret;
>
> + if (has_acpi_companion(se->dev))
> + return 0;
> +
> for (i = 0; i < ARRAY_SIZE(se->icc_paths); i++) {
> ret = icc_disable(se->icc_paths[i].path);
> if (ret) {
> --
> 2.17.1
>
next prev parent reply other threads:[~2021-01-14 4:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-28 13:56 [PATCH] soc: qcom: geni: shield ICC calls for ACPI boot Shawn Guo
2021-01-13 23:17 ` AngeloGioacchino Del Regno
2021-01-14 3:18 ` Shawn Guo
2021-01-14 4:12 ` Bjorn Andersson [this message]
2021-01-14 11:25 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=X//Ew1EvY47UgTf9@builder.lan \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=akashast@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox