From: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
To: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: rafael.j.wysocki@intel.com, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org,
Guillaume La Roque <glaroque@baylibre.com>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Amit Kucheria <amitk@kernel.org>, Zhang Rui <rui.zhang@intel.com>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@broadcom.com>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Thara Gopinath <thara.gopinath@gmail.com>,
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Kunihiko Hayashi <hayashi.kunihiko@socionext.com>,
Masami Hiramatsu <mhiramat@kernel.org>,
ye xingchen <ye.xingchen@zte.com.cn>,
Ricardo Neri <ricardo.neri-calderon@linux.intel.com>,
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>,
Haowen Bai <baihaowen@meizu.com>,
Minghao Chi <chi.minghao@zte.com.cn>,
"open list:THERMAL DRIVER FOR AMLOGIC SOCS"
<linux-amlogic@lists.infradead.org>,
"moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE"
<linux-rpi-kernel@lists.infradead.org>,
"moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE"
<linux-arm-kernel@lists.infradead.org>,
"open list:ARM/QUALCOMM SUPPORT" <linux-arm-msm@vger.kernel.org>,
"open list:RENESAS R-CAR THERMAL DRIVERS"
<linux-renesas-soc@vger.kernel.org>,
"open list:SAMSUNG THERMAL DRIVER"
<linux-samsung-soc@vger.kernel.org>,
"moderated list:ARM/STM32 ARCHITECTURE"
<linux-stm32@st-md-mailman.stormreply.com>,
"open list:TEGRA ARCHITECTURE SUPPORT"
<linux-tegra@vger.kernel.org>
Subject: Re: [PATCH] thermal: Remove core header inclusion from drivers
Date: Mon, 6 Feb 2023 18:00:53 +0100 [thread overview]
Message-ID: <Y+EyRb9klmwwHGjn@oden.dyn.berto.se> (raw)
In-Reply-To: <20230206153432.1017282-1-daniel.lezcano@linaro.org>
Hi Daniel,
Thanks for your work.
On 2023-02-06 16:34:29 +0100, Daniel Lezcano wrote:
> As the name states "thermal_core.h" is the header file for the core
> components of the thermal framework.
>
> Too many drivers are including it. Hopefully the recent cleanups
> helped to self encapsulate the code a bit more and prevented the
> drivers to need this header.
>
> Remove this inclusion in every place where it is possible.
>
> Some other drivers did a confusion with the core header and the one
> exported in linux/thermal.h. They include the former instead of the
> latter. The changes also fix this.
>
> The tegra/soctherm driver still remains as it uses an internal
> function which need to be replaced.
>
> The Intel HFI driver uses the netlink internal framework core and
> should be changed to prevent to deal with the internals.
>
> No functional changes
>
> [ Applies to thermal/linux-next or linux-pm/linux-next ]
>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> ---
> drivers/thermal/amlogic_thermal.c | 1 -
> drivers/thermal/armada_thermal.c | 2 --
> drivers/thermal/broadcom/bcm2835_thermal.c | 1 -
> drivers/thermal/hisi_thermal.c | 3 +--
> drivers/thermal/imx8mm_thermal.c | 1 -
> drivers/thermal/imx_sc_thermal.c | 1 -
> drivers/thermal/intel/intel_hfi.c | 3 ++-
> drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 1 -
> drivers/thermal/qoriq_thermal.c | 1 -
> drivers/thermal/rcar_gen3_thermal.c | 1 -
For R-Car,
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> drivers/thermal/samsung/exynos_tmu.c | 3 +--
> drivers/thermal/st/stm_thermal.c | 1 -
> drivers/thermal/tegra/tegra30-tsensor.c | 1 -
> drivers/thermal/uniphier_thermal.c | 2 --
> 14 files changed, 4 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c
> index d30cb791e63c..9235fda4ec1e 100644
> --- a/drivers/thermal/amlogic_thermal.c
> +++ b/drivers/thermal/amlogic_thermal.c
> @@ -28,7 +28,6 @@
> #include <linux/regmap.h>
> #include <linux/thermal.h>
>
> -#include "thermal_core.h"
> #include "thermal_hwmon.h"
>
> #define TSENSOR_CFG_REG1 0x4
> diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
> index 83a4080bffc7..36653f692c80 100644
> --- a/drivers/thermal/armada_thermal.c
> +++ b/drivers/thermal/armada_thermal.c
> @@ -19,8 +19,6 @@
> #include <linux/regmap.h>
> #include <linux/interrupt.h>
>
> -#include "thermal_core.h"
> -
> /* Thermal Manager Control and Status Register */
> #define PMU_TDC0_SW_RST_MASK (0x1 << 1)
> #define PMU_TM_DISABLE_OFFS 0
> diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c
> index 3d0710c6e004..23918bb76ae6 100644
> --- a/drivers/thermal/broadcom/bcm2835_thermal.c
> +++ b/drivers/thermal/broadcom/bcm2835_thermal.c
> @@ -18,7 +18,6 @@
> #include <linux/platform_device.h>
> #include <linux/thermal.h>
>
> -#include "../thermal_core.h"
> #include "../thermal_hwmon.h"
>
> #define BCM2835_TS_TSENSCTL 0x00
> diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
> index 45226cab466e..62c67942293e 100644
> --- a/drivers/thermal/hisi_thermal.c
> +++ b/drivers/thermal/hisi_thermal.c
> @@ -16,8 +16,7 @@
> #include <linux/platform_device.h>
> #include <linux/io.h>
> #include <linux/of_device.h>
> -
> -#include "thermal_core.h"
> +#include <linux/thermal.h>
>
> #define HI6220_TEMP0_LAG (0x0)
> #define HI6220_TEMP0_TH (0x4)
> diff --git a/drivers/thermal/imx8mm_thermal.c b/drivers/thermal/imx8mm_thermal.c
> index d247b48696cb..72b5d6f319c1 100644
> --- a/drivers/thermal/imx8mm_thermal.c
> +++ b/drivers/thermal/imx8mm_thermal.c
> @@ -17,7 +17,6 @@
> #include <linux/slab.h>
> #include <linux/thermal.h>
>
> -#include "thermal_core.h"
> #include "thermal_hwmon.h"
>
> #define TER 0x0 /* TMU enable */
> diff --git a/drivers/thermal/imx_sc_thermal.c b/drivers/thermal/imx_sc_thermal.c
> index 378f574607f7..f32e59e74623 100644
> --- a/drivers/thermal/imx_sc_thermal.c
> +++ b/drivers/thermal/imx_sc_thermal.c
> @@ -13,7 +13,6 @@
> #include <linux/slab.h>
> #include <linux/thermal.h>
>
> -#include "thermal_core.h"
> #include "thermal_hwmon.h"
>
> #define IMX_SC_MISC_FUNC_GET_TEMP 13
> diff --git a/drivers/thermal/intel/intel_hfi.c b/drivers/thermal/intel/intel_hfi.c
> index 6e604bda2b93..c69db6c90869 100644
> --- a/drivers/thermal/intel/intel_hfi.c
> +++ b/drivers/thermal/intel/intel_hfi.c
> @@ -40,10 +40,11 @@
>
> #include <asm/msr.h>
>
> -#include "../thermal_core.h"
> #include "intel_hfi.h"
> #include "thermal_interrupt.h"
>
> +#include "../thermal_netlink.h"
> +
> /* Hardware Feedback Interface MSR configuration bits */
> #define HW_FEEDBACK_PTR_VALID_BIT BIT(0)
> #define HW_FEEDBACK_CONFIG_HFI_ENABLE_BIT BIT(0)
> diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
> index e2429676d0d2..101c75d0e13f 100644
> --- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
> +++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
> @@ -15,7 +15,6 @@
> #include <linux/regmap.h>
> #include <linux/thermal.h>
>
> -#include "../thermal_core.h"
> #include "../thermal_hwmon.h"
>
> #define QPNP_TM_REG_DIG_MAJOR 0x01
> diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
> index d111e218f362..431c29c0898a 100644
> --- a/drivers/thermal/qoriq_thermal.c
> +++ b/drivers/thermal/qoriq_thermal.c
> @@ -13,7 +13,6 @@
> #include <linux/thermal.h>
> #include <linux/units.h>
>
> -#include "thermal_core.h"
> #include "thermal_hwmon.h"
>
> #define SITES_MAX 16
> diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
> index 4ef927437842..0fd2fd077638 100644
> --- a/drivers/thermal/rcar_gen3_thermal.c
> +++ b/drivers/thermal/rcar_gen3_thermal.c
> @@ -17,7 +17,6 @@
> #include <linux/sys_soc.h>
> #include <linux/thermal.h>
>
> -#include "thermal_core.h"
> #include "thermal_hwmon.h"
>
> /* Register offsets */
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index 37465af59262..527d1eb0663a 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -20,11 +20,10 @@
> #include <linux/of_irq.h>
> #include <linux/platform_device.h>
> #include <linux/regulator/consumer.h>
> +#include <linux/thermal.h>
>
> #include <dt-bindings/thermal/thermal_exynos.h>
>
> -#include "../thermal_core.h"
> -
> /* Exynos generic registers */
> #define EXYNOS_TMU_REG_TRIMINFO 0x0
> #define EXYNOS_TMU_REG_CONTROL 0x20
> diff --git a/drivers/thermal/st/stm_thermal.c b/drivers/thermal/st/stm_thermal.c
> index e7834ccc7976..735401958f01 100644
> --- a/drivers/thermal/st/stm_thermal.c
> +++ b/drivers/thermal/st/stm_thermal.c
> @@ -19,7 +19,6 @@
> #include <linux/platform_device.h>
> #include <linux/thermal.h>
>
> -#include "../thermal_core.h"
> #include "../thermal_hwmon.h"
>
> /* DTS register offsets */
> diff --git a/drivers/thermal/tegra/tegra30-tsensor.c b/drivers/thermal/tegra/tegra30-tsensor.c
> index 0ffe37ce7df7..b3218b71b6d9 100644
> --- a/drivers/thermal/tegra/tegra30-tsensor.c
> +++ b/drivers/thermal/tegra/tegra30-tsensor.c
> @@ -28,7 +28,6 @@
>
> #include <soc/tegra/fuse.h>
>
> -#include "../thermal_core.h"
> #include "../thermal_hwmon.h"
>
> #define TSENSOR_SENSOR0_CONFIG0 0x0
> diff --git a/drivers/thermal/uniphier_thermal.c b/drivers/thermal/uniphier_thermal.c
> index f8ab2ca76184..47801841b3f5 100644
> --- a/drivers/thermal/uniphier_thermal.c
> +++ b/drivers/thermal/uniphier_thermal.c
> @@ -17,8 +17,6 @@
> #include <linux/regmap.h>
> #include <linux/thermal.h>
>
> -#include "thermal_core.h"
> -
> /*
> * block registers
> * addresses are the offset from .block_base
> --
> 2.34.1
>
--
Kind Regards,
Niklas Söderlund
next prev parent reply other threads:[~2023-02-06 17:01 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-06 15:34 [PATCH] thermal: Remove core header inclusion from drivers Daniel Lezcano
2023-02-06 15:53 ` Miquel Raynal
2023-02-06 17:00 ` Niklas Söderlund [this message]
2023-02-06 22:35 ` Florian Fainelli
2023-02-07 11:38 ` Thierry Reding
2023-02-07 13:33 ` Neil Armstrong
2023-02-08 9:49 ` Kunihiko Hayashi
2023-02-10 9:40 ` Daniel Lezcano
2023-02-13 15:38 ` Rafael J. Wysocki
2023-02-11 2:10 ` Ricardo Neri
2023-02-11 7:53 ` Daniel Lezcano
2023-02-11 16:32 ` srinivas pandruvada
2023-02-12 3:23 ` Ricardo Neri
2023-02-13 12:45 ` Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y+EyRb9klmwwHGjn@oden.dyn.berto.se \
--to=niklas.soderlund@ragnatech.se \
--cc=agross@kernel.org \
--cc=alexandre.torgue@foss.st.com \
--cc=alim.akhtar@samsung.com \
--cc=amitk@kernel.org \
--cc=andersson@kernel.org \
--cc=baihaowen@meizu.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=bzolnier@gmail.com \
--cc=chi.minghao@zte.com.cn \
--cc=daniel.lezcano@linaro.org \
--cc=f.fainelli@gmail.com \
--cc=festevam@gmail.com \
--cc=glaroque@baylibre.com \
--cc=hayashi.kunihiko@socionext.com \
--cc=jonathanh@nvidia.com \
--cc=kernel@pengutronix.de \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux-tegra@vger.kernel.org \
--cc=mcoquelin.stm32@gmail.com \
--cc=mhiramat@kernel.org \
--cc=miquel.raynal@bootlin.com \
--cc=rafael.j.wysocki@intel.com \
--cc=rafael@kernel.org \
--cc=ricardo.neri-calderon@linux.intel.com \
--cc=rjui@broadcom.com \
--cc=rui.zhang@intel.com \
--cc=s.hauer@pengutronix.de \
--cc=sbranden@broadcom.com \
--cc=shawnguo@kernel.org \
--cc=srinivas.pandruvada@linux.intel.com \
--cc=thara.gopinath@gmail.com \
--cc=thierry.reding@gmail.com \
--cc=ye.xingchen@zte.com.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).