Re: [PATCH v5 16/17] qcom: llcc/edac: Support polling mode for ECC handling

[Borislav Petkov <bp@alien8.de>]

On Wed, Dec 28, 2022 at 02:10:27PM +0530, Manivannan Sadhasivam wrote:
>  static int qcom_llcc_edac_probe(struct platform_device *pdev)
>  {
>  	struct llcc_drv_data *llcc_driv_data = pdev->dev.platform_data;
> @@ -355,22 +361,31 @@ static int qcom_llcc_edac_probe(struct platform_device *pdev)
>  	edev_ctl->ctl_name = "llcc";
>  	edev_ctl->panic_on_ue = LLCC_ERP_PANIC_ON_UE;
>  
> +	/* Check if LLCC driver has passed ECC IRQ */
> +	ecc_irq = llcc_driv_data->ecc_irq;
> +	if (ecc_irq > 0) {
> +		/* Use interrupt mode if IRQ is available */
> +		edac_op_state = EDAC_OPSTATE_INT;
> +	} else {
> +		/* Fall back to polling mode otherwise */
> +		edac_op_state = EDAC_OPSTATE_POLL;
> +		edev_ctl->poll_msec = ECC_POLL_MSEC;
> +		edev_ctl->edac_check = llcc_ecc_check;
> +	}
> +
>  	rc = edac_device_add_device(edev_ctl);
>  	if (rc)
>  		goto out_mem;
>  
>  	platform_set_drvdata(pdev, edev_ctl);
>  
> -	/* Request for ecc irq */
> -	ecc_irq = llcc_driv_data->ecc_irq;
> -	if (ecc_irq < 0) {
> -		rc = -ENODEV;
> -		goto out_dev;
> -	}
> -	rc = devm_request_irq(dev, ecc_irq, llcc_ecc_irq_handler,
> +	/* Request ECC IRQ if available */
> +	if (ecc_irq > 0) {
> +		rc = devm_request_irq(dev, ecc_irq, llcc_ecc_irq_handler,
>  			      IRQF_TRIGGER_HIGH, "llcc_ecc", edev_ctl);

You need to request the IRQ first and then set edac_op_state above. I.e., this
devm_request_irq() needs to move in the if (ecc_irq > 0) branch above.

-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette