Re: [PATCH v4 0/3] Add USB/DP combo PHY config for SM6350

[Vinod Koul <vkoul@kernel.org>]

On 23-01-23, 14:29, Luca Weiss wrote:
> While this patchset started out as just adding a dedicated init sequence
> for SM6350 since USB PHY init didn't work in some cases, now it's also
> migrating the phy config and dts over to a new format.
> 
> Also note, that the DP portions are pratically untested since TCPM
> (type-C port manager) and possibly other components aren't brought up
> yet.

Applied 1-2, thanks

> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>

cover doesnt need sob :)

> ---
> Changes in v4:
> - Fix dp_serdes offsets in driver, add dp_txa & dp_txb fields (as in v2)
> - Fix order of resets in dtsi
> - Link to v3: https://lore.kernel.org/r/20221130081430.67831-1-luca.weiss@fairphone.com
> 
> ---
> Luca Weiss (3):
>       dt-bindings: phy: qcom,qmp-usb3-dp: Add sm6350 compatible
>       phy: qcom-qmp-combo: Add config for SM6350
>       arm64: dts: qcom: sm6350: Use specific qmpphy compatible
> 
>  .../phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml         |   1 +
>  arch/arm64/boot/dts/qcom/sm6350.dtsi               |  54 +++-----
>  drivers/phy/qualcomm/phy-qcom-qmp-combo.c          | 139 ++++++++++++++++++++-
>  3 files changed, 154 insertions(+), 40 deletions(-)
> ---
> base-commit: d514392f17fd4d386cfadde7f849d97db4ca1fb0
> change-id: 20230120-sm6350-usbphy-87c5e3f0218e
> 
> Best regards,
> -- 
> Luca Weiss <luca.weiss@fairphone.com>

-- 
~Vinod