Re: [PATCH v3 2/2] pinctrl: qcom: sc8180x: add ACPI probe support

[Andy Shevchenko <andriy.shevchenko@intel.com>]

On Thu, Mar 04, 2021 at 02:05:20PM +0800, Shawn Guo wrote:
> It adds ACPI probe support for pinctrl-sc8180x driver.
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---
>  drivers/pinctrl/qcom/Kconfig           |  2 +-
>  drivers/pinctrl/qcom/pinctrl-sc8180x.c | 39 ++++++++++++++++++++++++--
>  2 files changed, 38 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
> index 6853a896c476..9f0218c4f9b3 100644
> --- a/drivers/pinctrl/qcom/Kconfig
> +++ b/drivers/pinctrl/qcom/Kconfig
> @@ -222,7 +222,7 @@ config PINCTRL_SC7280
>  
>  config PINCTRL_SC8180X
>  	tristate "Qualcomm Technologies Inc SC8180x pin controller driver"
> -	depends on GPIOLIB && OF
> +	depends on GPIOLIB && (OF || ACPI)
>  	select PINCTRL_MSM
>  	help
>  	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the
> diff --git a/drivers/pinctrl/qcom/pinctrl-sc8180x.c b/drivers/pinctrl/qcom/pinctrl-sc8180x.c
> index 66f76ed22200..45ecb4a022ca 100644
> --- a/drivers/pinctrl/qcom/pinctrl-sc8180x.c
> +++ b/drivers/pinctrl/qcom/pinctrl-sc8180x.c
> @@ -1546,6 +1546,13 @@ static const struct msm_pingroup sc8180x_groups[] = {
>  	[193] = SDC_QDSD_PINGROUP(sdc2_data, 0x4b2000, 9, 0),
>  };
>  
> +static const int sc8180x_acpi_reserved_gpios[] = {
> +	0, 1, 2, 3,
> +	47, 48, 49, 50,
> +	126, 127, 128, 129,
> +	-1 /* terminator */
> +};

Wondering if this is converted to valid_mask at some point?

>  static const struct msm_gpio_wakeirq_map sc8180x_pdc_map[] = {
>  	{ 3, 31 }, { 5, 32 }, { 8, 33 }, { 9, 34 }, { 10, 100 }, { 12, 104 },
>  	{ 24, 37 }, { 26, 38 }, { 27, 41 }, { 28, 42 }, { 30, 39 }, { 36, 43 },
> @@ -1575,13 +1582,40 @@ static struct msm_pinctrl_soc_data sc8180x_pinctrl = {
>  	.nwakeirq_map = ARRAY_SIZE(sc8180x_pdc_map),
>  };
>  
> +static const struct msm_pinctrl_soc_data sc8180x_acpi_pinctrl = {
> +	.pins = sc8180x_pins,
> +	.npins = ARRAY_SIZE(sc8180x_pins),
> +	.groups = sc8180x_groups,
> +	.ngroups = ARRAY_SIZE(sc8180x_groups),
> +	.reserved_gpios = sc8180x_acpi_reserved_gpios,
> +	.ngpios = 191,
> +};
> +
>  static int sc8180x_pinctrl_probe(struct platform_device *pdev)
>  {
> -	return msm_pinctrl_probe(pdev, &sc8180x_pinctrl);
> +	const struct msm_pinctrl_soc_data *soc_data;
> +
> +	soc_data = device_get_match_data(&pdev->dev);

#include <linux/property.h>

> +	if (!soc_data)
> +		return -EINVAL;
> +
> +	return msm_pinctrl_probe(pdev, soc_data);
>  }
>  
> +static const struct acpi_device_id sc8180x_pinctrl_acpi_match[] = {

#include <linux/mod_devicetable.h>

> +	{
> +		.id = "QCOM040D",
> +		.driver_data = (kernel_ulong_t) &sc8180x_acpi_pinctrl,
> +	},
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(acpi, sc8180x_pinctrl_acpi_match);
> +
>  static const struct of_device_id sc8180x_pinctrl_of_match[] = {
> -	{ .compatible = "qcom,sc8180x-tlmm", },
> +	{
> +		.compatible = "qcom,sc8180x-tlmm",
> +		.data = &sc8180x_pinctrl,
> +	},
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(of, sc8180x_pinctrl_of_match);
> @@ -1590,6 +1624,7 @@ static struct platform_driver sc8180x_pinctrl_driver = {
>  	.driver = {
>  		.name = "sc8180x-pinctrl",
>  		.of_match_table = sc8180x_pinctrl_of_match,
> +		.acpi_match_table = sc8180x_pinctrl_acpi_match,
>  	},
>  	.probe = sc8180x_pinctrl_probe,
>  	.remove = msm_pinctrl_remove,
> -- 
> 2.17.1
> 

-- 
With Best Regards,
Andy Shevchenko