Re: [PATCH v6 1/5] remoteproc: qcom: qcom_wcnss: Add support for pronto-v3

[Stephan Gerhold <stephan@gerhold.net>]

On Sat, Oct 01, 2022 at 08:43:40AM +0530, Sireesh Kodali wrote:
> From: Vladimir Lypak <vladimir.lypak@gmail.com>
> 
> Pronto-v3 is similar to pronto-v2. It requires two power domains, one
> regulator, and it requires the xo clock. It is used on the MSM8953
> platform.
> 
> Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
> Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>

Reviewed-by: Stephan Gerhold <stephan@gerhold.net>

> ---
>  drivers/remoteproc/qcom_wcnss.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
> index 68f37296b151..f599d5d5719d 100644
> --- a/drivers/remoteproc/qcom_wcnss.c
> +++ b/drivers/remoteproc/qcom_wcnss.c
> @@ -141,6 +141,17 @@ static const struct wcnss_data pronto_v2_data = {
>  	.num_vregs = 1,
>  };
>  
> +static const struct wcnss_data pronto_v3_data = {
> +	.pmu_offset = 0x1004,
> +	.spare_offset = 0x1088,
> +
> +	.pd_names = { "mx", "cx" },
> +	.vregs = (struct wcnss_vreg_info[]) {
> +		{ "vddpx", 1800000, 1800000, 0 },
> +	},
> +	.num_vregs = 1,
> +};
> +
>  static int wcnss_load(struct rproc *rproc, const struct firmware *fw)
>  {
>  	struct qcom_wcnss *wcnss = (struct qcom_wcnss *)rproc->priv;
> @@ -675,6 +686,7 @@ static const struct of_device_id wcnss_of_match[] = {
>  	{ .compatible = "qcom,riva-pil", &riva_data },
>  	{ .compatible = "qcom,pronto-v1-pil", &pronto_v1_data },
>  	{ .compatible = "qcom,pronto-v2-pil", &pronto_v2_data },
> +	{ .compatible = "qcom,pronto-v3-pil", &pronto_v3_data },
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(of, wcnss_of_match);
> -- 
> 2.37.3
>