From: Abel Vesa <abel.vesa@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] arm64: dts: qcom: Add SMB2360 pmic dtsi
Date: Tue, 12 Dec 2023 11:42:32 +0200 [thread overview]
Message-ID: <ZXgrCHNkz20Weqjq@linaro.org> (raw)
In-Reply-To: <20231212-x1e80100-dts-smb2360-v1-1-c28bb4d7105e@linaro.org>
On 23-12-12 11:39:52, Abel Vesa wrote:
> Add nodes for SMB2360 in separate dtsi file.
> Also add the eUSB2 repeater nodes.
>
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
On a second thought, please ignore this one.
This depends on the SPMI multi master work.
Will send proper version later on.
> arch/arm64/boot/dts/qcom/smb2360.dtsi | 51 +++++++++++++++++++++++++++++++++++
> 1 file changed, 51 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/smb2360.dtsi b/arch/arm64/boot/dts/qcom/smb2360.dtsi
> new file mode 100644
> index 000000000000..782746a20403
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/smb2360.dtsi
> @@ -0,0 +1,51 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023, Linaro Limited
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/spmi/spmi.h>
> +
> +/ {
> +};
> +
> +&spmi1_bus {
> + smb2360h: pmic@7 {
> + compatible = "qcom,sm2360", "qcom,spmi-pmic";
> + reg = <0x7 SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + smb2360_1_eusb2_repeater: phy@fd00 {
> + compatible = "qcom,smb2360-eusb2-repeater";
> + reg = <0xfd00>;
> + #phy-cells = <0>;
> + };
> + };
> +
> + smb2360k: pmic@a {
> + compatible = "qcom,sm2360", "qcom,spmi-pmic";
> + reg = <0xa SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + smb2360_2_eusb2_repeater: phy@fd00 {
> + compatible = "qcom,smb2360-eusb2-repeater";
> + reg = <0xfd00>;
> + #phy-cells = <0>;
> + };
> + };
> +
> + smb2360l: pmic@b {
> + compatible = "qcom,sm2360", "qcom,spmi-pmic";
> + reg = <0xb SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + smb2360_3_eusb2_repeater: phy@fd00 {
> + compatible = "qcom,smb2360-eusb2-repeater";
> + reg = <0xfd00>;
> + #phy-cells = <0>;
> + };
> + };
> +};
>
> ---
> base-commit: bbd220ce4e29ed55ab079007cff0b550895258eb
> change-id: 20231201-x1e80100-dts-smb2360-0c7c25f2e0a7
>
> Best regards,
> --
> Abel Vesa <abel.vesa@linaro.org>
>
prev parent reply other threads:[~2023-12-12 9:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-12 9:39 [PATCH] arm64: dts: qcom: Add SMB2360 pmic dtsi Abel Vesa
2023-12-12 9:42 ` Abel Vesa [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZXgrCHNkz20Weqjq@linaro.org \
--to=abel.vesa@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox