Re: [PATCH v5 1/5] media: dt-bindings: venus: Add qcm2290 dt schema

[Jorge Ramirez <jorge.ramirez@oss.qualcomm.com>]

On 27/06/25 17:36:43, Vikash Garodia wrote:
> 
> On 6/26/2025 7:29 PM, Jorge Ramirez-Ortiz wrote:
> > Add a schema for the venus video encoder/decoder on the qcm2290.
> > 
> > Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com>
> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> > ---
> >  .../bindings/media/qcom,qcm2290-venus.yaml    | 127 ++++++++++++++++++
> >  1 file changed, 127 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/qcom,qcm2290-venus.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/media/qcom,qcm2290-venus.yaml b/Documentation/devicetree/bindings/media/qcom,qcm2290-venus.yaml
> > new file mode 100644
> > index 000000000000..a9f89b545334
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/qcom,qcm2290-venus.yaml
> > @@ -0,0 +1,127 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/qcom,qcm2290-venus.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm QCM2290 Venus video encode and decode accelerators
> > +
> > +maintainers:
> > +  - Vikash Garodia <quic_vgarodia@quicinc.com>
> > +
> > +description:
> > +  The Venus AR50_LITE IP is a video encode and decode accelerator present
> > +  on Qualcomm platforms
> > +
> > +allOf:
> > +  - $ref: qcom,venus-common.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    const: qcom,qcm2290-venus
> > +
> > +  power-domains:
> > +    maxItems: 3
> > +
> > +  power-domain-names:
> > +    items:
> > +      - const: venus
> > +      - const: vcodec0
> > +      - const: cx
> > +
> > +  clocks:
> > +    maxItems: 6
> > +
> > +  clock-names:
> > +    items:
> > +      - const: core
> > +      - const: iface
> > +      - const: bus
> > +      - const: throttle
> > +      - const: vcodec0_core
> > +      - const: vcodec0_bus
> > +
> > +  iommus:
> > +    minItems: 1
> > +    maxItems: 5
> 2 should be good to support non secure usecases. 5 not needed.

ok

> > +
> > +  interconnects:
> > +    maxItems: 2
> > +
> > +  interconnect-names:
> > +    items:
> > +      - const: video-mem
> > +      - const: cpu-cfg
> > +
> > +  operating-points-v2: true
> > +  opp-table:
> > +    type: object
> > +
> > +required:
> > +  - compatible
> > +  - power-domain-names
> > +  - iommus
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
> > +    #include <dt-bindings/interconnect/qcom,qcm2290.h>
> > +    #include <dt-bindings/interconnect/qcom,rpm-icc.h>
> > +    #include <dt-bindings/power/qcom-rpmpd.h>
> > +
> > +    venus: video-codec@5a00000 {
> > +        compatible = "qcom,qcm2290-venus";
> > +        reg = <0x5a00000 0xf0000>;
> > +        interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
> > +
> > +        power-domains = <&gcc GCC_VENUS_GDSC>,
> > +                        <&gcc GCC_VCODEC0_GDSC>,
> > +                        <&rpmpd QCM2290_VDDCX>;
> > +        power-domain-names = "venus",
> > +                             "vcodec0",
> > +                             "cx";
> > +        operating-points-v2 = <&venus_opp_table>;
> > +
> > +        clocks = <&gcc GCC_VIDEO_VENUS_CTL_CLK>,
> > +                 <&gcc GCC_VIDEO_AHB_CLK>,
> > +                 <&gcc GCC_VENUS_CTL_AXI_CLK>,
> > +                 <&gcc GCC_VIDEO_THROTTLE_CORE_CLK>,
> > +                 <&gcc GCC_VIDEO_VCODEC0_SYS_CLK>,
> > +                 <&gcc GCC_VCODEC0_AXI_CLK>;
> > +        clock-names = "core",
> > +                       "iface",
> > +                       "bus",
> > +                       "throttle",
> > +                       "vcodec0_core",
> > +                       "vcodec0_bus";
> > +
> > +        memory-region = <&pil_video_mem>;
> > +        iommus = <&apps_smmu 0x860 0x0>,
> > +                 <&apps_smmu 0x880 0x0>,
> > +                 <&apps_smmu 0x861 0x04>,
> > +                 <&apps_smmu 0x863 0x0>,
> > +                 <&apps_smmu 0x804 0xE0>;
> update this accordingly.
> > +
> > +        interconnects = <&mmnrt_virt MASTER_VIDEO_P0 RPM_ALWAYS_TAG
> > +                         &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
> > +                        <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG
> > +                         &config_noc SLAVE_VENUS_CFG RPM_ACTIVE_TAG>;
> > +        interconnect-names = "video-mem",
> > +                             "cpu-cfg";
> > +
> > +        venus_opp_table: opp-table {
> > +            compatible = "operating-points-v2";
> > +
> > +            opp-133000000 {
> > +                opp-hz = /bits/ 64 <133000000>;
> > +                required-opps = <&rpmpd_opp_low_svs>;
> > +            };
> This value is incorrect, fix it to 133330000.
> > +            opp-240000000 {
> > +                opp-hz = /bits/ 64 <240000000>;
> > +                required-opps = <&rpmpd_opp_svs>;
> Do you see other corners in the reference catalog as well, not just the
> downstream code ? OR did you limit this as the usecase do not demand higher corner ?

there was an internal AR50_LITE presentation where only these two
claimed to be supported - all of the others were not. so I went for the
most restrictive option (ie, this one).

how do you want me to proceed then? should I just use IPCAT, or downstream?


> 
> Regards,
> Vikash
> > +            };
> > +        };
> > +    };