Re: [PATCH RESEND v6 0/5] spmi: pmic-arb: Add support for multiple buses

[Neil Armstrong <neil.armstrong@linaro.org>]

Hi Abel,

On 26/03/2024 17:28, Abel Vesa wrote:
> This RFC prepares for and adds support for 2 buses, which is supported
> in HW starting with version 7. Until now, none of the currently
> supported platforms in upstream have used the second bus. The X1E80100
> platform, on the other hand, needs the second bus for the USB2.0 to work
> as there are 3 SMB2360 PMICs which provide eUSB2 repeaters and they are
> all found on the second bus.

@Dmitry, @Konrad, @Bjorn, could you apply those patches and test an devices
you have to make sure there's no regression ?

> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
> Changes in v6:
> - Changed the compatible to platform specific (X1E80100) along with the
>    schema. Fixed the spmi buses unit addresses and added the empty ranges
>    property. Added missing properties to the spmi buses and the
>    "unevaluatedProperties: false".
> - Deprecated the "qcom,bus-id" in the legacy schema.
> - Changed the driver to check for legacy compatible first
> - Link to v5: https://lore.kernel.org/r/20240221-spmi-multi-master-support-v5-0-3255ca413a0b@linaro.org
> 
> Changes in v5:
> - Dropped the RFC as there aren't any concerns about the approach anymore
> - Dropped the unused dev and res variables from pmic_arb_get_obsrvr_chnls_v2
> - Link to v4: https://lore.kernel.org/r/20240220-spmi-multi-master-support-v4-0-dc813c878ba8@linaro.org
> 
> Changes in v4:
> - Fixed comment above pmic_arb_init_apid_v7 by dropping the extra "bus" word
> - Swicthed to devm_platform_ioremap_resource_byname for obsrvr and chnls.
>    The core remains with platform_get_resource_byname as we need the core size.
> - Dropped comment from probe related to the need of platform_get_resource_byname
>    as it not true anymore.
> - Dropped the qcom,bus-id optional property.
> - Link to v3: https://lore.kernel.org/r/20240214-spmi-multi-master-support-v3-0-0bae0ef04faf@linaro.org
> 
> Changes in v3:
> - Split the change into 3 separate patches. First 2 patches are moving
>    apid init and core resources into version specific ops. Third one is
>    adding the support for 2 buses and dedicated compatible.
> - Added separate bindings patch
> - Link to v2: https://lore.kernel.org/r/20240213-spmi-multi-master-support-v2-1-b3b102326906@linaro.org
> 
> Changes in v2:
> - Reworked it so that it registers a spmi controller for each bus
>    rather than relying on the generic framework to pass on the bus
>    (master) id.
> - Link to v1: https://lore.kernel.org/r/20240207-spmi-multi-master-support-v1-0-ce57f301c7fd@linaro.org
> 
> ---
> Abel Vesa (5):
>        dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
>        dt-bindings: spmi: Deprecate qcom,bus-id

Forgot to add, but please fix this in a v7:

>        spmi: pmic-arb: Make the APID init a version operation

drivers/spmi/spmi-pmic-arb.c:180: warning: Function parameter or struct member 'core' not described in 'spmi_pmic_arb'
drivers/spmi/spmi-pmic-arb.c:180: warning: Function parameter or struct member 'core_size' not described in 'spmi_pmic_arb'
drivers/spmi/spmi-pmic-arb.c:180: warning: Function parameter or struct member 'mapping_table_valid' not described in 'spmi_pmic_arb'
drivers/spmi/spmi-pmic-arb.c:243: warning: Function parameter or struct member 'pmic_arb' not described in 'pmic_arb_read_data'
drivers/spmi/spmi-pmic-arb.c:257: warning: Function parameter or struct member 'pmic_arb' not described in 'pmic_arb_write_data'

>        spmi: pmic-arb: Make core resources acquiring a version operation

drivers/spmi/spmi-pmic-arb.c:180: warning: Function parameter or struct member 'core' not described in 'spmi_pmic_arb'
drivers/spmi/spmi-pmic-arb.c:180: warning: Function parameter or struct member 'core_size' not described in 'spmi_pmic_arb'
drivers/spmi/spmi-pmic-arb.c:180: warning: Function parameter or struct member 'mapping_table_valid' not described in 'spmi_pmic_arb'
drivers/spmi/spmi-pmic-arb.c:222: warning: Function parameter or struct member 'get_core_resources' not described in 'pmic_arb_ver_ops'
drivers/spmi/spmi-pmic-arb.c:244: warning: Function parameter or struct member 'pmic_arb' not described in 'pmic_arb_read_data'
drivers/spmi/spmi-pmic-arb.c:258: warning: Function parameter or struct member 'pmic_arb' not described in 'pmic_arb_write_data'

>        spmi: pmic-arb: Add multi bus support
> 
>   .../bindings/spmi/qcom,spmi-pmic-arb.yaml          |   1 +
>   .../bindings/spmi/qcom,x1e80100-spmi-pmic-arb.yaml | 136 +++
>   drivers/spmi/spmi-pmic-arb.c                       | 948 +++++++++++++--------
>   3 files changed, 715 insertions(+), 370 deletions(-)
> ---
> base-commit: 4893c639cc3659cefaa675bf1e59f4e7571afb5c
> change-id: 20240207-spmi-multi-master-support-832a704b779b
> 
> Best regards,

Thanks,
Neil