Re: [PATCH v2 7/9] arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 4.03.2025 10:56 PM, Melody Olvera wrote:
> From: Wesley Cheng <quic_wcheng@quicinc.com>
> 
> Add the base USB devicetree definitions for SM8750 platforms.  The overall
> chipset contains a single DWC3 USB3 controller (rev. 200a), SS QMP PHY
> (rev. v8) and M31 eUSB2 PHY.  The major difference for SM8750 is the
> transition to using the M31 eUSB2 PHY compared to previous SoCs.
> 
> Enable USB support on SM8750 MTP and QRD variants. SM8750 has a QMP combo
> PHY for the SSUSB path, and a M31 eUSB2 PHY for the HSUSB path.
> 
> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
> ---

[...]

> +		usb_1: usb@a6f8800 {
> +			compatible = "qcom,sm8750-dwc3", "qcom,dwc3";
> +			reg = <0x0 0x0a6f8800 0x0 0x400>;
> +			status = "disabled";
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;

Please follow property order / general style found in x1e80100.dtsi

> +
> +			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
> +				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
> +				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
> +				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
> +				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
> +				 <&tcsrcc TCSR_USB3_CLKREF_EN>;
> +			clock-names = "cfg_noc",
> +				      "core",
> +				      "iface",
> +				      "sleep",
> +				      "mock_utmi",
> +				      "xo";
> +
> +			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
> +					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
> +			assigned-clock-rates = <19200000>, <200000000>;
> +
> +			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
> +						  <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
> +					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
> +					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
> +					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "pwr_event",
> +					  "hs_phy_irq",
> +					  "dp_hs_phy_irq",
> +					  "dm_hs_phy_irq",
> +					  "ss_phy_irq";
> +
> +			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
> +			required-opps = <&rpmhpd_opp_nom>;
> +
> +			resets = <&gcc GCC_USB30_PRIM_BCR>;
> +
> +			interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,

QCOM_ICC_TAG_ALWAYS

> +					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;

QCOM_ICC_TAG_ACTIVE_ONLY

Konrad