Re: [PATCH v8 4/5] arm64: dts: qcom: kodiak: Add OPP-table for ICE UFS and ICE eMMC nodes

[Abhinaba Rakshit <abhinaba.rakshit@oss.qualcomm.com>]

On Fri, Apr 10, 2026 at 04:23:51PM +0530, Kuldeep Singh wrote:
> On 4/9/2026 5:14 PM, Abhinaba Rakshit wrote:
> > Qualcomm Inline Crypto Engine (ICE) platform driver now, supports
> > an optional OPP-table.
> > 
> > Add OPP-table for ICE UFS and ICE eMMC device nodes for Kodiak
> > platform.
> > 
> > Signed-off-by: Abhinaba Rakshit <abhinaba.rakshit@oss.qualcomm.com>
> > ---
> >  arch/arm64/boot/dts/qcom/kodiak.dtsi | 42 ++++++++++++++++++++++++++++++++++++
> >  1 file changed, 42 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/kodiak.dtsi b/arch/arm64/boot/dts/qcom/kodiak.dtsi
> > index c899a17026fd2a10ebc528a816629c88ee3bde5d..b0aa1970d42a3bb0b9d371e0e6cd09b8cd164dbe 100644
> > --- a/arch/arm64/boot/dts/qcom/kodiak.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/kodiak.dtsi
> > @@ -1087,6 +1087,27 @@ sdhc_ice: crypto@7c8000 {
> >  			clock-names = "core",
> >  				      "iface";
> >  			power-domains = <&rpmhpd SC7280_CX>;
> > +
> > +			operating-points-v2 = <&ice_mmc_opp_table>;
> > +
> > +			ice_mmc_opp_table: opp-table {
> > +				compatible = "operating-points-v2";
> > +
> > +				opp-100000000 {
> > +					opp-hz = /bits/ 64 <100000000>;
> > +					required-opps = <&rpmhpd_opp_low_svs>;
> > +				};
> > +
> > +				opp-150000000 {
> > +					opp-hz = /bits/ 64 <150000000>;
> > +					required-opps = <&rpmhpd_opp_svs>;
> > +				};
> > +
> > +				opp-300000000 {
> > +					opp-hz = /bits/ 64 <300000000>;
> > +					required-opps = <&rpmhpd_opp_nom>;
> 
> As per hardware spec, 300MHz is supported by SVS_L1.

Sure, will update this in next patchset.

Abhinaba Rakshit